{"title":"DS18","description":null,"products":[{"product_id":"ds18-8hd800ncfd-8-8-water-proof-carbon-fiber-mid-bass-and-driver-coaxial-hybrid-neodymium-magnet-8-ohm-each","title":"DS18 8HD800NCFD-8 8\" Water Proof Carbon Fiber Mid Bass and Driver Coaxial Hybrid Neodymium Magnet 8-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 8HD800NCFD-8 is an 8-inch water-resistant carbon fiber mid-bass with a built-in coaxial hybrid compression horn driver, delivering high output with precise full-range performance in demanding environments. Designed for rugged installs—from motorcycles to boats and regular vehicles—it pairs an 8Ω woofer with an 8Ω driver, delivering 400W RMS (800W max) and 105 dB sensitivity for serious headroom.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 8\" \/ 203mm — standard footprint that fits a wide range of enclosures and mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance (Woofer \/ Driver)\u003c\/b\u003e: 8 \/ 8 Ohms — equal impedance per section simplifies amplifier matching and crossover planning in a coaxial two‑way setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling (Combined)\u003c\/b\u003e: 400W — continuous power capacity to sustain musical transients without clipping in demanding installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling (Combined)\u003c\/b\u003e: 800W — peak capability for brief loud passages or dynamic scenes without damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity (1W\/1m) Combined\u003c\/b\u003e: 105dB — high efficiency means more SPL with less amplifier power, useful in constrained spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response (Combined)\u003c\/b\u003e: 40Hz–20kHz — broad range that covers deep bass through extended highs for a full‑range listen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWater-Resistant Carbon Fiber Cones\u003c\/b\u003e: built to resist moisture and environmental exposure, improving durability in marine, motorcycle, and automotive applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFour Terminals (Two for Midrange, Two for Driver)\u003c\/b\u003e: flexible wiring options to tailor the signal path between midbass and coaxial horn driver for tuning and installation versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuilt-in Coaxial Hybrid Driver (Two‑Way)\u003c\/b\u003e: integrated compression horn provides high‑frequency extension without needing external crossover components, simplifying installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold In\u003c\/b\u003e: Singles or Pairs — you can configure a stereo pair or use multiple singles for custom arrays; grill included: No.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a real build, the 8HD800NCFD-8 delivers authoritative midbass impact together with crisp high-end articulation through the built‑in horn, all in a weather‑resistant package ideal for boats, motorcycles, and everyday vehicles. Its 105 dB sensitivity and 40 Hz low end enable robust output with modest amplifier power, while the four‑terminal design provides flexible wiring and crossover options for precise system tuning without adding external components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242236644,"sku":null,"price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/8HD800NCFD-4-FRONT_700x_f537b35a-9c03-48a6-804f-dc2c37cea3f5.jpg?v=1789261676"},{"product_id":"ds18-6pro300mr-4-pro-6-5-high-sensitivity-professional-mid-range-loudspeaker-150-watts-rms-4-ohm","title":"DS18 6PRO300MR-4 PRO 6.5” High Sensitivity Professional Mid-Range Loudspeaker 150 Watts Rms 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 6PRO300MR-4 is a 6.5\" high-sensitivity professional mid-range driver built for demanding car-audio installs, delivering 150W RMS into a 4-ohm load with efficient, clean output. Its copper demodulating rings and curvilinear cone are tuned for low distortion and broad dispersion at high excursion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" (165mm) cone defines the driver’s footprint and midrange surface area for clear, articulate sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — affects amplifier compatibility and damping, enabling strong, controlled playback with a wide range of car amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 150W — continuous power rating guides amplifier matching to avoid thermal stress during extended listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax Power Handling\u003c\/b\u003e: 300W — peak tolerance for transient musical peaks and test signals without risking damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 102 dB (1W\/1m) — high efficiency means more output from modest power, enhancing perceived loudness in vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 100Hz–12.5kHz — covers upper bass through mid\/high treble, influencing crossovers and enclosure design in a multi-way system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDemodulating Rings\u003c\/b\u003e: Copper rings reduce harmonic and intermodulation distortion from voice-coil movement, yielding cleaner, more linear output at higher levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Shape\u003c\/b\u003e: Curvilinear cone for improved dispersion without sacrificing efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTerminals\u003c\/b\u003e: Push terminals (8 AWG) provide secure, straightforward wiring and reliable connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1.25\" (31.7mm) Kapton former — large, heat-tolerant coil supports sustained high-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWinding Material\u003c\/b\u003e: CCAW — copper-clad aluminum winding balances weight and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone\/Dust Cap Materials\u003c\/b\u003e: Paper cone with a paper dust cap — conventional midrange voicing with smooth breakup characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpider\/Surround\u003c\/b\u003e: Cloth surround and 4\" spider diameter — supports controlled linear movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet\u003c\/b\u003e: Ferrite — provides a compact, solid motor for this mid-range driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions\u003c\/b\u003e: 6.7\" (170mm) diameter, 3\" (78mm) depth; 5.87\" (149mm) cutout; mounting depth 2.83\" (72mm); motor diameter 4.72\" (120mm) — compact, installation-friendly sizing for a variety of enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a properly designed car-audio system, the 6PRO300MR-4 delivers articulate midrange with high efficiency and low distortion, even at elevated listening levels. The combination of copper demodulating rings and a curvilinear cone enhances linearity and dispersion, while the Kapton-based voice coil and heat-management features support longer sessions without performance loss. This driver is well-suited for professional multi-way setups where precise midrange presence and reliable thermal performance are essential.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242269412,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6PRO300MR-4-FRONT_700x_c079d286-569b-4d6b-82ae-540bfb9a305c.jpg?v=1789261678"},{"product_id":"ds18-ddx6-9ml-6-9-touchscreen-mechless-double-din-headunit-with-bluetooth-usb-and-mirror-link","title":"DS18 DDX6.9ML 6.9\" Touchscreen Mechless Double-Din Headunit with Bluetooth, USB and Mirror Link","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 DDX6.9ML is a 6.9-inch mech-less double-DIN digital media receiver with a capacitive touchscreen, built for car-audio enthusiasts who want modern media features and smartphone mirroring in a clean dash install.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDisplay\u003c\/b\u003e: 6.9\" TFT capacitive touchscreen, 1024 × 600, 16:9 format for crisp visuals and responsive control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMech-Less Double-DIN\u003c\/b\u003e: No CD drive; fits standard double-DIN dash openings with touch-based navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower \u0026amp; Audio\u003c\/b\u003e: 40W x 4 max; 15W x 4 RMS at 4 Ω; provides adequate headroom for front\/rear speakers and external amplification; pre-amp outputs 4.5V (Front\/Rear) and 7V (Sub).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnectivity\u003c\/b\u003e: Bluetooth 4.1 with audio streaming and hands-free calls; Mirror Link to mirror phone media on the head unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUSB \u0026amp; SD Media\u003c\/b\u003e: USB\/SD playback up to 64GB; supports RMVB, MPG4, AVI, MP3, WMA, JPEG, DivX; two USB ports (front and rear) with up to 1.5A supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVideo \u0026amp; I\/O\u003c\/b\u003e: Front\/Rear camera input via RCA; A\/V Aux input; dual video output; supports up to 720p camera input and 1080p video playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTuner \u0026amp; Regions\u003c\/b\u003e: FM 87.5–107.9 MHz; AM 530–1710 kHz; 30 preset stations; region selectable (USA, Latin, Japan, Asia, Europe, OIRT, Australia, Mid-East).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEqualizer\u003c\/b\u003e: 16-band EQ with center frequencies: 35Hz, 60Hz, 80Hz, 120Hz, 160Hz, 250Hz, 320Hz, 400Hz, 600Hz, 800Hz, 1kHz, 3kHz, 5kHz, 8kHz, 12.5kHz, 16kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical \u0026amp; Power Specs\u003c\/b\u003e: Chassis 178 × 100 × 165 mm; bezel 170 × 96 × 5 mm; weight 820 g; rated power 14.4V DC (10.8–15V operation); max current 10A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplay \u0026amp; Environment\u003c\/b\u003e: 6.9\" display; operating temperature −20°C to 60°C (−4°F to 140°F).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DS18 DDX6.9ML is designed to integrate smartphone media and modern playback into a single, feature-rich head unit. With Mirror Link and Bluetooth, two USB ports for convenient media and charging, and wide media format support up to 64GB, it offers a flexible foundation for a clean, capable car audio upgrade. The 4.5V front\/rear and 7V sub pre-out levels, plus a 16-band EQ and region controls, give you meaningful control when tuning for your vehicle and listening space.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242302180,"sku":null,"price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DDX6.9ML-SCREEN-2000x2000_700x_91405554-7a6b-4154-ba71-ea05a6b78436.webp?v=1789261679"},{"product_id":"ds18-6xl600-4-xl-6-5-mid-range-loudspeaker-300-watts-rms-4-ohm","title":"DS18 6XL600-4 XL 6.5\" Mid-Range Loudspeaker 300 Watts Rms 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 6XL600-4 is a 6.5\" mid-range loudspeaker rated for 300W RMS (600W max), built for high-power car audio systems where clean midrange and dynamic headroom matter. With 97 dB sensitivity and a 60 Hz–12.5 kHz frequency range, it delivers articulate detail and strong presence when paired with the right crossover.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165 mm — standard fit for 6.5\" mid-range installations, making enclosure and mounting straightforward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — typical load that balances amplifier compatibility with efficient power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 300 Watts — continuous power capability for sustained listening without clipping or distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling\u003c\/b\u003e: 600 Watts — peak handling for dynamic transients and program material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 97 dB (1W\/1m) — higher efficiency means louder output with less amplifier power required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 60 Hz – 12.5 kHz — covers lower mids through treble, enabling detailed vocal and instrument reproduction when crossed correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 100 Hz — blocks deep bass from reaching the mid-range, preserving clarity and reducing distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2\" \/ 50.8 mm — larger coil aids heat dissipation and excursion handling for bass and mids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum, Satin Black — rigid framework that minimizes frame flex and unwanted vibration for cleaner sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet\u003c\/b\u003e: Ferrite, 34 Oz — provides strong motor force for controlled motion and dynamic response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Details\u003c\/b\u003e: Front Mount Baffle Cutout 5.9\" \/ Depth 3.14\" — fits common 6.5\" openings with manageable installation depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTerminals\u003c\/b\u003e: Spring-loaded push terminals — easy, secure connections that simplify wiring and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement\u003c\/b\u003e: 0.45 L \/ 0.015 ft³ — modest enclosure volume helps predict ideal enclosure tuning and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a typical car audio build, the 6XL600-4 serves as a dedicated mid-range driver or as part of a multi-driver setup where articulate vocal articulation and instrument attack are crucial. Its rigid aluminum basket, ventilation for heat dissipation, and distortion-reducing design work together to maintain clarity at high output, while the 4-ohm impedance and 97 dB sensitivity enable effective pairing with a suitable amplifier and crossover to deliver clean, powerful midrange performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242334948,"sku":null,"price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6XL600-4-FRONT_700x_70ee1fb6-c46b-402c-83f7-f7584713ef25.jpg?v=1789261681"},{"product_id":"ds18-8pro300mb-4-8-mid-bass-loudspeaker-300-watts-4-ohm","title":"DS18 8PRO300MB-4 8\" Mid-Bass Loudspeaker 300  