{"title":"Basshead Supply","description":"\u003ch2\u003eBasshead Supply Subwoofer Enclosures\u003c\/h2\u003e\u003cp\u003eExplore Basshead Supply subwoofer enclosure listings for Resilient Sounds Gold and Platinum V2 applications. Single- and dual-subwoofer layouts are listed by the intended driver size and series.\u003c\/p\u003e\u003ch3\u003eChoose the right equipment\u003c\/h3\u003e\u003cp\u003eMatch the exact subwoofer model, quantity and mounting dimensions to the enclosure. Check whether drivers are included or the box is supplied unloaded, and compare external dimensions with the space in your vehicle. A matching nominal diameter alone does not confirm enclosure suitability.\u003c\/p\u003e","products":[{"product_id":"resilient-sounds-single-15-platinum-v2-ported-enclosure","title":"Resilient Sounds Single 15\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a single-subwoofer system around the Resilient Sounds Platinum v2 15\" with this purpose-designed ported enclosure. Its 3.5 cubic-foot chamber is tuned to 32 Hz for deep bass, while rigid Baltic Birch construction and a generous port support high-output use.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum v2 fit:\u003c\/strong\u003e The 14.236\" cutout is sized for the Resilient Sounds Platinum v2 15\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Hz tuning:\u003c\/strong\u003e The tuned chamber supports deep bass extension with controlled cone motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50.4 sq in port area:\u003c\/strong\u003e The wide port supports airflow at high output and helps reduce compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 1\" (24mm), 17-ply Russian Baltic Birch helps limit panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify amplifier connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible exterior screw holes create a clean appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSingle 15\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubwoofer fit\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds Platinum v2 15\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume and tuning\u003c\/td\u003e\n\u003ctd\u003e3.5 cubic feet @ 32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e50.4 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 3.15\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e14.236\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch, 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront baffle\u003c\/td\u003e\n\u003ctd\u003e1\" front baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 18.0\", Width 30.375\", Depth 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior design\u003c\/td\u003e\n\u003ctd\u003eZero visible screw holes on the exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGluing\u003c\/td\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order. Ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a defined chamber volume and tuning target with a 50.4 sq in port, giving you specific design details to consider when planning a high-power, single-subwoofer build. Its Baltic Birch panels, reinforced front baffle, and fully glued construction are designed to maintain enclosure rigidity.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray finish and screw-free exterior suit a build where the enclosure remains visible. The pre-wired connection also means the enclosure arrives with 10ga OFC wiring and a metal binding post in place.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm that your subwoofer is the Resilient Sounds Platinum v2 15\" and that its mounting requirements match the 14.236\" cutout. Check the enclosure’s 18.0\" height, 30.375\" width, and 20.0\" depth against your intended installation space.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is described for high-power systems. Plan for its built-to-order lead time of 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Platinum v2 15\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has a net volume of 3.5 cubic feet and is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eHow much space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003eIts external dimensions are 18.0\" high, 30.375\" wide, and 20.0\" deep. Measure your installation area before planning the build.\u003c\/p\u003e\n\u003ch3\u003eHow does the enclosure connect to an amplifier?\u003c\/h3\u003e\n\u003cp\u003eIt has pre-wired 10ga OFC wiring and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build lead time?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet, and explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e to learn more about the brand.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229326052,"sku":"BHSP-RES-PTV2-S15-HD","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_c20dfc93-d778-47cd-ac62-7addce5be942.png?v=1789261134"},{"product_id":"resilient-sounds-single-12-platinum-v2-ported-enclosure","title":"Resilient Sounds Single 12\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your Resilient Sounds Platinum v2 12-inch subwoofer a purpose-built home with this single 12-inch ported enclosure. Its 2.25 cubic-foot net volume and 32 Hz tuning are designed for deep, controlled bass in a clean-finished birch cabinet.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray stain and polyurethane topcoat bring a polished look to your installation, while the zero-visible-screw exterior keeps the finish uncluttered.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built fit:\u003c\/strong\u003e Designed specifically for the Resilient Sounds Platinum v2 12-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted design:\u003c\/strong\u003e A 32 Hz tuning supports strong low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid birch construction:\u003c\/strong\u003e Seventeen plies and a 1-inch front baffle help limit panel flex under heavy bass signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e No visible exterior screw holes create a show-ready appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring ready:\u003c\/strong\u003e Pre-wired 10-gauge OFC cable and a metal binding post simplify connecting the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandcrafted assembly:\u003c\/strong\u003e Built in the USA and fully glued with Titebond III for airtight integrity.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSingle 12\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Platinum v2 12\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e2.25 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e32.2 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e14.0\" x 2.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch; 17 plies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 16.0\", Width 25.25\", Depth 19.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExterior\u003c\/th\u003e\n\u003ctd\u003eZero visible screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eArrives ready to wire up your subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order. Ships in 2-3 weeks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs defined internal volume and port dimensions with a 32 Hz tuning, giving your Platinum v2 setup a design tailored to its intended subwoofer. Its rigid birch panels and thicker front baffle are built for demanding, high-output applications, while the finished exterior suits a show-quality installation.\u003c\/p\u003e\n\u003cp\u003eThe stated dimensions make it suitable for a variety of trunk and rear-deck installations. The carbon gray finish offers a refined alternative to an unfinished enclosure.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the available installation space against the enclosure’s 16.0\" height, 25.25\" width, and 19.0\" depth. The 11.175\" cutout is specified for the intended 12\" subwoofer. This enclosure is engineered specifically for the Resilient Sounds Platinum v2 12\" model.\u003c\/p\u003e\n\u003cp\u003eIt arrives ready to wire up your subwoofer. The enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Platinum v2 12\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the ported design offer?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure uses a 32 Hz tuning for strong low-frequency performance and controlled output.\u003c\/p\u003e\n\u003ch3\u003eWhat should I measure before installation?\u003c\/h3\u003e\n\u003cp\u003eCheck your available space against the enclosure’s height, width, and depth, and confirm the mounting cutout suits your subwoofer.\u003c\/p\u003e\n\u003ch3\u003eIs the enclosure ready to wire?\u003c\/h3\u003e\n\u003cp\u003eYes. It is pre-wired with 10ga OFC and a metal binding post, and arrives ready to wire up your subwoofer.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eWant to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab). Shop 12 Volt Outlet for your subwoofer enclosure needs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229358820,"sku":"BHSP-RES-PTV2-S12-HD","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_1bfd10e2-fd63-43c7-b3c2-8d62e67a820a.png?v=1789261135"},{"product_id":"resilient-sounds-single-10-platinum-v2-ported-enclosure","title":"Resilient Sounds Single 10\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a car audio system around a ported enclosure made specifically for the Resilient Sounds Platinum v2 10-inch subwoofer. This single-subwoofer enclosure provides 1.5 cubic feet of net airspace and is tuned to 32 Hz for deep, controlled bass.\u003c\/p\u003e\n\u003cp\u003eIts carbon gray finish and clean exterior suit a show-focused installation, while the pre-wired connection helps streamline setup.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built design:\u003c\/strong\u003e Made for the Platinum v2 10-inch subwoofer, with a 9.438-inch cutout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted bass response:\u003c\/strong\u003e The 32 Hz tuning and 21.72-square-inch port area support airflow and low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 17-ply Russian Baltic Birch and a 1-inch front baffle help limit panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-connect wiring:\u003c\/strong\u003e Pre-wired 10-gauge OFC wiring and a metal binding post simplify the enclosure connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible screw holes create a finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSingle 10\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003ePlatinum v2 10\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e1.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e21.72 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e12.0\" x 1.81\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e9.438\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch, 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 14.0\", Width 25.25\", Depth 16.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction details\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA; fully glued with Titebond III; zero visible screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs defined airspace and port dimensions with the Platinum v2 10-inch subwoofer’s intended application. The port is sized to support airflow at the enclosure’s tuning frequency, while the rigid birch construction and glued joints are designed to reduce panel flex, leakage, and resonance.\u003c\/p\u003e\n\u003cp\u003eIts finished exterior keeps the installation looking considered, and the pre-wired connection avoids having to add enclosure wiring during setup.