{"title":"Butt Connectors","description":"\u003ch2\u003eChoose an inline splice by wire size\u003c\/h2\u003e\n\u003cp\u003eButt connectors join wire ends in line, with a conductor entering each end of the connector. This Install Bay range uses nylon-insulated crimp splices for permanent wiring joints. Start with the conductor gauge, then choose the package quantity needed for the job or workbench.\u003c\/p\u003e\n\u003ch3\u003eCompare the available sizes and packs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26–24 AWG:\u003c\/strong\u003e RNBM miniature butt connectors have yellow nylon insulation and come in a 100-piece pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22–18 AWG:\u003c\/strong\u003e the red RNBC family offers 100, 500 and 1,000 connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16–14 AWG:\u003c\/strong\u003e the blue BNBC family offers the same three package quantities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12–10 AWG:\u003c\/strong\u003e the yellow YNBC family also comes in 100, 500 and 1,000-piece packs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the RNBC, BNBC and YNBC families, the base part number identifies the 100-pack, the -5 suffix identifies 500 pieces and -1 identifies 1,000. RNBM is a separate miniature size: its yellow sleeve does not make it interchangeable with the larger yellow YNBC connectors.\u003c\/p\u003e\n\u003ch3\u003eButt connector questions\u003c\/h3\u003e\n\u003ch4\u003eCan I disconnect and reconnect the splice?\u003c\/h4\u003e\n\u003cp\u003eA completed butt splice is a permanent crimped joint. If the wiring needs a separable connection, compare the mating interfaces in our Bullet Connectors or Quick Disconnects collections instead.\u003c\/p\u003e\n\u003ch4\u003eDoes nylon insulation seal out water?\u003c\/h4\u003e\n\u003cp\u003eThese listings do not specify a waterproof or adhesive-lined heat-shrink seal. Choose environmental protection separately to suit the installation.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before crimping?\u003c\/h4\u003e\n\u003cp\u003eVerify the gauge at both ends, select a tool suitable for that connector and inspect the finished crimp with power disconnected. A larger package changes quantity, not the connector's stated wire range.\u003c\/p\u003e","products":[{"product_id":"install-bay-rnbm","title":"Install Bay RNBM Yellow 26–24 AWG Nylon Butt Connectors – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 26–24 AWG conductors with the Install Bay RNBM nylon butt connectors. This 100-piece package supplies yellow insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 100-piece bag keeps this specific wire size together for consistent selection at the workbench.\u003c\/p\u003e\u003cp\u003eThis miniature connector is specified for 26–24 AWG wire. Its yellow insulation must not be confused with the larger 12–10 AWG yellow butt connectors in the Install Bay range; select by the marked gauge and part number, not color alone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e26–24 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eYellow nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e100 individual butt connectors per package, not 100 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRNBM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e26–24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 26–24 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis RNBM listing is one package of 100 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 26–24 AWG range and the RNBM part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808103530724,"sku":"RNBM","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rnbm.jpg?v=1792776262"},{"product_id":"install-bay-rnbc","title":"Install Bay RNBC Red 22–18 AWG Nylon Butt Connectors – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 22–18 AWG conductors with the Install Bay RNBC nylon butt connectors. This 100-piece package supplies red insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 100-piece bag keeps this specific wire size together for consistent selection at the workbench.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e22–18 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eRed nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e100 individual butt connectors per package, not 100 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRNBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22–18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 22–18 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis RNBC listing is one package of 100 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 22–18 AWG range and the RNBC part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808112312548,"sku":"RNBC","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rnbc.jpg?v=1792776403"},{"product_id":"install-bay-rnbc-1","title":"Install Bay RNBC-1 Red 22–18 AWG Nylon Butt Connectors – 1,000 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 22–18 AWG conductors with the Install Bay RNBC-1 nylon butt connectors. This 1,000-piece package supplies red insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 1,000-piece bag suits repeat installation work and restocking a frequently used connector size.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e22–18 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eRed nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e1,000 individual butt connectors per package, not 1,000 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRNBC-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22–18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1,000 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 22–18 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis RNBC-1 listing is one package of 1,000 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 22–18 AWG range and the RNBC-1 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808112738532,"sku":"RNBC-1","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rnbc-1.jpg?v=1792776403"},{"product_id":"install-bay-rnbc-5","title":"Install Bay RNBC-5 Red 22–18 AWG Nylon Butt Connectors – 500 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 22–18 AWG conductors with the Install Bay RNBC-5 nylon butt connectors. This 500-piece package supplies red insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 500-piece bag offers a larger replenishment quantity without changing the specified wire range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e22–18 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eRed nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e500 individual butt connectors per package, not 500 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRNBC-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22–18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e500 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 22–18 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis RNBC-5 listing is one package of 500 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 22–18 AWG range and the RNBC-5 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808112836836,"sku":"RNBC-5","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rnbc-5.jpg?v=1792776403"},{"product_id":"install-bay-bnbc","title":"Install Bay BNBC Blue 16–14 AWG Nylon Butt Connectors – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 16–14 AWG conductors with the Install Bay BNBC nylon butt connectors. This 100-piece package supplies blue insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 100-piece bag keeps this specific wire size together for consistent selection at the workbench.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eBlue nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e100 individual butt connectors per package, not 100 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBNBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 16–14 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis BNBC listing is one package of 100 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 16–14 AWG range and the BNBC part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 Warning\u003c\/h2\u003e\u003cp\u003eThis product can expose you to Antimony oxide (antimony trioxide) , which is known to the State of California to cause cancer, and Bisphenol a (BPA) , which is known to the State of California to cause birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e .