Watts 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 8PRO300MB-4 is an 8-inch mid-bass loudspeaker built for car audio enthusiasts who need controlled, high-output mid-bass in pro audio or competition systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 8 inches \/ 203 mm, sized for common door or custom enclosure applications while maintaining focused mid-bass projection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Handling\u003c\/b\u003e: 150 W RMS and 300 W maximum, paired with a 1.5-inch CCAW voice coil on a Kapton former for sustained output without thermal compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 97 dB (1 W \/ 1 m), providing high acoustic output from moderate amplifier power in typical vehicle installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 60 Hz–5 kHz with an 80 Hz recommended high-pass crossover, delivering clean mid-bass down to the crossover point while integrating smoothly with subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpedance\u003c\/b\u003e: 4 ohm nominal, allowing straightforward wiring into most multi-channel or bridged amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMotor Assembly\u003c\/b\u003e: 20 oz ferrite magnet with steel basket in satin black finish, yielding a 0.48 L displacement volume for compact box designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThiele-Small Parameters\u003c\/b\u003e: Qts 0.34, Vas 16.4 L, Fs 85 Hz, Xmax 9.8 mm, supporting sealed or vented alignments that emphasize punch and transient response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis speaker suits dedicated mid-bass arrays or three-way front stages where vocal clarity and impact must remain distortion-free at high SPL levels. Its single-unit packaging and 3.6-inch mounting depth simplify retrofits into doors or custom pods without requiring major fabrication changes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242367716,"sku":null,"price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/8PRO300MB-4-FRONT_700x_3cf16158-4fbf-4ac6-be12-bbaf76cf1fc3.jpg?v=1789261682"},{"product_id":"ds18-6pro300mb-4-6-mid-bass-loudspeaker-300-watts-4-ohm","title":"DS18 6PRO300MB-4 6\" Mid-Bass Loudspeaker 300  Watts 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 6PRO300MB-4 is a 6.5\" mid-bass loudspeaker built for enthusiasts who demand punchy bass and clear midrange in professional-grade car audio installs. It handles 150W RMS (300W max) into 4 ohms and covers 80 Hz to 6 kHz for solid mid-bass performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — provides a larger cone area for stronger mid-bass presence and better low-mid extension in typical car enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohm — standard load that integrates with common high-performance amps and helps achieve efficient system power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 150W — continuous power the driver can sustain without thermal stress under regular use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 300W — peak capability to handle dynamic transients in music with authority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity (1W\/1m)\u003c\/b\u003e: 96 dB — efficiency rating indicating how loud the speaker will be per watt of input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 80Hz–6KHz — mid-bass to upper-midrange range, essential for accurate reproduction of bass fundamentals and lower mids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended High Pass Crossover\u003c\/b\u003e: 100Hz — suggested lower boundary to protect the driver and optimize integration with other components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1.5\" \/ 38.1mm — larger coil aids heat dissipation and power handling under high excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Kapton — high-temperature stability for reliable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWinding Material\u003c\/b\u003e: CCAW — conductive winding designed for durability and efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Paper — traditional cone with predictable break-up and damping characteristics.\u003c\/li\u003e\n\u003cli\u003e\u003cb cap material\u003e: Paper\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 20 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement Volume\u003c\/b\u003e: 0.32L \/ 0.011ft3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVas\u003c\/b\u003e: 2.79L \/ 0.098ft3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eXmax\u003c\/b\u003e: 9.4mm (one-way) — indicates how far the cone can travel for clean, linear excursion under power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFs\u003c\/b\u003e: 142Hz — low-frequency resonant point affecting in-car bass behavior and enclosure tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQts\u003c\/b\u003e: 0.39, \u003cb\u003eQes\u003c\/b\u003e: 0.47, \u003cb\u003eQms\u003c\/b\u003e: 2.09 — overall damping and system alignment indicators for enclosure design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSd\u003c\/b\u003e: 130.7 cm2 — effective cone area impacting bass output and efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRe\u003c\/b\u003e: 3.5 Ohms — DC resistance contributing to the overall electrical loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold\u003c\/b\u003e: Single — available as an individual unit for flexible configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: No — requires separate grille if needed for protection and aesthetics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car build, the 6PRO300MB-4 serves as the dedicated mid-bass element in a two- or three-way setup, delivering confident bass fundamentals and crisp upper-mrequency detail. Its 4-ohm impedance and 96 dB sensitivity help you achieve loud, clean output without excessive amplifier power, while the 80 Hz–6 kHz range keeps mids articulate and punchy. The design choices—1.5\" Kapton voice coil, CCAW windings, paper cone, and ferrite magnet—support reliable performance under typical dash or door installations, with a safe 100 Hz high-pass crossover to protect the coil and maintain clear midrange performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242400484,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6PRO300MB-4-FRONT_700x_c33273fe-a156-4f66-987b-b3e85a0151d7.jpg?v=1789261684"},{"product_id":"ds18-gen-x1200-1-class-ab-1-channel-monoblock-amplifier-1200-watts","title":"DS18 GEN-X1200.1 Class AB 1-Channel Monoblock Amplifier 1200 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 GEN-X1200.1 is a lightweight yet sturdy 1-channel Class AB monoblock amplifier delivering 1200W of total power, built for car audio enthusiasts who demand high-output bass with precise control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePower output\u003c\/b\u003e: 1200W total in a single-channel monoblock design, providing the ability to drive a dedicated sub with ample headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 Ohm RMS\u003c\/b\u003e: 310W RMS at 1 Ohm, giving real-world continuous power into a low-impedance load for tight, impactful bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpedance range\u003c\/b\u003e: Compatible with 1–4 Ohms, offering wiring flexibility for a variety of subwoofers and configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeat management\u003c\/b\u003e: High-efficiency heat sink design keeps the unit cool during extended playback for reliable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover controls\u003c\/b\u003e: Fully adjustable crossover filters let you tailor bass frequencies to your subwoofers and system lineup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurability and aesthetics\u003c\/b\u003e: Lightweight but sturdy chassis with a signature DS18 logo that lights up for a premium visual cue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation consideration\u003c\/b\u003e: Designed to operate without the need for a secondary or high-output alternator, simplifying power delivery in compatible vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, the GEN-X1200.1 powers a dedicated sub or bass array with 1–4 Ohm loads, delivering 310W RMS at 1 Ohm for strong, controlled bass. The adjustable crossover enables clean integration with other components, while the efficient heat sink supports extended listening sessions. The durable, lightweight chassis eases installation, and the illuminated DS18 logo adds a refined visual touch to a high-performance setup.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242433252,"sku":null,"price":215.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GEN-X1200.1-2000x2000_700x_cd34d97e-85f5-4e21-a892-61e14e377378.webp?v=1789261686"},{"product_id":"ds18-6xl650nb-4-pro-6-neodymium-mid-325w-4ohm","title":"DS18 6XL650NB-4 XL 6.5\" Neodymium Mid-Range Loudspeaker With Bullet 325 Watts Rms 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 6XL650NB-4 is a 6.5\" neodymium mid-range loudspeaker with a bullet, built for high‑definition car audio where precise midband performance matters. It handles 325W RMS (650W max) at 4 ohms, delivering detailed vocal and instrument reproduction across a broad 80Hz–12.5kHz window.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" (165mm) – a standard midrange size that fits typical 6.5\" openings, balancing cabinet space with midband clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohm – a common automotive load that pairs well with many amplifiers for efficient power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 325 watts – continuous power rating indicating how much sustained power the driver can reasonably handle in normal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax Power Handling\u003c\/b\u003e: 650 watts – peak capability for brief transients without exceeding mechanical limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 97 dB (1W\/1m) – higher efficiency means more output from a given amp power, aiding loudness in the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 80Hz–12.5kHz – broad midrange to high-end coverage, suitable for detailed vocal and instrument reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2\" (50.8mm) – larger coil helps sustain power handling and thermal management; Kapton former improves heat resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Non-pressed Paper – provides the midrange tonal character with controlled breakup and clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Neodymium (11.4 oz) – compact, strong magnet for a lighter assembly with solid transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBullet Material\u003c\/b\u003e: Aluminum – contributes dispersion and upper-frequency extension for smoother overall coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Cloth – durable, compliant edge support that maintains stiffness under excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum, Satin Black – rigid frame minimizes flexing and distortion for clean midrange delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Details\u003c\/b\u003e: Front Mount Baffle Cutout 5.9\" (150mm); Mounting Depth 2.83\" (72mm); Overall Diameter 6.7\" (170mm) – installation footprint suitable for typical 6.5\" openings with a compact depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Crossover\u003c\/b\u003e: High Pass 100Hz – guidance to protect the midrange from low-frequency energy that can mask clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As\u003c\/b\u003e: Sold in Pair or Single; \u003cb\u003eGrill Included\u003c\/b\u003e: No – flexible installation options for single or paired configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car build, this mid-range shines as the dedicated middriver in a front-stage or multi-way setup, delivering articulate vocal presence and instrument detail. The combination of 4-ohm impedance, 97 dB sensitivity, and a generous 80Hz–12.5kHz bandwidth supports strong, clean midrange performance when paired with a appropriate amplifier and crossover, while the neodymium magnet, 2\" voice coil, and aluminum bullet contribute to responsive transient behavior and controlled dispersion. The 5.9\" cutout and 2.83\" mounting depth provide installation flexibility in standard 6.5\" locations, making it a practical upgrade for enthusiasts pursuing precise midrange performance without excessive bulk.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242466020,"sku":null,"price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6XL650NB-4-FRONT_700x_ad77296a-6241-4ffa-b4f4-62eb11896d04.jpg?v=1789261688"},{"product_id":"ds18-8pro300mb-8-8-mid-bass-loudspeaker-300-watts-8-ohm","title":"DS18 8PRO300MB-8 8\" Mid-Bass Loudspeaker 300  Watts 8-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 8PRO300MB-8 is an 8-inch mid-bass loudspeaker built for high-output car audio systems, delivering punchy bass and clean mids up to 5 kHz. With 150W RMS (300W max) into an 8-ohm load and a sensitivity of 97 dB (1W\/1m), it pairs strong output with manageable amplifier demand.