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is designed for the Resilient Sounds Platinum v2 10-inch subwoofer. Check the 9.438-inch cutout against the driver’s mounting requirements, and confirm the enclosure’s external dimensions fit your available vehicle space.\u003c\/p\u003e\n\u003cp\u003eIt is described for high-power systems, but no specific power limit or wiring configuration is listed. Match the subwoofer and amplifier requirements when planning your system. The enclosure is built to order, with a stated lead time of 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is purpose-built for the Resilient Sounds Platinum v2 10-inch subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s tuning and net volume?\u003c\/h3\u003e\n\u003cp\u003eIt has 1.5 cubic feet of net airspace and is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003eIts external dimensions are 14.0 inches high, 25.25 inches wide, and 16.0 inches deep. Check your available space before installation.\u003c\/p\u003e\n\u003ch3\u003eDoes it include wiring?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes pre-wired with 10ga OFC wiring and a metal binding post.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229391588,"sku":"BHSP-RES-PTV2-S10-HD","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_48a01119-6545-46d4-8ba7-c86e560f965d.png?v=1789261137"},{"product_id":"resilient-sounds-dual-15-platinum-v2-ported-enclosure","title":"Resilient Sounds Dual 15\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGet deep, controlled bass from a dual 15-inch setup with the Resilient Sounds Dual 15\" Platinum v2 Ported Enclosure. Its 7.0-cubic-foot volume and 32 Hz tuning are engineered specifically for Resilient Sounds Platinum v2 15-inch subwoofers.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-frequency tuning:\u003c\/strong\u003e The 32 Hz tuning targets deep bass while balancing port output at high volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerous port area:\u003c\/strong\u003e A 100.8-square-inch port is designed to move air efficiently and reduce port noise at high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid cabinet:\u003c\/strong\u003e 1-inch, 17-ply Russian Baltic Birch panels and a center brace help limit cabinet flex and resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible exterior screw holes give the enclosure a refined finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify connection to your subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-built construction:\u003c\/strong\u003e Made in the USA with Titebond III glue for fully glued, airtight seams.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePorted enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended subwoofer\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Platinum v2 15\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e7.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e100.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e18.0\" x 5.6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e14.236\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e1\" Russian Baltic Birch (17-ply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter baffle brace\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 20.0\", Width 40.0\", Depth 24.9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacture\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlue\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExterior screws\u003c\/th\u003e\n\u003ctd\u003eZero visible screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation preparation\u003c\/th\u003e\n\u003ctd\u003eArrives wired and prepared for integration with your subwoofers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a specified internal volume with low-frequency tuning for a dual 15-inch Platinum v2 installation. Its large port area supports airflow at high output, while the reinforced birch construction is designed to keep panel movement and unwanted resonance in check.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray finish and concealed exterior fasteners give the cabinet a clean appearance in a trunk or cargo area. It is built to order, so plan around the stated 2–3 week shipping lead time.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThe enclosure is designed specifically for Resilient Sounds Platinum v2 15-inch subwoofers. Check the 20.0\" height, 40.0\" width, and 24.9\" depth against your available space before installation.\u003c\/p\u003e\n\u003cp\u003eIts 14.236\" cutout and pre-wired 10ga OFC wiring are specified for the enclosure layout. Confirm your subwoofer and amplifier requirements before connecting the system; the stated power rating is “High power systems.”\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofers is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for Resilient Sounds Platinum v2 15-inch subwoofers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has a net volume of 7.0 cubic feet and is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eHow much space should I allow?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure measures 20.0\" high, 40.0\" wide, and 24.9\" deep. Check these dimensions against your intended installation area.\u003c\/p\u003e\n\u003ch3\u003eDoes the enclosure arrive wired?\u003c\/h3\u003e\n\u003cp\u003eYes. It arrives pre-wired with 10ga OFC wiring and a metal binding post, ready for integration with your subwoofers.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build-to-order lead time?\u003c\/h3\u003e\n\u003cp\u003eThe stated lead time is 2–3 weeks for shipping.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop for your next car audio upgrade at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229424356,"sku":"BHSP-RES-PTV2-D15-HD","price":1124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_82be20b6-d286-4ac9-a272-c0dd97f64c29.png?v=1789261138"},{"product_id":"resilient-sounds-dual-12-platinum-v2-ported-enclosure","title":"Resilient Sounds Dual 12\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Resilient Sounds Dual 12\" Platinum v2 Ported Enclosure gives a Platinum v2 12\" subwoofer setup a dedicated, low-frequency enclosure. Its 4.5 cubic feet of net airspace and 32 Hz tuning are designed for deep bass with controlled response.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e Baltic Birch panels, a thick front baffle, and center bracing help resist flex during deep bass transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted design:\u003c\/strong\u003e The port area and geometry support airflow for the enclosure’s tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify connecting your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished appearance:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible exterior screw holes create a clean look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandcrafted build:\u003c\/strong\u003e Made by hand in the USA and fully bonded with Titebond III.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eDual 12\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Platinum v2 12\" sub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e4.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning frequency\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e65.0 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e16.0\" x 4.063\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e11.175\" diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch, 17 plies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter brace\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 18.0\", Width 37.0\", Depth 21.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild location\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlue bond\u003c\/th\u003e\n\u003ctd\u003eTitebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a defined ported alignment with reinforced construction for a Platinum v2 12\" subwoofer build. Its bracing and rigid panels are intended to limit enclosure flex under high power, while the finished exterior suits an installation where appearance matters.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm that your subwoofer, available mounting space, and installation plan suit the 11.175\" diameter cutout and the enclosure’s 18.0\" x 37.0\" x 21.0\" dimensions. The enclosure is intended for a trunk or rear cargo area. Wiring is pre-installed and terminates at a metal binding post.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for the Resilient Sounds Platinum v2 12\" sub.\u003c\/p\u003e\n\u003ch3\u003eWhat is the enclosure’s tuning frequency?\u003c\/h3\u003e\n\u003cp\u003eThe ported enclosure is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eHow much space should I allow for installation?\u003c\/h3\u003e\n\u003cp\u003eAllow for the enclosure’s 18.0\" height, 37.0\" width, and 21.0\" depth, plus the space needed for wiring.\u003c\/p\u003e\n\u003ch3\u003eWhat is the stated build lead time?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built to order and ships in 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229457124,"sku":"BHSP-RES-PTV2-D12-HD","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_1b8724da-46f7-41d6-8207-bcf84cbd3a04.png?v=1789261139"},{"product_id":"resilient-sounds-dual-10-platinum-v2-ported-enclosure","title":"Resilient Sounds Dual 10\" Platinum v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring deep, controlled bass to a high-power car audio build with the Resilient Sounds Dual 10\" Platinum v2 Ported Enclosure. Its 3.0 cubic foot interior is tuned to 32 Hz and designed specifically for the Platinum v2 10\" subwoofer.\u003c\/p\u003e\n\u003cp\u003eRigid Russian Baltic Birch construction, internal bracing, and a clean carbon gray finish make this a purpose-built enclosure for a considered installation. Pre-wired connections simplify hooking up your system.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Hz tuning:\u003c\/strong\u003e Supports lower bass frequencies in a vented enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e43.44 sq in port area:\u003c\/strong\u003e Provides the specified vent cross-section for airflow at the target tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-ply Baltic Birch:\u003c\/strong\u003e The 1\" panels are designed to minimize flex under demanding output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced structure:\u003c\/strong\u003e A 1\" front baffle and center baffle brace add rigidity where it matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-wire connection:\u003c\/strong\u003e Pre-wired 10ga OFC wiring and a metal binding post provide a direct connection point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain, polyurethane topcoat, and no visible exterior screw holes create a clean install appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds Dual Platinum v2 10\" Ported Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume\u003c\/td\u003e\n\u003ctd\u003e3.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e43.44 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e12.0\" x 3.62\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e9.438\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm) Russian Baltic Birch, 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront baffle\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter baffle brace\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 14.0\", Width 31.375\", Depth 23.