\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113033444,"sku":"BNBC","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bnbc.jpg?v=1792776405"},{"product_id":"install-bay-bnbc-1","title":"Install Bay BNBC-1 Blue 16–14 AWG Nylon Butt Connectors – 1,000 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 16–14 AWG conductors with the Install Bay BNBC-1 nylon butt connectors. This 1,000-piece package supplies blue insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 1,000-piece bag suits repeat installation work and restocking a frequently used connector size.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eBlue nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e1,000 individual butt connectors per package, not 1,000 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBNBC-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1,000 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 16–14 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis BNBC-1 listing is one package of 1,000 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 16–14 AWG range and the BNBC-1 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 Warning\u003c\/h2\u003e\u003cp\u003eThis product can expose you to Antimony oxide (antimony trioxide) , which is known to the State of California to cause cancer, and Bisphenol a (BPA) , which is known to the State of California to cause birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e .\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113197284,"sku":"BNBC-1","price":121.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bnbc-1.jpg?v=1792776406"},{"product_id":"install-bay-bnbc-5","title":"Install Bay BNBC-5 Blue 16–14 AWG Nylon Butt Connectors – 500 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 16–14 AWG conductors with the Install Bay BNBC-5 nylon butt connectors. This 500-piece package supplies blue insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 500-piece bag offers a larger replenishment quantity without changing the specified wire range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eBlue nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e500 individual butt connectors per package, not 500 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBNBC-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e500 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 16–14 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis BNBC-5 listing is one package of 500 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 16–14 AWG range and the BNBC-5 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113262820,"sku":"BNBC-5","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bnbc-5.jpg?v=1792776436"},{"product_id":"install-bay-ynbc","title":"Install Bay YNBC Yellow 12–10 AWG Nylon Butt Connectors – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 12–10 AWG conductors with the Install Bay YNBC nylon butt connectors. This 100-piece package supplies yellow insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 100-piece bag keeps this specific wire size together for consistent selection at the workbench.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12–10 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eYellow nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e100 individual butt connectors per package, not 100 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eYNBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12–10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 12–10 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis YNBC listing is one package of 100 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 12–10 AWG range and the YNBC part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113393892,"sku":"YNBC","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-ynbc.jpg?v=1792776436"},{"product_id":"install-bay-ynbc-1","title":"Install Bay YNBC-1 Yellow 12–10 AWG Nylon Butt Connectors – 1,000 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 12–10 AWG conductors with the Install Bay YNBC-1 nylon butt connectors. This 1,000-piece package supplies yellow insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 1,000-piece bag suits repeat installation work and restocking a frequently used connector size.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12–10 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eYellow nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e1,000 individual butt connectors per package, not 1,000 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eYNBC-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12–10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1,000 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 12–10 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis YNBC-1 listing is one package of 1,000 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 12–10 AWG range and the YNBC-1 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 Warning\u003c\/h2\u003e\u003cp\u003eThis product can expose you to Antimony oxide (antimony trioxide) , which is known to the State of California to cause cancer, and Bisphenol a (BPA) , which is known to the State of California to cause birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e .\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113426660,"sku":"YNBC-1","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-ynbc-1.jpg?v=1792776436"},{"product_id":"install-bay-ynbc-5","title":"Install Bay YNBC-5 Yellow 12–10 AWG Nylon Butt Connectors – 500 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eJoin matching 12–10 AWG conductors with the Install Bay YNBC-5 nylon butt connectors. This 500-piece package supplies yellow insulated inline splices for building or repairing wiring connections where a permanent crimped joint is preferred over a removable plug.\u003c\/p\u003e\u003cp\u003eThe nylon sleeve insulates the crimp area and provides resistance to abrasion and impacts. The butt-splice layout accepts wire ends from opposite sides, keeping the splice in line with the harness rather than adding a stud or blade connection. The 500-piece bag offers a larger replenishment quantity without changing the specified wire range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12–10 AWG wire range identifies the intended conductor size.\u003c\/li\u003e\n\u003cli\u003eYellow nylon insulation distinguishes this connector at the bench.\u003c\/li\u003e\n\u003cli\u003e500 individual butt connectors per package, not 500 wire pairs.\u003c\/li\u003e\n\u003cli\u003eInline splice format for a compact, permanent crimp connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eYNBC-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eInline butt splice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12–10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e500 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck the conductor size at both ends of the splice and use a crimping tool appropriate for the 12–10 AWG connector. Prepare the wire without cutting strands, crimp each end securely, and inspect and gently pull-test the finished connection with the circuit de-energized. The nylon sleeve is not a stated waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow many connectors are included?\u003c\/h3\u003e\u003cp\u003eThis YNBC-5 listing is one package of 500 individual butt connectors. The listed price is for the package, not one loose connector.\u003c\/p\u003e\u003ch3\u003eIs this a removable connector?\u003c\/h3\u003e\u003cp\u003eNo. A butt splice is a crimped wire joint, not a male\/female disconnect. Choose a mating disconnect system if the circuit needs regular separation.\u003c\/p\u003e\u003ch3\u003eCan I choose the size from the insulation color alone?\u003c\/h3\u003e\u003cp\u003eUse the specified 12–10 AWG range and the YNBC-5 part number. Color helps identification but does not replace checking wire size.\u003c\/p\u003e\u003ch3\u003eIs a crimp tool included?\u003c\/h3\u003e\u003cp\u003eThis package contains connectors only. Use a suitable crimping tool and follow the installation requirements for the circuit.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 Warning\u003c\/h2\u003e\u003cp\u003eThis product can expose you to Acetaldehyde , which is known to the State of California to cause cancer. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e .\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808113459428,"sku":"YNBC-5","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-ynbc-5.jpg?v=1792776436"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/install-bay-rnbc.jpg?v=1792778531","url":"https:\/\/www.12voltoutlet.com\/collections\/butt-connectors.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}