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e8\" nominal diameter\u003c\/b\u003e: 8\" \/ 203mm driver designed for mid-bass duties in automotive installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 8 Ohm – provides a stable load for typical car amplifiers and flexible wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 150W – continuous input rating to sustain loud playback without thermal strain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 300W – supports brief peaks without distortion when driven by capable amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 97 dB (1W\/1m) – higher sensitivity means more output from less power, aiding high-SPL builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 60 Hz – 5 kHz – covers bass fundamentals and extends into the lower midrange for a cohesive front-stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil\u003c\/b\u003e: 1.5\" diameter, Kapton former, CCAW winding – engineered for heat tolerance and reliable excursion at high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstructions \u0026amp; Materials\u003c\/b\u003e: Cone Paper; Dust Cap Paper; Surround Cloth; Basket Steel; Magnet Ferrite – a durable, cost-effective build for long-term performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical dimensions\u003c\/b\u003e: Overall 8.2\" diameter, Depth 3.8\" (3.6\" mounting depth), Front-mount cutout 7\" – enables compatibility with common mounting substrates and standard cutouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 5.5 lb per unit – relatively lightweight for an 8\" mid-bass driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car installation, the DS18 8PRO300MB-8 provides the dedicated mid-bass portion of a high-output system, delivering bass presence and clear midrange without excessive power demand. Its 8-ohm impedance and 97 dB sensitivity help balance system efficiency with loudness, while the 60 Hz low end and 5 kHz high end give you fundamental bass through to lower midrange, enabling coherent integration with treble drivers. The 1.5\" voice coil, Kapton former, and CCAW winding support reliable heat management during extended listening, helping preserve dynamics at higher volumes. With a front-mount cutout of 7 inches and an overall diameter of 8.2 inches, it installs in common automotive mounting spaces without requiring unusual space.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242498788,"sku":null,"price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/8PRO300MB-4-FRONT_700x_1.jpg?v=1789261689"},{"product_id":"ds18-6pro300mb-8-6-mid-bass-loudspeaker-300-watts-8-ohm","title":"DS18 6PRO300MB-8 6\" Mid-Bass Loudspeaker 300 Watts 8-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 6PRO300MB-8 is a 6.5-inch, 8-ohm mid-bass loudspeaker designed for high-output car audio systems. It handles 150W RMS (300W max) and covers 80 Hz–6 kHz for punchy mid-bass with clear articulation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — standard cutout size for many 6.5\" door and kick-panel installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpedance\u003c\/b\u003e: 8 Ohm — moderate load that pairs well with a wide range of amplifiers and helps manage heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 150W — continuous power rating indicating how much signal the driver can sustain reliably with proper cooling and crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 300W — peak capability for short-term musical transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 96 dB (1W\/1m) — higher efficiency means louder playback from a given amp power in a car cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 80 Hz–6 kHz — covers deep mid-bass through upper midrange for a cohesive front stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended High-Pass Crossover\u003c\/b\u003e: 100 Hz — recommended filter point to protect the woofer and integrate with treble components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil\u003c\/b\u003e: 1.5\" (38.1mm) Kapton former, CCAW winding — robust coil design handles power with thermal stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterials\u003c\/b\u003e: Cone Paper; Dust Cap Paper; Surround Cloth; Basket Steel; Magnet Ferrite — durable, non-metallic voice-coil assembly with a solid magnet structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMechanical Dimensions\u003c\/b\u003e: Overall diameter 6.5\" (166mm); Front-mount cutout 5.6\" (143mm); Mounting Depth 2.8\" (73mm); Depth 3.1\" (79mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 5 lb per unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Sold as Single or Pair; Grill Included: No.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThiele–Small Parameters\u003c\/b\u003e: Vas 3.97L; Fs 120 Hz; Qms 1.76; Qes 0.49; Qts 0.38; Mms 10.85 g; Cms 0.16 mm\/N; Bl 9.77; Le 0.2 mH; Sd 130.7 cm2; Re 5.7 Ω.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a multi-way front-stage, the 6PRO300MB-8 excels in door or kick-panel mounting where its compact depth and 8-ohm design enable efficient pairing with midrange\/tweeter components. Its 96 dB sensitivity helps you achieve loud mid-bass with modest amplifier power, while the 80 Hz lower limit provides solid bass presence within its intended range—great for premium, punchy mid-bass performance in a focused audio build.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242531556,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6PRO300MB-4-FRONT_700x_67ca4429-c7ed-400b-ba2c-c32cc17e8b6b.jpg?v=1789261691"},{"product_id":"ds18-g6-5xi-gen-x-5-25-2-way-coaxial-speakers-135-watts-4-ohm","title":"DS18 G6.5XI GEN-X 5.25\" 2-Way Coaxial Speakers 135 Watts 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 G5.25XI GEN-X 5.25\" 2-Way Coaxial Speakers deliver high-output, full-range sound from a compact 5.25\" package, built to endure the road with a rugged steel basket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 5.25\" \/ 133mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 45W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 135W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity (1w\/1m)\u003c\/b\u003e: 84dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 50Hz-20kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended HI Pass Crossover\u003c\/b\u003e: 80Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of Ways\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1\" \/ 25.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: ASV\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Barium Ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront Mount Baffle Cutout\u003c\/b\u003e: 4.52\" \/ 115mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Depth\u003c\/b\u003e: 1.97\" \/ 50mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for amplifiers but workable with many factory 4-ohm systems, the G5.25XI uses a 2-way layout with a woofer and a Mylar balanced-dome tweeter to extend high frequencies while maintaining solid midbass. The chassis’s steel basket resists flex and fatigue in the car’s vibro-dynamic environment, helping maintain clarity under load. The 50Hz lower limit and 50Hz–20kHz range cover bass fundamentals and bright highs for a compact, high-fidelity front-stage upgrade. With 4-ohm impedance and a 45W RMS rating, it pairs well with a broad range of amps while providing clear, uncolored sound without excessive heat or distortion.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242564324,"sku":null,"price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G5.25Xi-FRONT-PAIR_700x_6297eab3-5e66-4d3e-a976-3092821b2983.webp?v=1789261692"},{"product_id":"ds18-dbpx200-mx-digital-bass-processor-with-hi-to-low-signal-converter-speaker-emulator-mexico-design-sku-dbpx200-mx","title":"DS18 DBPX200.MX Digital Bass Processor With Hi to Low Signal Converter \u0026 Speaker Emulator – Mexico Design SKU: DBPX200.MX","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 DBPX200.MX Digital Bass Processor is a compact, Mexico-design bass processor that provides Hi-to-Low signal conversion and a speaker emulator for precise bass shaping in tight vehicle installs. It combines a rugged aluminum housing, anti-corrosion coated PCB, and a dual-knob dash remote for on-the-fly tuning, all with a backdrop of the Mexican flag to show pride while you tune.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOperating Voltage\u003c\/b\u003e: 9–16V designed for typical automotive electrical systems, ensuring stable operation across the car’s power range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Consumption\u003c\/b\u003e: 0.18A, indicating low idle draw to minimize drain when the system is parked or idle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Fuse Rating\u003c\/b\u003e: 1A, providing appropriate protection for the unit within a standard car audio setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Input Terminal Size\u003c\/b\u003e: 16ga, supporting common wiring practices for reliability and ease of installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicator\u003c\/b\u003e: Power \/ Bass Enhancer \/ Clipping, giving clear, at-a-glance status for power, bass Boost activity, and potential signal clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level Speaker Input\u003c\/b\u003e: 2 Channels, enabling OEM integration without requiring separate line-level outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAuto Turn-on Function\u003c\/b\u003e: Yes (Audio\/DC), allowing the processor to power up automatically from audio or DC signal presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Turn-on\u003c\/b\u003e: Input \/ Output, enabling seamless control from the head unit or integration point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes (Bass Enhancer\/Level), giving hands-on bass and level adjustment from the dash remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRCA Connector Type\u003c\/b\u003e: Tiffany (Silver), providing high-quality, low-noise signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHousing Material\u003c\/b\u003e: Aluminum, offering a rigid chassis for durability and heat dispersion in a small form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Color \/ Finish\u003c\/b\u003e: Red \/ Green \/ White (Mexico Theme), enhancing visual appeal in themed builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 10Hz–20kHz, covering the full audible spectrum for accurate bass and overall signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eS\/N Ratio\u003c\/b\u003e: 95dB, contributing to low noise in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTHD\u003c\/b\u003e: 0.05%, indicating low distortion at typical operating levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Sensitivity (Low-Level)\u003c\/b\u003e: \u0026lt;8.8V, and \u003cb\u003eInput Sensitivity (Hi-Level)\u003c\/b\u003e: \u0026gt;15V, describing the signal levels the unit is designed to accept.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 20Kohms, matching typical preamp outputs for stable, noise-resistant operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput Voltage Selectable\u003c\/b\u003e: 5V \/ 7.5V \/ 10V, allowing tailoring of output swing to your amp and speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput Impedance\u003c\/b\u003e: 110ohms, defining a stable drive to downstream components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBalanced Input Noise Rejection\u003c\/b\u003e: \u0026gt;45dB, helping preserve signal integrity in noisy vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStereo Separation\u003c\/b\u003e: \u0026gt;50dB, contributing to a clearer stereo image when used with multi-channel systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubwoofer LPF Frequency Cut-off\u003c\/b\u003e: No (Full Range Signal), meaning the processor can pass full-range bass signals without a fixed subsonic limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubwoofer Infrasonic Frequency Cut-off\u003c\/b\u003e: Selectable (Off\/50Hz), enabling a controllable low-frequency roll-off to protect speakers and manage bass energy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGain\u003c\/b\u003e: 0–8.8V, providing a wide adjustment range for Bass and output level control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCenter Frequency (Sweep)\u003c\/b\u003e: 75Hz–120Hz, allowing precise tuning of bass emphasis in the desired range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQ Factor (Wide)\u003c\/b\u003e: 1–4, enabling broad or narrower bass boost shaping depending on the install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Size\u003c\/b\u003e: Yes, designed for easy installation in a variety of vehicles and mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurface Mount Component Technology\u003c\/b\u003e: Yes, reflecting modern, compact assembly for reliability and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuality Control Verification\u003c\/b\u003e: Verified using Audio Precision Instruments, supporting consistent audio measurements and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control with Clip Indicator\u003c\/b\u003e: Yes, providing visual feedback while adjusting levels to avoid distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions\u003c\/b\u003e: Length 6\" \/ 153mm; Width 3.7\" \/ 95mm; Height 1.1\" \/ 28mm, indicating a compact footprint suitable for tight installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGround Isolation Switch\u003c\/b\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtra Features\u003c\/b\u003e: Hi-Level to Low-Level Signal Converter and Speaker Emulator for flexible integration and enhanced bass shaping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DBPX200.MX is designed to integrate with OEM or aftermarket systems via hi-level inputs, while delivering adjustable bass processing, selectable output levels, and a compact, durable chassis. It suits builds where precise bass control is required without sacrificing launch volume or clarity, and it adds convenient remote control for on-the-fly tuning in a Mexico-themed aesthetic.