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior design\u003c\/td\u003e\n\u003ctd\u003eZero visible screw holes on the exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly\u003c\/td\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order. Ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure brings together a specified internal volume, port geometry, and 32 Hz tuning for the Platinum v2 10\" subwoofer. Its 1\" Baltic Birch panels, front baffle, and center brace are designed to limit enclosure flex in a high-power system.\u003c\/p\u003e\n\u003cp\u003eThe fully glued construction and Titebond III assembly support airtight integrity. With its stain, polyurethane topcoat, and concealed exterior screw holes, the enclosure also keeps the finished installation looking neat.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is designed for the Resilient Sounds Platinum v2 10\" subwoofer. Check that the subwoofer’s required cutout matches the listed 9.438\" cutout, and measure the installation space against the enclosure’s height, width, and depth.\u003c\/p\u003e\n\u003cp\u003eIt is pre-wired with 10ga OFC wiring and a metal binding post. The enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Platinum v2 10\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s tuning and net volume?\u003c\/h3\u003e\n\u003cp\u003eIt has a net volume of 3.0 cubic feet and is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for installation?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure measures 14.0\" high, 31.375\" wide, and 23.0\" deep. Check those dimensions against your available trunk or cargo space.\u003c\/p\u003e\n\u003ch3\u003eWhat wiring connection does it have?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC wiring and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build lead time?\u003c\/h3\u003e\n\u003cp\u003eThis enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229489892,"sku":"BHSP-RES-PTV2-D10-HD","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_7677e6ee-e377-41c1-a19f-7261d1889a84.png?v=1789261140"},{"product_id":"resilient-sounds-single-15-platinum-ported-enclosure","title":"Resilient Sounds Single 15\" Platinum Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a deep-bass foundation for your car audio system with the Resilient Sounds Single 15\" Platinum Ported Enclosure. It is designed specifically for the Resilient Sounds Platinum 15\" subwoofer, with a 3.5 cubic-foot net volume and 32 Hz tuning. Its carbon gray finish gives the enclosure a clean look in a trunk or rear compartment.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built airspace:\u003c\/strong\u003e The 3.5 cubic-foot net volume and 32 Hz tuning are designed around the Platinum 15\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort design:\u003c\/strong\u003e A 50.4 sq in port area supports airflow at the tuning frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 1\" Russian Baltic Birch with 17 plies and a 1\" front baffle helps limit cabinet flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain with a polyurethane topcoat suits a visible installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post provide a ready connection path for the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean assembly:\u003c\/strong\u003e The enclosure is fully glued with Titebond III and has no visible exterior screw holes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds Single 15\" Platinum Ported Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e3.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e50.4 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Size\u003c\/td\u003e\n\u003ctd\u003e16.0\" x 3.15\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e13.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" Russian Baltic Birch (17 ply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003e1\" front baffle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 18.0\", Width 30.125\", Depth 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior assembly\u003c\/td\u003e\n\u003ctd\u003eZero visible screw holes on the exterior; fully glued with Titebond III for airtight integrity and long-term durability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead Time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a specified volume and tuning with a port sized for the Platinum 15\", making it a dedicated option for that subwoofer rather than a generic cabinet. Its Baltic Birch construction, thick front baffle, and glued assembly are designed to reduce cabinet flex and port noise during demanding bass playback.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray finish and concealed exterior fasteners keep the cabinet visually tidy when it sits in view. Pre-wired connections also simplify the enclosure-side wiring step after the subwoofer is mounted.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is engineered specifically for the Resilient Sounds Platinum 15\" subwoofer and requires a 13.7\" cutout. Before purchasing, compare its 18.0\" height, 30.125\" width, and 20.0\" depth with the available trunk or cargo space.\u003c\/p\u003e\n\u003cp\u003eIt is described for high-power systems, but no wattage figure is listed. Check the subwoofer and amplifier requirements for your system before installation. The enclosure includes pre-wired 10ga OFC and a metal binding post.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Platinum 15\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat space and cutout should I allow?\u003c\/h3\u003e\n\u003cp\u003eAllow for the enclosure dimensions of 18.0\" high, 30.125\" wide, and 20.0\" deep. The subwoofer cutout is 13.7\".\u003c\/p\u003e\n\u003ch3\u003eWhat does the 32 Hz tuning mean for use?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is tuned to 32 Hz to target deep bass extension while maintaining port efficiency and overall control.\u003c\/p\u003e\n\u003ch3\u003eWhat amplifier power does it support?\u003c\/h3\u003e\n\u003cp\u003eIt is described for high-power systems, but no specific wattage is given. Match your amplifier to the Platinum 15\" subwoofer’s power requirements.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build lead time?\u003c\/h3\u003e\n\u003cp\u003eThis enclosure is built to order and ships in 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229522660,"sku":"BHSP-RES-PT-S15-HD","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_8fcec751-9c4d-4405-bb90-f48d959dd566.png?v=1789261142"},{"product_id":"resilient-sounds-single-12-platinum-ported-enclosure","title":"Resilient Sounds Single 12\" Platinum Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Resilient Sounds Platinum 12\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.25 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e32.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e32.2 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e14.0\" x 2.3\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e11.2\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e1\" (24mm) plywood construction\u003c\/li\u003e\r\n\u003cli\u003e17 ply birch veneer construction\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e16.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e24.0\" wide\u003c\/li\u003e\r\n\u003cli\u003e19.75\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThis is a custom made box specifically for a Resilient Sounds Platinum 12\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 1\" Baltic Birch all around we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 24mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle high power subwoofer setups. Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229555428,"sku":"BHSP-RES-PT-S12-HD","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_f37f98fe-df76-45d0-9ebc-b3bbe979709a.png?v=1789261143"},{"product_id":"resilient-sounds-dual-15-platinum-ported-enclosure","title":"Resilient Sounds Dual 15\" Platinum Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive a Resilient Sounds Platinum 15-inch subwoofer a dedicated ported enclosure with 7.0 cubic feet of net volume tuned to 32 Hz. The Dual 15\" Platinum Ported Enclosure pairs a large 100.8-square-inch port with rigid Baltic Birch construction for deep bass in a high-power setup.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum 15-inch design:\u003c\/strong\u003e The enclosure is purpose-built for the Platinum 15-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 Hz tuning:\u003c\/strong\u003e The ported design is tuned for low-frequency bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge port area:\u003c\/strong\u003e The 100.8-square-inch port helps reduce air velocity at high power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 17-ply Russian Baltic Birch, a center brace, and internal Titebond III bonding help limit panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify subwoofer connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e Zero exterior screw holes and a carbon gray finish create a tidy, finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eDual 15\" Platinum Ported Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume\u003c\/td\u003e\n\u003ctd\u003e7.0 cubic feet @ 32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e100.8 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e18.0\" x 5.6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e13.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1\" Russian Baltic Birch (17-ply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003e1\" front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e1\" center brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eHigh power systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e39.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e24.9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eReady-to-install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior\u003c\/td\u003e\n\u003ctd\u003eZero exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal bonding\u003c\/td\u003e\n\u003ctd\u003eTitebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure combines substantial internal volume and a broad port with braced, 17-ply Birch construction. Those design details support a high-output Platinum 15-inch setup while helping control panel movement. Its stain and polyurethane topcoat give the enclosure a finished look, while the screw-free exterior keeps the outside clean.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eMeasure the available trunk or cargo area against the enclosure’s 20.0\" height, 39.75\" width, and 24.9\" depth. Confirm that your Platinum 15-inch subwoofer’s mounting requirements match the 13.7\" cutout. The enclosure is pre-wired; connect your subwoofers at the metal binding post.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is purpose-built for the Resilient Sounds Platinum 15-inch subwoofer. Check mounting and system requirements if considering a different subwoofer.\u003c\/p\u003e \u003ch3\u003eWhat does the 32 Hz tuning mean?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure’s port is tuned to 32 Hz, a key design detail that shapes its low-frequency response.\u003c\/p\u003e \u003ch3\u003eHow much space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003ePlan for its external dimensions: 20.0\" high, 39.75\" wide, and 24.9\" deep. Allow for the space needed to position and connect it.\u003c\/p\u003e \u003ch3\u003eWhat power can the enclosure handle?\u003c\/h3\u003e\n\u003cp\u003eIt is described for high-power systems, but no wattage figure is stated. Confirm the requirements of your subwoofers and amplifier before purchase.