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242597092,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DBPX200.MX-2000x2000_700x_e73878af-55e8-41f4-829c-1a80085b56e9.webp?v=1789261694"},{"product_id":"ds18-led-btc-rgb-led-lights-bluetooth-control-works-with-android-and-iphone","title":"DS18 LED-BTC RGB LED Lights Bluetooth Control (Works with android and iPhone)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 LED-BTC RGB LED Lights Bluetooth Control is a 12V, app-driven RGB lighting controller built for car enthusiasts who want vivid interior illumination you can sync and adjust from your phone. With Bluetooth 4.0, it supports multi-device control on iOS and Android and carries an IP65 rating for water and dust protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBluetooth 4.0 connectivity\u003c\/b\u003e: Faster speed and longer range than earlier Bluetooth versions, enabling responsive control from the cabin to adjust colors, patterns, or music-synced effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5 Amps of lighting capacity\u003c\/b\u003e: Supports up to 5 A of load for RGB LEDs, delivering bright, saturated color without overtaxing the controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e12 volt applications\u003c\/b\u003e: Designed for 12V automotive electrical systems; connects to standard vehicle power and ground wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for submersible use\u003c\/b\u003e: Not intended to be fully submerged; keep within dry, interior or protected areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIP65 Waterproof\u003c\/b\u003e: IP65-rated, offering protection against water jets and dust for durability in damp or exposed interior environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eiOS – Connect up to 7 controllers\u003c\/b\u003e: iPhone\/iPad users can pair and control up to seven separate controllers for shared or multi-zone lighting control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAndroid – Connect up to 4 controllers\u003c\/b\u003e: Android devices can pair with up to four controllers for flexible, multi-user lighting control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with Android and iPhone\u003c\/b\u003e: Cross-platform Bluetooth control via the DS18 app, no separate hardware needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car audio installation, the LED-BTC acts as an interior lighting layer that highlights components such as speakers, sub enclosures, and amplifiers with vivid RGB color. You can create patterns, synchronize the lights to the beat of the music, or set a steady ambient glow. The multi-controller support helps multiple users share control, while the 12V design and IP65 rating provide straightforward integration and reliable durability in typical automotive environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242629860,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/LED-BTC_700x_690f894b-a9e9-41e2-b129-b1acdc2d719b.webp?v=1789261696"},{"product_id":"ds18-g4xi-gen-x-4-2-way-coaxial-speakers-40-watts-rms-4-ohm","title":"DS18 G4XI GEN-X 4\" 2-Way Coaxial Speakers 40 Watts Rms 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 G4XI GEN-X 4\" 2-Way Coaxial Speakers deliver 40W RMS (120W max) from a compact 4-inch frame, built with a steel basket for vehicle-grade durability and long-term reliability. While designed for amplifiers, they can be used with many 4-ohm factory amplifiers and offer clearer sound and greater range than OEM speakers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 4\" (101 mm) – compact size fits in typical door or dash openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms – standard load for many in-vehicle amplifiers, balancing power delivery and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 40W – continuous power rating; use an amp that can deliver clean power without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 120W – peak capability for short musical transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 84 dB (1W\/1m) – efficiency; higher values mean louder output from the same power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 80 Hz – 20 kHz – covers bass to treble; deep bass relies on the overall system, not just the speaker alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended High-Pass Crossover\u003c\/b\u003e: 90 Hz – protect the woofer and optimize integration with other speakers in a system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDesign\u003c\/b\u003e: 2-Way coaxial with woofer and tweeter – simple installation with full-range performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTweeter\u003c\/b\u003e: Mylar Balanced Dome – adds extended high-frequency detail with smooth response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWoofer Materials\u003c\/b\u003e: Paper cone, rubber surround, steel basket, Ba ferrite magnet – durable construction for daily driving conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil\u003c\/b\u003e: 1\" (25.5 mm) ASV coil – robust for heat and excursion in a compact package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions\u003c\/b\u003e: 4\" diameter, 2.4\" depth; with grill: 5.28\" diameter, 2.46\" depth – installation footprint and grill compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 0.45 kg per speaker – lightweight for easy mounting in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: Yes – protects drivers in aftermarket installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePair\u003c\/b\u003e: Pair – ships as a matched pair for common door\/dash installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car audio build, the G4XI pairs a compact 4\" woofer with a 1\" Mylar tweeter to deliver cohesive, wide-range sound from a small footprint. The 4-ohm impedance and 40W RMS rating align with mid-power amplifiers, while the 80 Hz–20 kHz range provides clear vocals, detailed highs, and confident midbass. The steel basket and durable cone resist road-induced flex, making it suitable for mounting in doors or dashboards. A 90 Hz high-pass crossover recommendation helps tailor the system and protect the woofer from over-excursion. The included grill protects the drivers and preserves a clean aftermarket installation. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242695396,"sku":null,"price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G4Xi-FRONT-PAIR_700x_67b0de76-4ed9-47d9-974f-4f6cfd065c34.webp?v=1789261697"},{"product_id":"ds18-cxt-1-92-silk-dome-tweeter-with-1-voice-coil-and-neodymium-magnet-120-watts-max","title":"DS18 CXT 1.92\" Silk Dome Tweeter With 1\" Voice Coil And Neodymium Magnet 120 Watts Max","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 CXT 1.92\" Silk Dome Tweeter is a compact high-frequency driver built for enthusiasts who demand bright, detailed highs with solid power handling. It pairs a 1.92-inch footprint, 1-inch aluminum voice coil, silk dome, and neodymium magnet to deliver crisp top-end performance up to 120W MAX.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e1.92-inch overall diameter\u003c\/b\u003e: a compact form factor that fits tight dash or door openings while still delivering strong high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1-inch aluminum voice coil\u003c\/b\u003e: lightweight yet stiff for fast transient response, helping preserve detail at higher listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSilk dome diaphragm\u003c\/b\u003e: provides smooth, extended highs with reduced harshness, even when pushed hard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNeodymium magnet (0.33 oz)\u003c\/b\u003e: strong, lightweight magnetic field enables precise control and quick response in a compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAES Power Handling: 30W\u003c\/b\u003e: continuous power rating that supports clean, controlled highs during normal listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax Power Handling: 120W\u003c\/b\u003e: peak capability for brief, high-output passages without distortion or thermal issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged temperature tolerance\u003c\/b\u003e: designed to endure extreme heat and cold, maintaining performance across a range of vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBright high-frequency notes at extreme volumes\u003c\/b\u003e: engineered to preserve detail and clarity even when the system is driven hard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a multi-driver car audio build, this tweeter excels as the high-frequency extension, delivering crisp detail and air without excessive harshness. Its compact size, fast transient response, and strong magnet enable precise imaging and consistent top-end performance across listening levels, making it a solid choice for enthusiasts seeking vivid highs with reliable power handling.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242760932,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/CTX-2000X2000_700x_8a997d3f-39cf-4cb6-8568-6c9f1a25d8db.webp?v=1789261699"},{"product_id":"ds18-6xl600-8-xl-6-5-mid-range-loudspeaker-300-watts-rms-8-ohm","title":"DS18 6XL600-8 XL 6.5\" Mid-Range Loudspeaker 300 Watts Rms 8-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 6XL600-8 is a 6.5” mid-range loudspeaker designed for high‑power car audio builds, delivering 300W RMS (600W max) with 97 dB sensitivity for assertive, articulate midrange. It’s built for enthusiasts who demand real‑world vocal clarity and reliable performance from a compact midrange driver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — a standard midrange footprint suitable for a variety of enclosure and mounting options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 8 Ohm — compatible with common car audio amplifiers and multi‑driver setups, helping manage load and heat across channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 300 Watts — indicates continuous power the driver can sustain without distortion under typical use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling\u003c\/b\u003e: 600 Watts — supports short bursts of higher power for dynamic peaks in music and film content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 97 dB (1W\/1m) — higher efficiency means more output with less amplifier demand, contributing to louder sound from the same power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 60Hz-12.5kHz — covers low to high midrange and extends toward the highs, reducing gaps in the mid\/high spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 100Hz — suggests a low‑frequency cutoff to preserve midrange clarity and minimize bass masking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2\" \/ 50.8 mm — a larger coil supports better heat dissipation and stable power handling at high drive levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum, Satin Black — rigid frame design that helps minimize unwanted vibrations and distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite, 34 Oz — substantial magnetic force to control the cone for steady performance under demanding levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone\/Suspension\/Dust Cap\u003c\/b\u003e: Non-pressed Paper cone with Cloth surround and Paper dust cap — balances stiffness, damping, and efficiency for midrange clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Overall Dimensions\u003c\/b\u003e: 6.7\" (170 mm) diameter, 3.5\" (89 mm) depth; Front Mount Cutout 5.9\" (150 mm); Mounting Depth 3.14\" (80 mm) — precise fitment data for planning installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVentilation\u003c\/b\u003e: Ample ventilation for heat dissipation during prolonged high‑volume listening, supporting consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTerminals\u003c\/b\u003e: Polished high‑quality spring‑loaded push terminals — quick, secure connections with reliable contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car build, the 6XL600-8 excels as a robust midrange driver in high‑power front stages or components where vocal clarity and dynamic highs are essential. The combination of a rigid aluminum basket, substantial ferrite magnet, and ventilated construction helps maintain distortion‑free sound at elevated volumes, while the 8Ω impedance and 97 dB sensitivity promote strong output without overtaxing the amplifier. The included mounting geometry and reinforced terminals simplify installation and reliability in daily use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242859236,"sku":null,"price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6XL600-4-FRONT_700x_0dee7a97-9ae8-4d68-95a9-9d026fc9c0f4.jpg?v=1789261701"},{"product_id":"ds18-g6-5xi-gen-x-6-5-3-way-coaxial-speakers-150-watts-4-ohm","title":"DS18 G6.5XI GEN-X 6.5\" 2-Way Coaxial Speakers 150 Watts 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 G6.5XI GEN-X 6.5\" 2-Way Coaxial Speakers deliver loud, detailed sound in a rugged 6.5-inch package built to survive heavy car vibrations. Designed for amplifiers but compatible with 4-ohm factory amplifiers in many vehicles, they pair durable construction with broad bandwidth for a lasting upgrade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — standard fit for most 6.5\" openings, making installation straightforward in many vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — matches common car amplifiers and many factory outputs for flexible integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Handling\u003c\/b\u003e: RMS 50W, Maximum 150W — provides a clear baseline for continuous use with adequate headroom for peak bursts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 86dB (1W\/1m) — indicates how efficiently the speaker converts power to observable volume; higher means more output per watt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 35Hz–20kHz — covers deep bass and bright highs, enabling full-range listening from this single unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDesign\u003c\/b\u003e: 2-Way coaxial with woofer and Mylar balanced-dome tweeter — compact, installation-friendly, with broad bandwidth for cohesive sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Construction\u003c\/b\u003e: Steel basket — robust frame designed to withstand vehicle vibrations and daily driving conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: Yes — ready for installation with factory or aftermarket grills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Pass Recommendation\u003c\/b\u003e: 60Hz — use a high-pass filter to protect the woofer from excessive deep-bass content and improve overall clarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a typical car audio build, these DS18 G6.5XI coaxials pair a compact 6.5\" footprint with a capable 4-ohm load and a 2-way design to deliver coherent midrange and extended highs without needing separate components. The rugged steel basket and included grill provide a reliable, easy upgrade path for both factory and aftermarket systems.