\u003c\/p\u003e \u003ch3\u003eWhat does ready-to-install mean here?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure comes pre-wired with 10ga OFC wiring and a metal binding post. Connect your subwoofers to prepare the enclosure for use.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229588196,"sku":"BHSP-RES-PT-D15-HD","price":1124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_3fa49793-5bb1-4969-a660-f60987024200.png?v=1789261144"},{"product_id":"resilient-sounds-dual-12-platinum-ported-enclosure","title":"Resilient Sounds Dual 12\" Platinum Ported Enclosure","description":"\u003cp\u003eThis Basshead Supply ported enclosure is built specifically for a pair of Resilient Sounds Platinum 12-inch subwoofers. Its birch construction, reinforced baffle and pre-wired terminals provide a model-matched foundation for a custom bass system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel: BHSP-RES-PT-D12-HD.\u003c\/li\u003e\n\u003cli\u003eNet internal volume: 4.5 cubic feet; tuning: 32 Hz.\u003c\/li\u003e\n\u003cli\u003ePort area: 65 square inches; port opening: 16 × 4.0625 inches.\u003c\/li\u003e\n\u003cli\u003eSubwoofer cutout diameter: 11.2 inches.\u003c\/li\u003e\n\u003cli\u003e1-inch (24 mm), 17-ply birch construction with a center baffle brace.\u003c\/li\u003e\n\u003cli\u003eGrey-stained finish and metal binding posts pre-wired with 10-gauge OFC wire.\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (H × W × D): 18 × 35.125 × 21.875 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck your exact Platinum subwoofer version and available cargo-space opening before ordering. This listing is for the enclosure, not a loaded subwoofer system.\u003c\/p\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850229653732,"sku":"BHSP-RES-PT-D12-HD","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_8375fbba-7bac-495e-9af0-97a96a286161.png?v=1789261146"},{"product_id":"resilient-sounds-single-15-gold-v2-ported-enclosure","title":"Resilient Sounds Single 15\" Gold v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your Gold v2 15\" subwoofer a purpose-built home with the Resilient Sounds Single 15\" Gold v2 Ported Enclosure. Its 3.5 cubic feet of net volume and 32 Hz tuning are designed for deep, controlled bass, while the rigid birch construction helps keep the enclosure steady during playback.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray finish and concealed screw holes give this ported subwoofer enclosure a clean look for a trunk or behind-seats installation.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built design:\u003c\/strong\u003e Made for the Gold v2 15\" subwoofer, with a 14.236\" cutout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted bass tuning:\u003c\/strong\u003e A 32 Hz tuning and 50.38 sq in port area support deep bass with controlled airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 3\/4\" (18mm), 13-ply Russian Baltic Birch and a solid 1\" (24mm) baffle help limit panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible screw holes create a polished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify connection to your subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to order:\u003c\/strong\u003e Handcrafted in the USA and fully glued with Titebond III for airtight joints.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Single 15\" Gold v2 Ported Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eGold v2 15\" sub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e3.5 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e50.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e15.502\" x 3.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e14.236\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003eSolid 1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 17.0\", Width 29.875\", Depth 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction details\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III; zero visible screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacture\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePreparation\u003c\/th\u003e\n\u003ctd\u003eReady to install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure combines the specified airspace and port tuning for the Gold v2 15\" with construction details aimed at a rigid, airtight build. The 50.38 sq in port area is intended to help move air smoothly at the tuned frequency, while the thick baffle and birch walls help limit flex.\u003c\/p\u003e\n\u003cp\u003eIts finished exterior suits an installation where appearance matters as much as a dedicated subwoofer enclosure. The enclosure is rated for up to 1750W RMS.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck that the 17.0\" height, 29.875\" width, and 20.0\" depth fit your intended trunk or cargo area. Confirm the subwoofer is a Gold v2 15\" and matches the 14.236\" cutout before purchase.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is pre-wired with 10ga OFC and a metal binding post. Review your system’s power requirements and installation plan before connecting equipment. This product is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed specifically for the Gold v2 15\" subwoofer and has a 14.236\" cutout.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 32 Hz tuning mean for bass?\u003c\/h3\u003e\n\u003cp\u003eThe stated tuning favors deeper bass while maintaining controllable transient performance for daily driving.\u003c\/p\u003e\n\u003ch3\u003eHow much space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003ePlan around its full dimensions: 17.0\" high, 29.875\" wide, and 20.0\" deep. Check the available space at the intended mounting location.\u003c\/p\u003e\n\u003ch3\u003eWhat wiring is on the enclosure?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build lead time?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet for your car audio setup. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230079716,"sku":"BHSP-RES-GV2-S15-RD","price":674.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_f9c66762-1033-49e4-894b-9132cda4609f.png?v=1789261147"},{"product_id":"resilient-sounds-single-12-gold-v2-ported-enclosure","title":"Resilient Sounds Single 12\" Gold v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your Resilient Sounds Gold v2 12\" subwoofer a ported enclosure built around its intended airspace and tuning. The Resilient Sounds Single 12\" Gold v2 Ported Enclosure combines a 2.0 cubic-foot net volume with a 33 Hz tune for deep bass and a controlled response.\u003c\/p\u003e\n\u003cp\u003eIts carbon gray finish and screw-free exterior create a clean look in your vehicle, while pre-wiring makes the enclosure ready for subwoofer mounting and wiring.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold v2-specific design:\u003c\/strong\u003e The enclosure’s airspace and 11.175\" cutout are designed for the Gold v2 12\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 Hz tuning:\u003c\/strong\u003e The low-frequency tune targets deep bass while supporting controlled cone movement at common listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28.69 sq in port area:\u003c\/strong\u003e The slot port’s cross-section helps sustain airflow at high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e A 13-ply Russian Baltic Birch cabinet and solid 1\" front baffle help limit panel flex and resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connections:\u003c\/strong\u003e Pre-wired 10ga OFC and a metal binding post simplify the wiring stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e The carbon gray stain, polyurethane topcoat, and zero visible screw holes give the enclosure a polished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSingle 12\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Gold v2 12\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e2.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e28.69 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e13.501\" x 2.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply cabinet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003eSolid 1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower handling\u003c\/th\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 15.0\", Width 24.625\", Depth 17.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExterior\u003c\/th\u003e\n\u003ctd\u003eZero visible screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation preparation\u003c\/th\u003e\n\u003ctd\u003eReady to install; prepared for mounting and wiring of the subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order. Ships in 2-3 weeks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure brings the Gold v2 12\" subwoofer’s specified airspace and tuning together in one purpose-built cabinet. Its 2.0 cubic-foot net volume and 33 Hz tune are intended to support deep bass with a controlled response, rather than leaving enclosure design as a separate project.\u003c\/p\u003e\n\u003cp\u003eThe Baltic Birch construction, thick front baffle, and fully glued assembly are practical choices for a bass enclosure. The finished, screw-free exterior also keeps the visible cabinet looking tidy in a vehicle.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003ePlan for the enclosure’s 15.0\" height, 24.625\" width, and 17.0\" depth when checking trunk or cargo-area space. Confirm the 11.175\" cutout suits your Gold v2 12\" subwoofer and that the enclosure can be positioned for your installation.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is pre-wired with 10ga OFC and a metal binding post. Its power handling is up to 1750W RMS; match the subwoofer and supporting equipment to their respective ratings.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is purpose-built for a single Resilient Sounds Gold v2 12\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 33 Hz tuning mean for my setup?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is tuned to 33 Hz, targeting deep bass with a controlled response.\u003c\/p\u003e\n\u003ch3\u003eHow much room should I allow?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure measures 15.0\" high, 24.625\" wide, and 17.0\" deep. Check these dimensions against your available space.\u003c\/p\u003e\n\u003ch3\u003eWhat is the enclosure’s power handling?\u003c\/h3\u003e\n\u003cp\u003eIt is rated for up to 1750W RMS. Match your equipment to its own ratings as well.\u003c\/p\u003e\n\u003ch3\u003eIs the enclosure prepared for installation?\u003c\/h3\u003e\n\u003cp\u003eYes. It is described as ready to install and prepared for mounting and wiring the subwoofer, with pre-wired 10ga OFC and a metal binding post.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230178020,"sku":"BHSP-RES-GV2-S12-RD","price":510.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_1159743f-1347-4c88-b36e-9fd5df1917d3.png?v=1789261148"},{"product_id":"resilient-sounds-single-10-gold-v2-ported-enclosure","title":"Resilient Sounds Single 10\" Gold v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGet a dedicated ported enclosure for the Resilient Sounds Gold v2 10-inch subwoofer, with a 1.25 cubic-foot net volume and 34 Hz tuning. Its port dimensions and internal airspace are designed specifically for this sub, supporting deep bass while retaining transient response.\u003c\/p\u003e\n\u003cp\u003eHand-built in the USA from Russian Baltic Birch, the enclosure pairs a rigid cabinet with a solid front baffle. A carbon gray stain and polyurethane topcoat give it a finished look for your vehicle’s audio setup.