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242924772,"sku":null,"price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G6.5Xi-FRONT-PAIR_700x_7ca18965-ab92-4c16-8f8a-124790482147.webp?v=1789261703"},{"product_id":"ds18-g1800-4d-gen-x-full-range-class-d-4-channel-amplifier-1800-watts","title":"DS18 G1800.4D GEN-X Full-Range Class D 4-Channel Amplifier 1800 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 G1800.4D GEN-X is a 4-channel full-range Class D amplifier delivering up to 1800W peak, built for serious car-audio enthusiasts who demand scalable power and precise control in a compact chassis. Its Class D design has undergone rigorous sound quality verification using AP Instruments, and the G Series is engineered for professional-grade sound reproduction.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e4-Channel Full-Range Class D\u003c\/b\u003e: Four independent channels provide full-range amplification, enabling a complete front\/rear speaker setup from a single unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1800W Peak Power\u003c\/b\u003e: Total maximum output across channels when driven to the limit, providing dynamic headroom for transients and loud playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power (4Ω \/ 2Ω) and Bridged Power\u003c\/b\u003e: 4 x 150W @ 4Ω; 4 x 230W @ 2Ω; Bridge 2 x 430W @ 4Ω — flexible configurations for diverse speaker needs and system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20Hz–20kHz, ensuring the amplifier can reproduce the full audible spectrum with fidelity across channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover \u0026amp; Filters\u003c\/b\u003e: Low Pass 50–250 Hz; High Pass 50–250 Hz; Selectable LPF\/FLAT\/HPF; X-Over Range 50–250 Hz — precise per-channel tuning for coherent imaging and reduced distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Level Input Compatibility\u003c\/b\u003e: Allows direct signaling to your radio unit for straightforward integration into existing installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection \u0026amp; Indicators\u003c\/b\u003e: Protection, Clipping, and Power Indicator LEDs alert you to status and limit conditions; supports short circuit, thermal, and voltage protection to safeguard the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency, Damping, THD\u003c\/b\u003e: 81% efficiency at 4Ω; 78 damping factor; 0.01% THD — clean power with accurate speaker control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower, Wiring \u0026amp; Physical Specs\u003c\/b\u003e: 4GA power input; 80A fuse rating; 12GA speaker outputs; 15V operation; matte black finish; 12.25\" L x 6.25\" W x 3.25\" H.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooling \u0026amp; Build Features\u003c\/b\u003e: Cooling fan included; surface mount component technology supports compact, customizable layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for multi-amp builds or four-speaker setups, the G1800.4D provides four adjustable, full-range channels with configurable crossovers to tailor each speaker’s response. The combination of robust power ratings, protective circuitry, and clear LED indicators helps you achieve a reliable, high-performance install, while the compact, matte-black chassis fits tight spaces and modern dashboards alike.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850242990308,"sku":null,"price":287.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G1800.4D-2000x2000_700x_a994c0f7-af84-416e-ac50-2fd555d6dd90.webp?v=1789261704"},{"product_id":"ds18-gtx1xl-3-75-die-cast-compression-neodymium-super-bullet-tweeter-320-watts-1-3-titanium-4-ohm-vc","title":"DS18 GTX1XL 3.75\" Die Cast Compression Neodymium Super Bullet Tweeter 320 Watts 1.3\" Titanium  4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 GTX1XL is a 3.75\" die-cast aluminum neodymium super bullet tweeter engineered for high-output, detail-rich treble in serious car audio builds. It delivers up to 320W peak with 100 dB sensitivity, spanning 2.5 kHz to 20 kHz for crisp, revealing highs in demanding installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 3.75\" \/ 95mm — defines a compact but capable tweeter footprint compatible with standard 3.75\" mounting spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohm — pairs with a wide range of amplifiers and affects how much power the driver can draw from your amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAES Power Handling\u003c\/b\u003e: 80 Watts — continuous input capability for steady, reliable high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProgram Power Handling\u003c\/b\u003e: 160 Watts — dynamic headroom for musical transients before clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePeak Power Handling\u003c\/b\u003e: 320 Watts — maximum short-term power available for loud, fast transients without damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 100 dB (1W\/1m) — high efficiency means more output from less amplifier power, aiding system balance in multi-driver setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 2.5 KHz – 20 KHz — dedicated to upper-range treble with detailed articulation and shimmer on cymbals and sibilants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1.3\" \/ 33.5mm — larger coil area improves heat handling and linearity during dynamic highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiaphragm Material\u003c\/b\u003e: Aluminum — stiff, lightweight diaphragm for precise high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Neodymium — compact, high-flux magnet contributes to strong, efficient highs in a small chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Material\u003c\/b\u003e: Aluminum — rigid housing that helps minimize cabinet-induced resonances and aids durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Depth\u003c\/b\u003e: 1.73\" \/ 44mm — shallow installation footprint facilitates integration into tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront Mount Cutout\u003c\/b\u003e: 2.95\" \/ 73mm — required opening size for proper physical mounting accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 1.45 oz per unit — very lightweight component suitable for multi-driver arrays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisassembly\/Repair\u003c\/b\u003e: Easily disassembled and repaired on the spot within 60 seconds — supports quick field maintenance and tuning during builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Versatility\u003c\/b\u003e: Can be mounted anywhere you have space, enabling flexible soundstage design and placement choices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a high-performance front stage, GTX1XL acts as the precise treble driver, delivering detailed highs without excessive demand on the rest of the system. Its aluminum construction, neodymium magnet, and 4-ohm voice coil work together to maintain clarity across demanding musical transients, while the compact depth and versatile mounting options simplify integration into various vehicles. The quick-repair capability adds practical reliability for enthusiasts who push their systems and tune on the fly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243023076,"sku":null,"price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GTX1XL-2000x2000_700x_0784fba0-2116-40b7-9cec-f5d8561bd49f.webp?v=1789261706"},{"product_id":"ds18-gen-x154d-ds18-gen-x-15-subwoofer","title":"DS18 GEN-X154D DS18 GEN-X 15\" SUBWOOFER","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 GEN-X154D is a 15\" car subwoofer delivering 500W RMS (1000W MAX) with a dual 4-ohm voice coil and a ferrite magnet, built for enthusiasts who demand accurate, high-output bass in demanding installs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 15\" driver diameter for substantial bass output and strong displacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power\u003c\/b\u003e: 500W continuous handling, enabling consistent performance with a capable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax Power\u003c\/b\u003e: 1000W peak capacity for transient bass energy without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpedance\u003c\/b\u003e: 4 + 4 Ohms (dual voice coil) offering flexible wiring options and better amplifier compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Size\u003c\/b\u003e: 2\" voice coils for effective heat management and controlled motion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Size\u003c\/b\u003e: 70 oz ferrite magnet providing a strong, efficient magnetic field.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Aluminum, contributing to durability and heat handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone\u003c\/b\u003e: Paper with glass fiber construction for rigidity and responsive bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround\u003c\/b\u003e: Foam edge surround supporting smooth cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Cut-Out\u003c\/b\u003e: 14.01\" (356 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Depth\u003c\/b\u003e: 7.63\" (194 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Diameter\u003c\/b\u003e: 15.55\" (395 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 18 Hz – 250 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrame\u003c\/b\u003e: Steel basket for durability and stability under heavy use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn practice, the GEN-X154D pairs with a suitable amplifier to deliver clean, controlled bass across a wide range of music. The dual voice coils provide flexible wiring options and amplifier compatibility, enabling varied configurations and enhanced bass output. The rigid cone and foam surround yield distortion-free bass and precise reproduction down to 18 Hz, making it a strong match for serious car audio builds that demand impactful, accurate low end. Its mounting dimensions—14.01\" cut-out and 7.63\" depth—facilitate installation in most car setups.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243055844,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GEN-X124D-FRONT_700x_c27d9cc7-2547-444d-ace3-7f6586d6995b.webp?v=1789261707"},{"product_id":"ds18-g6-9xi-gen-x-6x9-3-way-coax-180-watts-4-ohm","title":"DS18 G6.9XI GEN-X 6X9 3 WAY COAX 180 WATTS 4 OHM","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 G6.9XI GEN-X 6x9 3-Way Coaxial Speakers are a high-output, durable upgrade for enthusiasts who want clear, wide-range sound from a 6x9\" package. With 60W RMS (180W peak) at 4 ohms and a 3-way design, they deliver detailed bass, precise midrange, and crisp highs for loud, articulate car audio builds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6x9\" \/ 152x228mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 60W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 180W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 86dB (1W\/1m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 35Hz-20kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDesign\u003c\/b\u003e: 3-Way Coaxial (Woofer, Mid-range, Tweeter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTweeter Type\u003c\/b\u003e: Mylar Balanced Dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1\" \/ 25.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi-Pass Crossover\u003c\/b\u003e: 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Dimensions\u003c\/b\u003e: 6.4\" x 9.2\" (163 x 234 mm); with grill 7.24\" x 10.4\" (184 x 264 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, these 6x9 coaxials fit common upgrade paths from OEM speakers and integrate with amplifiers that present a 4-ohm load. The 3-way design distributes duties across bass, midrange, and treble for clearer sound at high SPL without overwhelming the amp, while the 35 Hz low end and 20 kHz top end provide broad tonal coverage. The Mylar tweeters extend high-frequency detail, and the steel basket plus rubber surround offer durability against road vibration. The included grill preserves aesthetics when mounted behind grille perforations, and the overall package is designed to work well with a range of amplifier power without needing excessive current draw.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243088612,"sku":null,"price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G6.9Xi-FRONT-GRILL_700x_b829c5c8-53ad-40a5-85fb-3ca82781f48c.webp?v=1789261709"},{"product_id":"ds18-g5-7xi-gen-x-5x7-3-way-coaxial-speakers-165-watts-4-ohm","title":"DS18 G5.7XI GEN-X 5x7\" 3-Way Coaxial Speakers 165 Watts 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 G5.7XI GEN-X 5x7\" 2-Way Coaxial Speakers are built for loud, reliable street and show setups, featuring a rugged steel basket and a two-way design that pairs a woofer with a tweeter for fuller, more accurate sound across the spectrum. The system is suitable for use with amplifiers and can operate in many factory 4-ohm configurations, offering clearer sound and better clarity than OEM speakers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 5x7\" \/ 127x177mm — fits common 5x7\" openings in doors, rear decks, or dash locations for an easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — compatible with a wide range of amplifiers and factory 4-ohm outputs, balancing draw and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 50W — continuous power rating, suitable for moderate listening levels with good clarity and headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 150W — peak capability for brief transients without clipping when paired with appropriate amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 85dB (1W\/1m) — efficiency metric that translates to usable loudness from a given amp, aiding in system cabinet and amp matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 40Hz–20kHz — broad range from deep bass to sparkling highs, enabling a full-range imaging in a 5x7\" package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDesign\u003c\/b\u003e: 2-way Coaxial with Woofer and Tweeter; Mylar Balanced Dome Tweeters — integrated high-frequency hornless tweeters for coherent imaging and extended top end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi Pass Crossover (Recommended)\u003c\/b\u003e: 70Hz — guidance for blocking radiator-low frequencies to keep the woofer linear and reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrille Included\u003c\/b\u003e: No — installation compatibility considerations without a factory grille, depending on vehicle and mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWoofer\/Vocal Details\u003c\/b\u003e: 1\" voice coil, Paper cone, Rubber surround, Steel basket, Barium Ferrite magnet — durable construction aimed at smooth midbass and consistent excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTweeter Details\u003c\/b\u003e: 1\" Mylar balanced dome with Neodymium magnet — lightweight, fast response high frequencies with compact magnet design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions \u0026amp; Mounting\u003c\/b\u003e: Front Mount Cutout 4.9\" x 7\"; Mounting Depth 2.13\"; Overall Diameter 5.57\" x 7.6\" — clear fitment guidance for common 5x7\" openings and typical installation depths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a car audio build, these DS18 G5.7XI GEN-X 5x7\" speakers upgrade OEM 4-ohm systems with clearer midrange and extended high end, while delivering solid bass without overpowering the vehicle’s power. The steel basket and two-way design resist vibration and distortion from road use, ensuring durability in daily driving and show cars. With a 70Hz high-pass recommendation, they integrate well with a sub or bass amplifier to preserve woofer linearity, while the 40Hz bass floor and 85dB sensitivity enable meaningful loudness without demanding excessive amplifier power. This pair is a practical, install-ready upgrade for 5x7\" openings seeking improved clarity, dynamics, and overall soundstage without complex crossovers. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243121380,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G5.7Xi-PAIR-2000x2000_700x_aa805ab7-d245-48c6-9e5c-50564c420df6.webp?v=1789261711"},{"product_id":"ds18-bt-two-bluetooth-streaming-audio-receiver-works-with-android-and-iphone","title":"DS18 BT-TWO Bluetooth Streaming Audio Receiver (Works with android and iPhone)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 BT-TWO Bluetooth Streaming Audio Receiver is a compact wireless receiver built for automotive, marine, and powersport installations, delivering Android and iPhone streaming with a low 20 mA power draw.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBT 4.0 wireless technology\u003c\/b\u003e: Provides higher sound quality, faster transmission, and up to a 150 ft range, enabling flexible placement and reliable playback across the vehicle or watercraft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIP65 waterproof rating\u003c\/b\u003e: Durable in exposed environments typical of cars, boats, and outdoor builds, while not designed for submersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStereo Male RCA Output\u003c\/b\u003e: Lets you feed a standard stereo amp or head unit from the receiver’s output for clean, amplified sound in your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Trigger Output\u003c\/b\u003e: Enables integration with other components to power on\/off or switch inputs as part of a complete install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow Current Draw: 20 mA\u003c\/b\u003e: Minimizes parasitic drain on the vehicle or vessel battery, helping extend driving time between charges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInline Fuse Protection\u003c\/b\u003e: Provides protection against power surges and voltage irregularities to safeguard your audio setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: Designed for use with Android and iPhone devices, ensuring broad device support for wireless streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDesigned For All Elements Applications\u003c\/b\u003e: Suitable for Automobile, Marine, Powersport \u0026amp; More, offering versatile deployment in various environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a real-world build, the BT-TWO acts as a wireless bridge between your mobile device and your RCA-enabled audio system, enabling seamless streaming from Android or iPhone. The RCA output suits installations that route audio into an amplifier or head unit, while the remote trigger output simplifies system control. Its IP65 rating and robust construction support durable performance in outdoor and harsh environments, and the low 20 mA draw helps preserve battery life on long trips. Not for submersible use, but well-suited for vehicles, boats, and outdoor powersport applications seeking reliable, wireless audio without heavy power penalties.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243154148,"sku":null,"price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/BT-TWO2000x2000_700x_8e784139-5f63-4dc8-b106-b11f44afad57.webp?v=1789261713"},{"product_id":"ds18-g700-2-gen-x-full-range-class-d-2-channel-amplifier-700-watts","title":"DS18 G700.2 GEN-X Full-Range Class D 2-Channel Amplifier 700 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 G700.2 GEN-X Full-Range Class D 2-Channel Amplifier is a compact, high-efficiency power stage designed for demanding two-channel car audio installs, delivering up to 360W bridged at 4 ohms and 2x180W at 2 ohms from a 700W peak rating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Class\u003c\/b\u003e: Digital (D) design for high efficiency and smaller footprint in tight mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Type\u003c\/b\u003e: Full Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of Channels\u003c\/b\u003e: 2CH\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum Impedance\u003c\/b\u003e: 2 ohms, enabling stable operation with tougher speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 4 Ω\u003c\/b\u003e: 2 x 100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 2 Ω\u003c\/b\u003e: 2 x 180W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power (Bridged @ 4 Ω)\u003c\/b\u003e: 1 x 360W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTotal Watts (Peak)\u003c\/b\u003e: 700W\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20Hz–20kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal-to-Noise Ratio\u003c\/b\u003e: \u0026gt;90dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency @ 4 Ω\u003c\/b\u003e: 0.94\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor\u003c\/b\u003e: 78\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 22K\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossovers\u003c\/b\u003e: Selectable LPF\/FLAT\/HPF\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eX-Over Range\u003c\/b\u003e: 50Hz–2kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost\u003c\/b\u003e: 0–12dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost Frequency\u003c\/b\u003e: 45Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInfrasonic Filter\u003c\/b\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhase Selector\u003c\/b\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow-Level Input\u003c\/b\u003e: 0.25–6V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Level Input Compatibility\u003c\/b\u003e: Direct signaling to factory radios\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurface Mount Technology\u003c\/b\u003e: Yes, enables flexible placement and build options\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicators\u003c\/b\u003e: Power \/ Protection \/ Clip\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Input Terminal Size\u003c\/b\u003e: 4ga\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuse Size\u003c\/b\u003e: 2 x 20A\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooling\u003c\/b\u003e: No cooling fan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Color \/ Finish\u003c\/b\u003e: Matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e: Length 8.1\" (205mm); Width 4.72\" (120mm); Height 1.96\" (50mm); Heatsink Length 6.2\" (158mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe G700.2 GEN-X pairs precise 2-channel power delivery with flexible crossover control, allowing you to shape the front stage or bridge for mono use while maintaining reliable protection and clear signal integrity. Its high-level input compatibility simplifies integration with factory radios, and the compact, fanless design helps preserve space in tighter installs without sacrificing performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243186916,"sku":null,"price":155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G700.2D-2000x2000_700x_2aa957f2-9f75-4593-9b05-bdbf8523e14b.jpg?v=1789261714"},{"product_id":"ds18-ampkit8-advance-8-ga-installation-kit-red","title":"DS18 AMPKIT8 Advance 8-GA Installation Kit RED","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 AMPKIT8 Advance 8-GA Installation Kit (SKU AMPKIT8) is a complete 8-gauge CCA wiring bundle for car amplifiers, delivering power, ground, signal, and control wiring in one package for a clean, dependable install.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e8-GA CCA Installation Kit for Car Amplifiers\u003c\/b\u003e: 8-gauge copper-clad aluminum wiring designed to handle typical amplifier current draws while keeping installation flexible and manageable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Cable length and gauge\u003c\/b\u003e: 17 ft Red Power Cable, 8.3 mm² (OD 6.7 mm) for longer runs with solid current capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGround Cable length and gauge\u003c\/b\u003e: 3 ft Black Ground Cable, 8.3 mm² (OD 6.7 mm) for a solid return path in tight install spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eANL Mini-ANL Fuse Holder with Mini-ANL 60A\u003c\/b\u003e: Integrated fuse protection to guard the circuit against overloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwisted RCA Cable\u003c\/b\u003e: 17 ft Red\/Black Twisted RCA Cable for stable, low-noise signal transmission between head unit and amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTurn-On Remote Cable\u003c\/b\u003e: 17 ft Turn-On Remote Cable to reliably cue amplifiers on with the head unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeaker Cable\u003c\/b\u003e: 17 ft Red\/Black Speaker Cable, 0.81 mm² x 2C, OD 2.4 x 4.8 mm for speaker connections with flexible routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8GA Loom Tube\u003c\/b\u003e: 6 ft Loom Tube (Black) to protect and organize wiring paths in the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction and wiring philosophy\u003c\/b\u003e: True gauge wire, heavy-duty hardware, fusing and signal cables designed for long-lasting installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact kit packaging\u003c\/b\u003e: Product Weight 2 lbs; Product Dimensions 7.75 x 7.5 x 2.25 in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDS18 AMPKIT8 is designed to streamline installs by including all necessary components in one package, enabling efficient trunk-to-amp wiring with protection, organized routing, and reliable power delivery for everyday to moderately demanding car audio setups.