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGold v2-specific design:\u003c\/b\u003e The enclosure’s volume and tuning are tailored to the Resilient Sounds Gold v2 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e34 Hz tuning:\u003c\/b\u003e The low tuning is intended to emphasize bass extension in a typical vehicle cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid construction:\u003c\/b\u003e 3\/4-inch, 13-ply Russian Baltic Birch walls and a 1-inch, 17-ply baffle help limit panel flex and resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePre-wired connection:\u003c\/b\u003e 10-gauge OFC wiring and a metal binding post simplify connecting the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClean exterior:\u003c\/b\u003e No visible exterior screw holes and a polyurethane topcoat create a neat, finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eSingle 10\" Gold v2 ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume\u003c\/td\u003e\n\u003ctd\u003e1.25 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e34 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e18.05 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e11.497\" x 1.57\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e9.438\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCabinet construction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18 mm) Russian Baltic Birch; 13-ply walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront baffle\u003c\/td\u003e\n\u003ctd\u003eSolid 1\" (24 mm); 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 13.0\", Width 20.375\", Depth 16.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction details\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA; Titebond III glue; zero exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure brings together a sub-specific airspace, 34 Hz tuning, and an 18.05-square-inch port for a dedicated Gold v2 10-inch setup. The ported design emphasizes low-frequency extension, while the rigid birch cabinet and thick baffle help control panel movement.\u003c\/p\u003e\n\u003cp\u003eIts compact, floor-friendly dimensions and pre-wired binding post make it easier to plan the enclosure’s placement and connection within your audio system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is designed for the Resilient Sounds Gold v2 10-inch subwoofer. Check the 9.438-inch cutout and the enclosure’s 13.0\" x 20.375\" x 16.0\" dimensions against your driver and available vehicle space before purchase.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is rated up to 1750W RMS when paired with the Gold v2 10-inch subwoofer and a matching amplifier. Confirm that your system components are appropriate for your intended setup.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed specifically for the Resilient Sounds Gold v2 10-inch subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has a net volume of 1.25 cubic feet and is tuned to 34 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat is the cutout diameter?\u003c\/h3\u003e\n\u003cp\u003eThe listed cutout is 9.438\". Check it against your subwoofer’s mounting requirements.\u003c\/p\u003e\n\u003ch3\u003eWhat power rating does the enclosure support?\u003c\/h3\u003e\n\u003cp\u003eIts rating is up to 1750W RMS when paired with the Gold v2 10-inch subwoofer and a matching amplifier.\u003c\/p\u003e\n\u003ch3\u003eHow does the enclosure connect?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC wiring and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow long is the build lead time?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built to order and ships in 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop this Resilient Sounds enclosure at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230636772,"sku":"BHSP-RES-GV2-S10-RD","price":420.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_6f9c5bbf-e3c3-476a-b8ab-f69f24eb05bc.png?v=1789261150"},{"product_id":"resilient-sounds-dual-15-gold-v2-ported-enclosure","title":"Resilient Sounds Dual 15\" Gold v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a dedicated bass setup around the Resilient Sounds Dual 15\" Gold v2 Ported Enclosure. This hand-assembled, ported subwoofer enclosure is designed for the Resilient Sounds Gold v2 15\" subwoofer, with 7.0 cubic feet of net volume and 32 Hz tuning.\u003c\/p\u003e\n\u003cp\u003eIts substantial footprint and 3500W RMS power rating suit high-power bass installations where there is room for a large enclosure. The carbon gray finish and zero-visible-screw exterior give the box a clean look in a trunk or cargo area.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold v2 pairing:\u003c\/strong\u003e Designed specifically for the Resilient Sounds Gold v2 15\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted bass design:\u003c\/strong\u003e The 7.0 cubic foot chamber and 32 Hz tuning support deep, controlled low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e Russian Baltic Birch panels, a solid front baffle, and a center brace help limit panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain, a polyurethane topcoat, and no visible screws create a refined presentation.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eDual 15\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Gold v2 15\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e7.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e99.94 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e19.5\" x 5.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e14.236\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCabinet construction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch, 13-ply throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBaffle\u003c\/th\u003e\n\u003ctd\u003eSolid 1\" (24mm) front baffle, 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracing\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) center brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eUp to 3500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 21.0\", Width 40.0\", Depth 22.375\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction details\u003c\/th\u003e\n\u003ctd\u003eHand-assembled in the USA; Titebond III glue; zero-visible-screw exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure brings together a specified chamber volume, port area, and tuning for a purpose-built match with the Gold v2 15\" subwoofer. The center brace and thick front baffle add rigidity, while Titebond III glue supports airtight construction.\u003c\/p\u003e\n\u003cp\u003ePre-wired connections reduce setup steps, and the 3500W RMS rating makes the enclosure a fitting choice for a high-power Gold v2 installation. Its carbon gray finish keeps the cabinet looking considered in a visible trunk or cargo-area setup.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the available vehicle space against the enclosure’s 21.0\" height, 40.0\" width, and 22.375\" depth before ordering. Confirm that the 14.236\" cutout suits your intended subwoofer and that your system is appropriate for the enclosure’s power rating.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is designed for the Resilient Sounds Gold v2 15\" subwoofer. It is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed to pair with the Resilient Sounds Gold v2 15\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has 7.0 cubic feet of net volume and is tuned to 32 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003ePlan for a footprint measuring 21.0\" high, 40.0\" wide, and 22.375\" deep.\u003c\/p\u003e\n\u003ch3\u003eWhat wiring does the enclosure include?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow long is the stated lead time?\u003c\/h3\u003e\n\u003cp\u003eThis enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexplore the Resilient Sounds brand profile\u003c\/a\u003e to learn more about the brand.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230669540,"sku":"BHSP-RES-GV2-D15-RD","price":1012.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_9b9bf6a8-6af4-4c5e-8c65-b798bdbe15f3.png?v=1789261151"},{"product_id":"resilient-sounds-dual-12-gold-v2-ported-enclosure","title":"Resilient Sounds Dual 12\" Gold v2 Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a dual-subwoofer setup around deep, controlled bass with the Resilient Sounds Dual 12\" Gold v2 Ported Enclosure. Designed for two Resilient Sounds Gold v2 12\" subs, this 4.0 cubic-foot enclosure is tuned to 33 Hz and handcrafted in the USA.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 Hz tuning:\u003c\/strong\u003e Targets strong sub-bass extension while maintaining control at high output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 13-ply Russian Baltic Birch walls and a 17-ply front baffle help reduce panel flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraced design:\u003c\/strong\u003e A center baffle brace helps maintain enclosure integrity during high-output signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify the subwoofer connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain with a polyurethane topcoat gives the enclosure a show-quality finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean assembly:\u003c\/strong\u003e Fully glued with Titebond III and no visible exterior screw holes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned for\u003c\/td\u003e\n\u003ctd\u003eTwo Resilient Sounds Gold v2 12\" subs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Size\u003c\/td\u003e\n\u003ctd\u003e13.501\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e11.175\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaffle\u003c\/td\u003e\n\u003ctd\u003eSolid 1\" (24mm) front baffle; 17-ply construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 3500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 15.0\", Width 33.25\", Depth 23.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction details\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA; fully glued with Titebond III; zero visible exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder details\u003c\/td\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a defined internal volume and port design with construction details made for rigidity. The Baltic Birch walls, solid front baffle, and center brace are intended to help limit panel flex as the system plays at high output.\u003c\/p\u003e\n\u003cp\u003eIts carbon gray finish and clean exterior keep the enclosure’s appearance considered, while the pre-wired connection gives you a clear starting point for integrating the two subwoofers.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm that your vehicle’s cargo area can accommodate the external dimensions: 15.0\" high, 33.25\" wide, and 23.0\" deep. The enclosure is designed for two Resilient Sounds Gold v2 12\" subs and has an 11.175\" cutout.\u003c\/p\u003e\n\u003cp\u003eConnect the subwoofers to the pre-wired 10ga OFC wiring and metal binding post. The enclosure is rated up to 3500W RMS. Built-to-order units ship in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofers is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for two Resilient Sounds Gold v2 12\" subs.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 33 Hz tuning indicate?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is tuned to 33 Hz to target strong sub-bass extension while maintaining control at high output levels.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s external dimensions?\u003c\/h3\u003e\n\u003cp\u003eIt measures 15.0\" high, 33.25\" wide, and 23.0\" deep. Compare these measurements with the available space in your vehicle.\u003c\/p\u003e\n\u003ch3\u003eHow does the enclosure connect to the subwoofers?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC wiring and a metal binding post. Wire the subwoofers to the enclosure’s wiring.\u003c\/p\u003e\n\u003ch3\u003eWhat is the power rating?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is rated up to 3500W RMS.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230702308,"sku":"BHSP-RES-GV2-D12-RD","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_98273d6d-3e0c-45c4-b823-be28d2404530.png?v=1789261152"},{"product_id":"resilient-sounds-dual-10-gold-v2-ported-enclosure","title":"Resilient Sounds Dual 10\" Gold v2 Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Resilient Sounds Gold v2 10\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e34.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e35.9375 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e11.5\" x 3.125\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e9.4375\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e13.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e29.625\" wide\u003c\/li\u003e\r\n\u003cli\u003e20.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThis is a custom made box specifically for a Resilient Sounds Gold v2 10\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230931684,"sku":"BHSP-RES-GV2-D10-RD","price":570.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_27e87d1f-6b87-40d7-8a2a-b6d1b225e4b3.png?v=1789261153"},{"product_id":"resilient-sounds-single-8-gold-ported-enclosure","title":"Resilient Sounds Single 8\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your Resilient Sounds Gold 8\" subwoofer a purpose-built ported enclosure designed for deep bass in a compact trunk or hatch-area setup. This handcrafted single 8\" enclosure provides 1.0 cubic foot of net volume and is tuned to 35 Hz.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold 8\" subwoofer design:\u003c\/strong\u003e The enclosure is made for a single Resilient Sounds Gold 8\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted layout:\u003c\/strong\u003e A 14.62 sq in port area and specified port dimensions shape the enclosure’s 35 Hz tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBirch construction:\u003c\/strong\u003e 3\/4\" (18mm), 13-ply Russian Baltic Birch provides a rigid enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-connect wiring:\u003c\/strong\u003e Pre-wired 10ga OFC wiring and a metal binding post simplify connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain with a polyurethane topcoat gives the enclosure a finished look.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSubwoofer configuration\u003c\/th\u003e\n\u003ctd\u003eSingle 8\" Resilient Sounds Gold 8\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e1.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e35 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e14.62 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e8.997\" x 1.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e7.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply birch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower handling\u003c\/th\u003e\n\u003ctd\u003eUp to 1000W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 10.5\", Width 23.0\", Depth 14.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III; zero visible screws on the exterior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacture\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild and shipping timing\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs a defined internal volume and port tuning with a compact single-subwoofer format. Its glued construction and birch panels support a rigid, airtight build, while the clean exterior keeps visible fasteners out of sight.\u003c\/p\u003e\n\u003cp\u003eThe enclosure arrives wired and prepared for installation. Its stated power handling is up to 1000W RMS; match your subwoofer and system to the enclosure’s specifications.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the 10.5\" height, 23.0\" width, and 14.5\" depth against your available cargo space. The subwoofer mounting cutout is 7.3\". Confirm that your driver matches this cutout and is the Resilient Sounds Gold 8\" model this enclosure is designed for.\u003c\/p\u003e\n\u003cp\u003eThis enclosure is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for one Resilient Sounds Gold 8\" subwoofer. Check your driver’s mounting requirements before ordering.\u003c\/p\u003e \u003ch3\u003eWhat should I check before choosing a location?\u003c\/h3\u003e\n\u003cp\u003eMeasure the available space and compare it with the enclosure’s listed dimensions. Also confirm that the 7.3\" cutout suits your subwoofer.\u003c\/p\u003e \u003ch3\u003eWhat does the power-handling rating mean?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is rated for up to 1000W RMS. Check that your subwoofer and system are appropriate for this rating.\u003c\/p\u003e \u003ch3\u003eDoes it arrive wired?\u003c\/h3\u003e\n\u003cp\u003eYes. It arrives prepared for installation with pre-wired 10ga OFC and a metal binding post.\u003c\/p\u003e \u003ch3\u003eHow long is the build and shipping lead time?\u003c\/h3\u003e\n\u003cp\u003eIt is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230964452,"sku":"BHSP-RES-G-S8-SD","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_93022a1f-983c-4586-80fa-522c8755bbc5.png?v=1789261155"},{"product_id":"resilient-sounds-single-15-gold-ported-enclosure","title":"Resilient Sounds Single 15\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a single-subwoofer setup around the Resilient Sounds Single 15\" Gold Ported Enclosure, designed for the Resilient Sounds Gold 15\" subwoofer. Its ported design and 32 Hz tuning target deep, controlled bass, while a thick front baffle and Baltic birch construction provide a rigid cabinet.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted design:\u003c\/strong\u003e The specified tuning and port area support airflow for low-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e Multi-ply Baltic birch sides and a thick front baffle help reduce cabinet flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connections:\u003c\/strong\u003e 10ga OFC wiring and metal binding posts simplify amplifier connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e A carbon gray stain, polyurethane topcoat, and no visible exterior screw holes create a refined finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed assembly:\u003c\/strong\u003e Titebond III glue and fully glued construction support airtight integrity.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e3.25 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e46.5 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e15.5\" x 3.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSubwoofer cutout\u003c\/th\u003e\n\u003ctd\u003e13.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide construction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm) thick; 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 17.0\", Width 27.875\", Depth 20.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eFully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild and appearance\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA; zero visible exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is built around the Resilient Sounds Gold 15\" subwoofer, with specified airspace and port dimensions for that setup. Its thick front baffle and glued construction are intended to limit cabinet flex and preserve airtight integrity during high-power use. The finished exterior also suits an installation where the enclosure remains visible.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse with a Resilient Sounds Gold 15\" subwoofer. Before planning a trunk or hatch installation, compare the enclosure’s height, width, and depth with your available space. Confirm that your amplifier and system are appropriate for the enclosure’s stated power rating.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered for the Resilient Sounds Gold 15\" subwoofer.\u003c\/p\u003e \u003ch3\u003eWhat does the 32 Hz tuning indicate?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is tuned to 32 Hz, targeting deep bass frequencies.\u003c\/p\u003e \u003ch3\u003eWhat is the enclosure’s power rating?\u003c\/h3\u003e\n\u003cp\u003eIts stated rating is up to 1750W RMS.\u003c\/p\u003e \u003ch3\u003eHow do I check whether it will fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompare the listed height, width, and depth with your available installation space.\u003c\/p\u003e \u003ch3\u003eHow are the amplifier connections made?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure has pre-wired 10ga OFC wiring and metal binding posts.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop this enclosure at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850230997220,"sku":"BHSP-RES-G-S15-RD","price":652.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_3ae1af1d-4389-40d8-87d1-60bc0b0ba512.png?v=1789261156"},{"product_id":"resilient-sounds-single-12-gold-ported-enclosure","title":"Resilient Sounds Single 12\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your Resilient Sounds Gold 12\" subwoofer its specified airspace with this single 12\" ported enclosure. Its 2.0 cubic-foot net volume and 33 Hz tuning are designed for deep bass, while the carbon gray finish gives the enclosure a clean, show-ready look.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold 12\" fit:\u003c\/strong\u003e The 11.2\" cutout is specified for the Resilient Sounds Gold 12\" subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted design:\u003c\/strong\u003e A 33 Hz tuning and 28.69 sq in port area support the enclosure’s intended deep-bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 13-ply Russian Baltic Birch and a 17-ply front baffle provide substantial panel stiffness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify the connection process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e The carbon gray stain, polyurethane topcoat, and lack of visible exterior screws create a refined appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-power rating:\u003c\/strong\u003e Rated up to 1750W RMS for use in a performance-focused system within the subwoofer’s capability.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSingle 12\" ported enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecified subwoofer\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds Gold 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume\u003c\/td\u003e\n\u003ctd\u003e2.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e28.69 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e13.501\" x 2.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubwoofer cutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure construction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch, 13-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront baffle\u003c\/td\u003e\n\u003ctd\u003e1\" (24mm), 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 15.0\", Width 24.625\", Depth 17.