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243219684,"sku":null,"price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/AMPKIT8BOXLESS2000x2000_700x_9338accb-1973-4614-a98c-d74030d95c6b.webp?v=1789261716"},{"product_id":"ds18-gen-x4500-1d-class-d-1-channel-monoblock-amplifier-4500-watts","title":"DS18 GEN-X4500.1D Class D 1-Channel Monoblock Amplifier 4500 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 GEN-X4500.1D is a Class D monoblock amplifier delivering up to 4500W of power in a compact, install-friendly package, built for enthusiasts who demand serious bass with efficient operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum power output\u003c\/b\u003e: Up to 4500W to provide strong, dynamic bass peaks for high-demand subwoofers and demanding musical transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClass D, monoblock design\u003c\/b\u003e: Efficient single-channel architecture optimized for subwoofer duty, offering better heat management and a smaller footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLightweight with high-efficiency heat sink\u003c\/b\u003e: Easier handling and installation with cooling tuned for sustained bass performance in compact spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFully adjustable crossover controls\u003c\/b\u003e: Fine-tune frequency range to match enclosure and subwoofer behavior, including low-pass operation for focused bass and overall system coherence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow pass filter and bass boost\u003c\/b\u003e: Precisely limit subwoofer top-end and add targeted low-end presence to compensate for enclosure or vehicle acoustics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInternal circuit board and DS18 technologies\u003c\/b\u003e: Designed to maximize power output with efficiency through purpose-built circuitry and quality construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight-up DS18 logo\u003c\/b\u003e: Visual indicator and styling cue that enhances install aesthetics while the unit is powered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency supports multi-amp setups\u003c\/b\u003e: Its optimized efficiency helps accommodate additional amplifiers without requiring an alternator upgrade in many builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis amplifier is ideal for high-power subwoofer installations within larger multi-channel systems. The combination of robust power, flexible tuning, and efficient operation enables tight, impactful bass while integrating smoothly with other amplifiers and vehicle acoustics, all in a compact form factor that fits tighter installs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243252452,"sku":"GEN-X4500.1D","price":413.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GEN-X4500.1D-2000x2000_700x_edf0f3a3-0ea1-4183-89ef-c6de5c5370b1.webp?v=1789261717"},{"product_id":"ds18-gen-x1800-1d-class-d-1-channel-monoblock-amplifier-1800-watts","title":"DS18 GEN-X1800.1D Class D 1-Channel Monoblock Amplifier 1800 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 GEN-X1800.1D is a high-power 1-channel car amplifier delivering up to 1800W MAX, designed for demanding subwoofer setups where compact cooling and reliable performance are essential.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e1-Channel Monoblock configuration\u003c\/b\u003e: A dedicated channel for a subwoofer, enabling focused, high-current delivery for deep bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax power\u003c\/b\u003e: 1800W MAX power on demand for peak musical transients and loud bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS at 1 Ohm\u003c\/b\u003e: 600W RMS at 1 Ohm, providing strong, low-impedance performance suitable for demanding subs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS at 4 Ohms\u003c\/b\u003e: 250W RMS at 4 Ohms, offering a stable output with common subwoofer loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable crossover filters\u003c\/b\u003e: Fully adjustable crossover controls to shape where bass sits in the frequency spectrum and how it blends with other speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass boost range\u003c\/b\u003e: 0–12dB bass boost for extra low-end extension when the listening environment demands it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-efficiency heat sink\u003c\/b\u003e: A heat sink design optimized for cooling under heavy use, helping maintain performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLightweight design\u003c\/b\u003e: Lightweight chassis aids installation in tight spaces while managing heat with the heat sink.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-quality circuit board\u003c\/b\u003e: Ensures signal integrity and reliability under demanding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIlluminated DS18 logo\u003c\/b\u003e: Power indication and system control cue visible on the unit when powered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo secondary\/high-output alternator required\u003c\/b\u003e: Optimized resilience means fewer electrical upgrades and simpler installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real-world build, this amplifier excels as the sole power source for a dedicated subwoofer, delivering 600W RMS at 1 Ohm or 250W RMS at 4 Ohms. The adjustable crossover and bass boost let you tailor depth and focus, pairing with a compatible front-end or midrange setup for cohesive sound. The efficient cooling and lightweight design help sustain listening sessions without thermal distortion, while the absence of a required high-output alternator simplifies installation for a cleaner, more straightforward build. The illuminated logo provides a quick power-status reference at a glance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243481828,"sku":null,"price":251.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GEN-X1800.1D-2000x2000_1_700x_c3af9205-5fdf-4b75-aeba-d4efdc3eb225.webp?v=1789261719"},{"product_id":"ds18-eqx7-high-volt-7-band-equalizer-with-high-level-input-and-auto-turn-on","title":"DS18 EQX7 High Volt 7-Band Equalizer with High Level Input and Auto Turn On","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 EQX7 High Volt 7-Band Equalizer with High Level Input and Auto Turn On is a high-volt, seven-band stereo EQ\/crossover built for enthusiasts who demand precise tonal control and seamless factory integration. It delivers dedicated front, rear, and sub outputs with auto turn-on for easy installation and effortless power-on when connected to the factory radio.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e7-band graphic equalizer\u003c\/b\u003e: Precise tonal adjustment across 50 Hz, 125 Hz, 320 Hz, 750 Hz, 2.2 kHz, 6 kHz, and 16 kHz for targeted sound shaping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBoost\/Cut range\u003c\/b\u003e: ±12 dB on most bands, with ±15 dB available for subwoofer frequencies to push or tame bass and vocal presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree RCA outputs\u003c\/b\u003e: Separate outputs for front, rear, and sub amplifiers, enabling independent level control and routing in a multi-amp setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeparate controls\u003c\/b\u003e: Master volume, sub level, front\/rear fade, and main\/aux input selection for on-dash tuning without reconfiguring the amp layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level Converter\u003c\/b\u003e: Integrated high-level input that provides a low-level RCA output for seamless integration with factory radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAuto Turn-On\u003c\/b\u003e: Automatically powers on when connected to the factory radio source, eliminating manual wiring steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtended frequency response\u003c\/b\u003e: 20 Hz–30 kHz range with 100 dB signal-to-noise ratio for extended detail and low noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTHD and performance\u003c\/b\u003e: THD 0.005% contributes to cleaner amplification of boosted or cut signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput\/Output specs\u003c\/b\u003e: Input sensitivity 50 mV–3 V; input impedance 20 kΩ; output voltage 8 V; output impedance 2 kΩ; headroom 20 dB; stereo separation 82 dB @ 1 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover details\u003c\/b\u003e: Passive LPF crossovers for the subwoofer channel with frequency points at 60\/120 Hz and a 12 dB per octave slope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubwoofer output\u003c\/b\u003e: Yes (9 V) dedicated to driving a powered sub or sub amp with appropriate headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild and finish\u003c\/b\u003e: Metal\/Aluminum housing with satin black finish; blue\/red backlit color selectable for on-dash visibility; gold-plated RCA inputs\/outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting flexibility\u003c\/b\u003e: Includes mounting brackets and can be mounted next to the source unit or discreetly under the dash for easy access to front panel controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions and weight\u003c\/b\u003e: Overall 7\" (178 mm) long, 4.4\" (112 mm) deep, 1.18\" (30 mm) tall; weight 1.5 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote and input\/output features\u003c\/b\u003e: Remote turn-on input\/output support for integrated systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: The EQX7 is tailored for builds requiring clean, configurable tonal shaping across seven bands while maintaining high‑voltage input compatibility for strong, distortion-free signal paths. Its three-output design enables a cohesive front\/rear\/sub amplification strategy, and the Hi-Level converter plus Auto Turn-On simplify integration with factory head units. With a wide 20 Hz–30 kHz range and 100 dB SNR, it delivers detailed highs and controlled lows without adding noise, making it ideal for enthusiasts who want precise soundstage tuning without compromising system reliability.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243514596,"sku":null,"price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EQX7-2000x2000_700x_caafcd08-d8ec-4518-8b6d-998cdc796f54.webp?v=1789261720"},{"product_id":"ds18-ixs12-2d-ixs-shallow-12-subwoofer-1600-watts-dvc-2-ohm","title":"DS18 IXS12.2D IXS Shallow 12\" Subwoofer 1600 Watts DVC 2-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 IXS12.2D is a shallow-mount 12\" car subwoofer delivering 800W RMS \/ 1600W max, engineered for compact enclosures and flexible dual-voice-coil wiring to maximize amplifier compatibility and bass output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 12\" (304.8 mm) — standard large-diaphragm size for deep bass within a compact footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpedance\u003c\/b\u003e: 2+2 ohms (dual 2-Ω voice coils) — offers flexible wiring options and broader amplifier compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Handling\u003c\/b\u003e: 800W RMS \/ 1600W max — supports strong control and dynamic bass performance when paired with a capable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 85 dB (1W\/1m) — indicates efficient conversion of electrical power into sound pressure, aiding higher output with available amp power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20–600 Hz — covers deep bass and low-midrange for detailed, impactful low-end reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShallow Mount Design\u003c\/b\u003e — fits in compact spaces and, with a displacement of 0.93 L, requires less enclosure volume than subs of similar size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil \u0026amp; Construction\u003c\/b\u003e: 2.5\" (63.5 mm) voice coil with aluminum former and copper windings; ferrite magnet; aluminum basket; paper cone; fiberglass dust cap; stitched rubber surround — combines power handling with rigid, heat-friendly construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnclosure Recommendation\u003c\/b\u003e: Sealed internal volume (minimum) 28 L \/ 1 ft³; F3 approximately 40 Hz — optimized for tight, controlled bass in sealed boxes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, the IXS12.2D excels in sealed, space-constrained installations where sound quality and bass impact matter more than enclosure size. Its dual-voice-coil arrangement provides wiring flexibility to suit a range of amplifiers, while the shallow depth enables integration under seats, behind panels, or in trunks with limited mounting depth. The combination of a 12\" cone, ferrite magnet, and aluminum basket delivers sturdy, repeatable performance with clear low-end extension and reliable thermal handling at higher output levels.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243580132,"sku":null,"price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/IXS10.4D-FRONT_700x_1c21d7f8-3d5f-4d1e-96d2-667f1da0ea1a.jpg?v=1789261722"},{"product_id":"ds18-g6-5xc-gen-x-6-5-2-way-component-speaker-system-150-watts-4-ohm","title":"DS18 G6.5XC GEN-X 6.5\" 2-Way Component Speaker System 150 Watts 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 G6.5XC GEN-X 6.5\" 2-Way Component Speaker System is a 4-ohm, two-way component set that pairs a 6.5-inch woofer with a silk-dome tweeter and a two-way passive crossover for clean, extended sound in a compact install.