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction details\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA; zero visible exterior screws; fully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild and lead time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure combines the specified volume and tuning for the Gold 12\" with a rectangular port sized at 28.69 sq in. The design is intended to support deep bass while keeping output controlled, and the substantial port area helps move air efficiently at high power.\u003c\/p\u003e\n\u003cp\u003eIts birch construction, fully glued joints, and reinforced front baffle make enclosure rigidity part of the design. Pre-wiring and a metal binding post also give you a clear connection point for your system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is engineered for the Resilient Sounds Gold 12\" subwoofer and has an 11.2\" cutout. Before installation, compare the enclosure’s 15.0\" height, 24.625\" width, and 17.0\" depth with your available space.\u003c\/p\u003e\n\u003cp\u003eMatch the amplifier and system setup to the subwoofer’s capabilities and the enclosure’s rating of up to 1750W RMS. The enclosure is built to order, with a stated lead time of 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Gold 12\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has a 2.0 cubic-foot net volume and is tuned to 33 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s outside dimensions?\u003c\/h3\u003e\n\u003cp\u003eIt measures 15.0\" high, 24.625\" wide, and 17.0\" deep. Check these measurements against your available installation space.\u003c\/p\u003e\n\u003ch3\u003eHow is the enclosure connected?\u003c\/h3\u003e\n\u003cp\u003eIt comes pre-wired with 10ga OFC wiring and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eWhat is its power rating?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is rated up to 1750W RMS. Match your system to the Gold 12\" subwoofer’s capabilities.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231029988,"sku":"BHSP-RES-G-S12-RD","price":510.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01_3e58e0e1-2753-4b7b-b78b-080640ba8008.png?v=1789261157"},{"product_id":"resilient-sounds-single-10-gold-ported-enclosure","title":"Resilient Sounds Single 10\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive a Resilient Sounds Gold 10\" subwoofer a purpose-built home with this single 10\" ported enclosure. Its 1.25 cu ft volume and 34 Hz tuning are designed to support deep bass in a compact enclosure.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted design:\u003c\/strong\u003e An 18.05 sq in port area supports airflow at higher output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e 3\/4\" Russian Baltic Birch walls and a thick front baffle help limit enclosure flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-connect wiring:\u003c\/strong\u003e Pre-wired 10ga OFC and a metal binding post simplify the subwoofer connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain and a polyurethane topcoat give the enclosure a clean appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandcrafted details:\u003c\/strong\u003e Fully glued construction with Titebond III and no visible exterior screws creates a clean finish.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e1.25 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e34 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e18.05 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e11.497\" x 1.57\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e9.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch, 13 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\" (24mm), 17 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower handling\u003c\/th\u003e\n\u003ctd\u003eUp to 1750W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 13.0\", Width 20.5\", Depth 16.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCraftsmanship\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA; zero visible exterior screws; fully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is engineered specifically for the Resilient Sounds Gold 10\" subwoofer. Its defined volume, tuning, and port dimensions make it a focused option for a Gold 10\" car audio build.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray finish and screw-free exterior suit installations where the enclosure remains visible, while the compact dimensions help you plan its placement in your vehicle.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the enclosure dimensions and 9.3\" cutout against your available space and subwoofer before purchase. The enclosure is designed for the Resilient Sounds Gold 10\" subwoofer.\u003c\/p\u003e\n\u003cp\u003eBuilt-to-order production has a stated shipping timeline of 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is engineered specifically for the Resilient Sounds Gold 10\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat are the enclosure’s tuning and net volume?\u003c\/h3\u003e\n\u003cp\u003eIt has a net volume of 1.25 cubic feet and is tuned to 34 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for installation?\u003c\/h3\u003e\n\u003cp\u003ePlan for a height of 13.0\", width of 20.5\", and depth of 16.0\". Check these measurements against your vehicle’s available space.\u003c\/p\u003e\n\u003ch3\u003eWhat does the enclosure include for wiring?\u003c\/h3\u003e\n\u003cp\u003eIt is pre-wired with 10ga OFC and has a metal binding post. Confirm your subwoofer’s connection requirements before installation.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexplore the Resilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231062756,"sku":"BHSP-RES-G-S10-RD","price":420.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-S12-HD-01.png?v=1789261158"},{"product_id":"resilient-sounds-dual-8-gold-ported-enclosure","title":"Resilient Sounds Dual 8\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring deep, controlled bass to your vehicle with the Resilient Sounds Dual 8\" Gold Ported Enclosure. It is built for the Resilient Sounds Gold 8\" subwoofer, with a 2.0 cubic foot chamber tuned to 34 Hz.\u003c\/p\u003e\n\u003cp\u003eThe 3\/4\" Russian Baltic Birch construction, internal brace, and clean exterior give your bass system a rigid foundation and a refined look in a trunk or cargo area.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e34 Hz tuning:\u003c\/strong\u003e Supports deep bass extension with a controlled response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28.75 sq in port area:\u003c\/strong\u003e Provides substantial airflow through the port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-ply Baltic Birch:\u003c\/strong\u003e Rigid panels help limit enclosure flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e Hand-built construction has no visible exterior screw holes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eDual 8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesigned for\u003c\/th\u003e\n\u003ctd\u003eResilient Sounds Gold 8\" subwoofer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e2.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e34 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e28.75 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e12.5\" x 2.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e7.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch - 13 ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter baffle brace\u003c\/th\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eUp to 2000W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 14.0\", Width 27.0\", Depth 17.063\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eHandcrafted in the USA; fully glued with Titebond III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eBuilt to order. Ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure combines a defined 34 Hz tuning with a 2.0 cubic foot chamber for a bass setup centered on the Gold 8\" subwoofer. Its 3\/4\" panels and center brace add rigidity, while fully glued Titebond III joints support airtight construction.\u003c\/p\u003e\n\u003cp\u003eThe carbon gray stain and polyurethane topcoat give the enclosure a finished appearance. With no visible exterior screw holes, it keeps the installation looking clean when the enclosure is on display.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck that the 14.0\" height, 27.0\" width, and 17.063\" depth fit your available vehicle space. Confirm the 7.3\" cutout suits the subwoofer before installation.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is designed for the Resilient Sounds Gold 8\" subwoofer and is rated up to 2000W RMS. Allow for the stated 2-3 week build and shipping lead time.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich subwoofer is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for the Resilient Sounds Gold 8\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 34 Hz tuning mean?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is tuned to 34 Hz, a specification that helps describe its low-frequency response.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for the enclosure?\u003c\/h3\u003e\n\u003cp\u003eIts external dimensions are 14.0\" high, 27.0\" wide, and 17.063\" deep. Check your available space before purchase.\u003c\/p\u003e\n\u003ch3\u003eWhat is the enclosure’s power rating?\u003c\/h3\u003e\n\u003cp\u003eIt is rated for up to 2000W RMS.\u003c\/p\u003e\n\u003ch3\u003eHow does it connect?\u003c\/h3\u003e\n\u003cp\u003eIt has pre-wired 10ga OFC wiring and a metal binding post.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop 12 Volt Outlet for your vehicle audio needs. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231095524,"sku":"BHSP-RES-G-D8-SD","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_ee45ab7b-bc6e-4433-a72d-0e03b582d134.png?v=1789261160"},{"product_id":"resilient-sounds-dual-15-gold-ported-enclosure","title":"Resilient Sounds Dual 15\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a trunk-forward system around deep, controlled bass with the Resilient Sounds Dual 15\" Gold Ported Enclosure. This ported subwoofer enclosure is handcrafted from Russian Baltic Birch and tuned specifically for the Resilient Sounds Gold 15\" subwoofer.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-bass tuning:\u003c\/strong\u003e The 32 Hz tuning and port geometry are designed for low-frequency extension and controlled response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid construction:\u003c\/strong\u003e Baltic Birch panels and a center brace help limit panel flex during loud bass passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean exterior:\u003c\/strong\u003e A carbon gray finish, polyurethane topcoat, and no visible exterior screw holes create a polished look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connections:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify the enclosure connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to order:\u003c\/strong\u003e Each enclosure is handcrafted in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eDual 15\" Gold Ported Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet volume\u003c\/th\u003e\n\u003ctd\u003e6.5 cubic feet @ 32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTuning\u003c\/th\u003e\n\u003ctd\u003e32 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort area\u003c\/th\u003e\n\u003ctd\u003e93.66 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort size\u003c\/th\u003e\n\u003ctd\u003e18.501\" x 5.063\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutout\u003c\/th\u003e\n\u003ctd\u003e13.7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (18 mm) Russian Baltic Birch; 13-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront baffle\u003c\/th\u003e\n\u003ctd\u003e1\" (24 mm); 17-ply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracing\u003c\/th\u003e\n\u003ctd\u003e3\/4\" center brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiring\u003c\/th\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower rating\u003c\/th\u003e\n\u003ctd\u003eUp to 3500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eHeight 20.0\", Width 39.875\", Depth 22.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eTitebond III glue; airtight construction; zero visible exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduction and shipping\u003c\/th\u003e\n\u003ctd\u003eBuilt to order; ships in 2–3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure pairs substantial airspace with low tuning for high-power installations focused on bass extension. Its port dimensions are designed to balance low-end output with port stability and minimal chuffing at high power.\u003c\/p\u003e\n\u003cp\u003eThe braced Birch construction supports a rigid enclosure, while the finished exterior keeps the installation looking deliberate in a larger trunk or rear cavity.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThe enclosure is tuned specifically for the Resilient Sounds Gold 15\" subwoofer. Check your available installation space against its 20.0\" height, 39.875\" width, and 22.125\" depth before purchase. The stated cutout is 13.7\".\u003c\/p\u003e\n\u003cp\u003ePlan the amplifier and system around the enclosure’s rating of up to 3500W RMS. Confirm your complete system’s electrical and installation requirements before fitting it.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat subwoofer is this enclosure tuned for?\u003c\/h3\u003e\n\u003cp\u003eIt is tuned specifically for the Resilient Sounds Gold 15\" subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 32 Hz tuning mean for my system?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is designed to emphasize low-bass extension while maintaining a controlled response across musical content.\u003c\/p\u003e\n\u003ch3\u003eHow much amplifier power is it rated for?\u003c\/h3\u003e\n\u003cp\u003eThe stated power rating is up to 3500W RMS. Match amplifier output to the requirements of your complete system.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for installation?\u003c\/h3\u003e\n\u003cp\u003eAllow for dimensions of 20.0\" high, 39.875\" wide, and 22.125\" deep, and account for the 13.7\" cutout.\u003c\/p\u003e\n\u003ch3\u003eHow long does a built-to-order enclosure take to ship?\u003c\/h3\u003e\n\u003cp\u003eThe stated shipping time is 2–3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Resilient Sounds products at 12 Volt Outlet. Want to learn more about Resilient Sounds? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231128292,"sku":"BHSP-RES-G-D15-RD","price":967.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_cc6c1d98-a7a5-4e7d-8918-c4098dce7130.png?v=1789261161"},{"product_id":"resilient-sounds-dual-12-gold-ported-enclosure","title":"Resilient Sounds Dual 12\" Gold Ported Enclosure","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGet deep, controlled bass from a dual-subwoofer setup with the Resilient Sounds Dual 12\" Gold Ported Enclosure. Its 4.0 cubic feet of net airspace and 33 Hz tuning are designed for Resilient Sounds Gold 12\" subwoofers.\u003c\/p\u003e\n\u003cp\u003eA carbon gray stain and polyurethane topcoat give the cabinet a clean finish, while its braced Baltic Birch construction supports high-output use.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 Hz tuning:\u003c\/strong\u003e Aims the enclosure toward deep bass performance in automotive listening spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e57.38 sq in port area:\u003c\/strong\u003e The large port area is intended to help reduce compression and noise at high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid cabinet:\u003c\/strong\u003e 13-ply Russian Baltic Birch, a solid front baffle, and a center brace help limit cabinet flex and panel resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-wired connection:\u003c\/strong\u003e 10ga OFC wiring and a metal binding post simplify the subwoofer connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished exterior:\u003c\/strong\u003e Carbon gray stain, polyurethane topcoat, and no exterior screw holes create a clean appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade by hand in the USA:\u003c\/strong\u003e The enclosure is fully glued with Titebond III for airtight integrity.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned for\u003c\/td\u003e\n\u003ctd\u003eResilient Sounds Gold 12\" subwoofers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet volume\u003c\/td\u003e\n\u003ctd\u003e4.0 cubic feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTuning\u003c\/td\u003e\n\u003ctd\u003e33 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort area\u003c\/td\u003e\n\u003ctd\u003e57.38 sq in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort size\u003c\/td\u003e\n\u003ctd\u003e13.501\" x 4.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutout\u003c\/td\u003e\n\u003ctd\u003e11.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e3\/4\" (18mm) Russian Baltic Birch; 13-ply cabinet material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront baffle\u003c\/td\u003e\n\u003ctd\u003eSolid 1\" (24mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracing\u003c\/td\u003e\n\u003ctd\u003e3\/4\" center baffle brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eCarbon gray stain with polyurethane topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring\u003c\/td\u003e\n\u003ctd\u003ePre-wired 10ga OFC with metal binding post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower rating\u003c\/td\u003e\n\u003ctd\u003eUp to 3500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 15.0\", Width 33.25\", Depth 23.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction details\u003c\/td\u003e\n\u003ctd\u003eHandcrafted in the USA; fully glued with Titebond III; zero exterior screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eBuilt to order; ships in 2-3 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis enclosure brings together specified airspace, tuning, and port dimensions for a dual 12\" Gold subwoofer setup. Its 3\/4\" Russian Baltic Birch panels, solid 1\" front baffle, and 3\/4\" center brace address cabinet rigidity, while the port is sized for the stated 33 Hz tuning.\u003c\/p\u003e\n\u003cp\u003eThe clean exterior suits a build where finish matters alongside bass performance. Pre-wired connections also mean the enclosure arrives with 10ga OFC wiring and a metal binding post in place.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eDesigned for Resilient Sounds Gold 12\" subwoofers, the enclosure has an 11.2\" cutout. Confirm that your subwoofers match the cutout and enclosure requirements before installation.\u003c\/p\u003e\n\u003cp\u003eMeasure the available space against the enclosure’s 15.0\" height, 33.25\" width, and 23.0\" depth. It is built to order and ships in 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat subwoofers is this enclosure designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for Resilient Sounds Gold 12\" subwoofers.\u003c\/p\u003e\n\u003ch3\u003eWhat is the enclosure’s net volume and tuning?\u003c\/h3\u003e\n\u003cp\u003eIt has 4.0 cubic feet of net volume and is tuned to 33 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat is the subwoofer cutout size?\u003c\/h3\u003e\n\u003cp\u003eThe cutout is 11.2\". Check your subwoofer’s mounting requirements before purchasing.\u003c\/p\u003e\n\u003ch3\u003eWhat wiring is included?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is pre-wired with 10ga OFC wiring and a metal binding post.\u003c\/p\u003e\n\u003ch3\u003eHow much space should I allow?\u003c\/h3\u003e\n\u003cp\u003eThe enclosure measures 15.0\" high, 33.25\" wide, and 23.0\" deep. Compare these dimensions with your available installation space.\u003c\/p\u003e\n\u003ch3\u003eHow long does a built-to-order enclosure take to ship?\u003c\/h3\u003e\n\u003cp\u003eThe stated lead time is 2-3 weeks.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eExplore the \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/resilient-sounds\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eResilient Sounds brand profile\u003c\/a\u003e to learn more about the brand.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231161060,"sku":"BHSP-RES-G-D12-RD","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01_f498c970-1273-4c5a-bf47-f2f417df895e.png?v=1789261162"},{"product_id":"resilient-sounds-dual-10-gold-ported-enclosure","title":"Resilient Sounds Dual 10\" Gold Ported Enclosure","description":"\u003cp\u003eCustom built enclosure specifically for the Resilient Sounds Gold 10\" subwoofer.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2.5 cubic feet net enclosure\u003c\/li\u003e\r\n\u003cli\u003e34.0 hz tuning\u003c\/li\u003e\r\n\u003cli\u003e35.9375 sq inches of port\u003c\/li\u003e\r\n\u003cli\u003e11.5\" x 3.125\" port dimensions\u003c\/li\u003e\r\n\u003cli\u003e9.3\" subwoofer cut out\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) birch plywood construction\u003c\/li\u003e\r\n\u003cli\u003eSolid 1\" (24mm) baffle for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003e3\/4\" (18mm) center baffle brace\u003c\/li\u003e\r\n\u003cli\u003e13 ply birch veneer construction (1\" Baffle 17 ply)\u003c\/li\u003e\r\n\u003cli\u003eGray stained finish\u003c\/li\u003e\r\n\u003cli\u003ePre-wired metal binding post with 10ga OFC wire\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cstrong\u003eDimensions\/Weight:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e13.0\" tall\u003c\/li\u003e\r\n\u003cli\u003e29.75\" wide\u003c\/li\u003e\r\n\u003cli\u003e20.0\" deep\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThis is a custom made box specifically for a Resilient Sounds Gold 10\" subwoofer.\r\n\r\nAt Basshead Supply the goal with the \"performance series\" enclosures is to offer subwoofer specific enclosures that are well built, well performing and good looking enclosures at an affordable price. Using premium 3\/4\" Russian Baltic Birch we are able to achieve a very strong and light enclosure. Using our refined assembly process produces an enclosure with NO visible screw holes anywhere on the enclosure. The entire enclosure is glued together with Titebond III and coupled with our 1\" baffle and an additional 18mm baffle brace (on the dual subwoofer models) the enclosure is strong enough to handle subwoofer setups up to 2000W RMS (dual enclosures - 4000W RMS). Finished off with our carbon gray stain and a polyurethane finish these enclosures have a unique look to set it apart from all the generic prefabs. Complete with a recessed Satin Nickel Brass binding posts and prewired with OFC 10g wire, you are ready to go the moment it arrives. These are also built with love, by hand right here in the UNITED STATES OF AMERICA.","brand":"Basshead Supply","offers":[{"title":"Default Title","offer_id":49850231193828,"sku":"BHSP-RES-G-D10-RD","price":570.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/Adire-RS-PT-D12-HD-01.png?v=1789261164"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/Adire-RS-PT-D12-HD-01.png?v=1792692594","url":"https:\/\/www.12voltoutlet.com\/collections\/basshead-supply.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}