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — fits common door panels and aftermarket housings, providing solid midbass presence without overhang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — a standard load for many car amplifiers, balancing efficiency and amplifier compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 325 Watts — indicate continuous power tolerance for steady listening without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling\u003c\/b\u003e: 150 Watts — peak power the system is stated to handle, guiding amp headroom and protection considerations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity (1W\/1m)\u003c\/b\u003e: 86 dB — efficiency measure that helps estimate how loud the system will play with a given amplifier wattage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 35 Hz – 20 kHz — broad range from deep bass to high treble for a full-range component presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 60 Hz — guidance to set the high-pass filter to protect the woofer from subsonic energy in typical installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of Ways\u003c\/b\u003e: 2 — two-driver arrangement with dedicated woofer and tweeter for clearer midrange and smoother highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrill Included\u003c\/b\u003e: Yes — provides protective, finished aesthetics in standard installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWoofer Construction\u003c\/b\u003e: 6.5\" Paper Cone with Rubber Surround; 1\" Voice Coil; Barium Ferrite magnet — paper cone yields natural warmth with controlled bass, while the rubber surround supports durable excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTweeter Construction\u003c\/b\u003e: Silk Dome; 1\" Voice Coil; Neodymium Magnet — delivers smooth high-frequency extension with compact magnet design for in-car performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover Type\u003c\/b\u003e: Passive 2-Way; Crossover Point 3.5 kHz; 12 dB\/Oct; Capacitor: Metal Film; Inductor; Housing Material: ABS; Terminal Type: Screw — integrated network that separates frequencies between woofer and tweeter for balanced in-car sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover Power Handling\u003c\/b\u003e: 400W — the passive crossover is specified to accommodate higher input levels, offering headroom in capable setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHousing Material\u003c\/b\u003e: ABS — rigid construction suitable for mounting in doors or dash applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a typical car audio build, the DS18 G6.5XC GEN-X serves as a front-stage component pair that delivers punchy bass and articulate highs from a compact 6.5-inch chassis. The 4-ohm load pairs well with a range of aftermarket amplifiers, while the 2-way crossover ensures the woofer and tweeter operate within their optimal band, reducing distortion and smoothing overlap around 3.5 kHz. The silk-dome tweeter provides refined treble, and the paper-cone woofer contributes warm midbass with controlled excursion from its rubber surround. With an included grill and ABS enclosure, it mounts cleanly in standard installations while maintaining protection and durability.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243678436,"sku":null,"price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G6.5XC-2000x2000_700x_d21b051c-10e1-4779-8d80-f94699c651c5.webp?v=1789261724"},{"product_id":"ds18-g1000-4d-gen-x-full-range-class-d-4-channel-amplifier-1000-watts","title":"DS18 G1000.4D GEN-X Full-Range Class D 4-Channel Amplifier 1000 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 G1000.4D GEN-X is a 1000W peak, four-channel Full-Range Class D amplifier built for serious car audio systems that demand precise tuning and flexible installation. Its digital (D) topology and adjustable crossovers put professional-grade control in your hands while maintaining efficient, compact performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Class\u003c\/b\u003e: Digital (D) design for efficient, multi-channel power with a slim footprint ideal for tight installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChannels\u003c\/b\u003e: 4 Channel Full Range, enabling independent front\/rear channel amplification or flexible configurations in a single chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Output\u003c\/b\u003e: 4 x 90W RMS @ 4Ω, 4 x 150W RMS @ 2Ω, and 2 x 300W @ 4Ω (bridged). This gives you clean four-channel performance or the option to bridge two channels for a dedicated sub, depending on impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20Hz–20kHz, ensuring the full audible spectrum is reproduced with consistent level across the amp’s range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal-to-Noise\u003c\/b\u003e: \u0026gt;90dB, contributing to a quiet background so micro-details remain clear in busy musical passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency\u003c\/b\u003e: 0.92 at 4Ω, indicating low heat generation for a given output level and more usable power in real-world installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor\u003c\/b\u003e: 78, helping control speaker motion for tighter bass and more articulate transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInputs\u003c\/b\u003e: High-Level Input Yes; Low Level Input Range 0.25–6 V; Input Impedance 22K. Broad compatibility with factory radios and line-level sources, plus predictable sensitivity for precise tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover\u003c\/b\u003e: Selectable LPF\/FLAT\/HPF with Range 50Hz–2kHz to tailor each channel’s frequency band to your speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection \u0026amp; Indicators\u003c\/b\u003e: Thermal, Over-Load, DC Output, Short Circuit Output, Voltage Input, Clipping protections; LEDs for Power, Protection, and Clip give instant status feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical\u003c\/b\u003e: 8.1\" L × 4.72\" W × 1.96\" H; Heatsink length 6.2\"; Matte Black finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower \u0026amp; Build\u003c\/b\u003e: Power Input Terminal Size 4 GA; Fuse Size 2 × 25A; Surface Mount Component Technology supports precise, reliable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 1.2 kg, aiding installation in compact spaces without sacrificing rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a typical build, the G1000.4D powers multiple channels with clean, controlled output and flexible crossovers while maintaining safe operation through comprehensive protection and clear status indicators. Its high-level input compatibility and bridge-capable power options make it a versatile choice for enthusiast systems seeking precise tuning and reliable performance in a compact package.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243711204,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/G1000.4D-2000x2000_1_700x_83af5b9b-9d06-4fc9-bc71-f0b3817c56d9.jpg?v=1789261725"},{"product_id":"ds18-exl-x8-4d-exl-x-8-subwoofer-1200-watts-dvc-4-ohms","title":"DS18 EXL-X8.4D EXL-X 8\" Subwoofer 1200 Watts Dvc 4-Ohms","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 EXL-X8.4D is an 8-inch car subwoofer with dual 4-ohm voice coils and a 1200W peak rating, built for high-performance installations that demand tight, deep bass. It thrives in both sealed and ported enclosures and offers flexible wiring to match your amplifier setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 8\" (203.2mm) — An 8-inch footprint that fits a wide range of enclosures while delivering substantial cone area for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4+4 ohms — Dual 4-ohm coils provide wiring flexibility to achieve the desired load for your amp and enclosure configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 600W — Continuous power rating for steady bass performance with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 1200W — Peak capability for brief power demands without damage when used with appropriate equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 89dB (1W\/1m) — Indicates how efficiently the driver converts power into audible sound at a standard distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 38Hz–1kHz — Extends into deep bass and integrates with mid-bass ranges for cohesive low-end performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2.5\" (63.5mm) — Large coil aids heat dissipation and control under high-power conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Black Aluminum — Provides structural rigidity and thermal handling for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWinding Material\u003c\/b\u003e: SV — Winding material chosen for electrical damping and heat management under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiaphragm Material\u003c\/b\u003e: Non-Pressed Paper + Glass Fiber — Combines stiffness and light weight for accurate bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDust Cap Material\u003c\/b\u003e: Fiberglass — Adds rigidity to the cone assembly and protects the voice coil area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Foam — Supports controlled excursion and durable movement in various enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum — Rigid chassis helps minimize unwanted resonances; \u003cb\u003eBasket Color\/Finish\u003c\/b\u003e: Glossy Red for a distinctive look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite — Provides a robust magnetic structure suitable for high SPL in car environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 130 oz — Substantial mass contributing to mechanical stability and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Enclosures\u003c\/b\u003e: Sealed Internal Volume 0.3 ft³; Ported Internal Volume 0.5 ft³; Port Size 1\" x 8\" x 10.56\" (W x H x L); Port Tuning Frequency 55 Hz — Sealed boxes deliver tight, accurate bass; ported boxes extend lower, with a tuned frequency around 55 Hz for deeper output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMeasurements\u003c\/b\u003e: Overall Diameter 8.58\" (218mm); Overall Depth 6.61\" (168mm); Front Mount Baffle Cutout 7.36\" (187mm); Mounting Depth 5.51\" (140mm) — Installation footprint details to assess fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe EXL-X8.4D is designed to deliver powerful, precise bass in real-world car installations, with dual 4-ohm coils offering wiring flexibility and a robust ferrite magnet for reliable performance. It accommodates both sealed and ported configurations, letting you tailor bass extension and punch to your vehicle and audio goals.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243743972,"sku":null,"price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EXL-X8.2D-FRONT_700x_11ed5f0f-9690-46a0-abb3-635e3d1324b4.jpg?v=1789261727"},{"product_id":"ds18-ampkit4-advance-4-ga-installation-kit-red","title":"DS18 AMPKIT4 Advance 4-GA Installation Kit RED","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 AMPKIT4 Advance 4GA Installation Kit RED is a complete power, ground, and signal wiring bundle built for car audio amplifiers—delivering a clean, professional install with protected, high-current wiring.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMini-ANL Fuse Holder with 120A\u003c\/b\u003e: Provides overcurrent protection for the power path, helping safeguard your amp and wiring during installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6 ft. 4GA Loom Tube\u003c\/b\u003e: Shields and organizes heavy power and ground runs, reducing chafing and making routing easier in tight engine bays or trunks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack Ground Cable: 3 ft, 21mm² (OD 10mm)\u003c\/b\u003e: Short, high-capacity ground run designed to minimize impedance and voltage drop back to the chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRed Power Cable: 17 ft, 21mm² (OD 10mm)\u003c\/b\u003e: Primary battery-to-amp power lead with ample length for common vehicle layouts and a high-current cross-section for reduced resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwisted RCA Cable: 17 ft, Red\/Black\u003c\/b\u003e: Signal path designed to resist electrical interference and preserve audio clarity over a full-length run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTurn-On Remote Cable: 17 ft\u003c\/b\u003e: Enables reliable amplifier turn-on control with flexible routing across the vehicle interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRed\/Black Speaker Cable: 17 ft, 1.31mm² x 2C, OD 3.2 x 6.4mm\u003c\/b\u003e: Dual-conductor speaker wiring for amp outputs, sized for adequate current and straightforward installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight\u003c\/b\u003e: 3 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Dimensions\u003c\/b\u003e: 7.75 x 7.75 x 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit uses cables engineered to deliver maximum power transfer and minimize signal loss, supporting your amplifier’s performance with durable protection and organized routing—perfect for a clean, reliable high-current installation in a typical car audio build.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243776740,"sku":null,"price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/AMPKIT4-2000x2000_700x_7b75ccf3-a00c-4b93-b8f2-c83addd474af.webp?v=1789261729"},{"product_id":"ds18-6oct300-8-octagonal-6-mid-bass-loudspeaker-300-watts-rms-8-ohm","title":"DS18 6OCT300-8 Octagonal 6\" Mid-Bass Loudspeaker 300 Watts Rms 8-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 6OCT300-8 Octagonal 6.5” Mid-Range Loudspeaker is built for serious car audio builds that demand wide bandwidth and precise imaging. Its octagonal frame and 80 Hz–10 kHz response deliver a tangible soundstage with 95 dB sensitivity and robust power handling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" (165 mm) cone fits standard 6.5\" openings; octagonal shape aids alignment and dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 8 OHMS — compatible with a wide range of amplifiers and crossovers without excessive load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 300 Watts — sustained power capability to reproduce dynamic music without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 600 Watts — handles brief high-power peaks without clipping when driven by suitable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 95 dB (1W\/1m) — high efficiency for louder output with less power, improving perceived volume in real-world installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 80 Hz–10 kHz — extends from low bass regions into the upper midrange, aiding a cohesive mid\/high presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 120 Hz — helps protect the midrange from sub-bass, preserving clarity and reducing distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2\" \/ 50.8 mm — larger coil area supports better heat dissipation during demanding passages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: TIL; \u003cb\u003eWinding Material\u003c\/b\u003e: CCAW; \u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum — rugged construction tailored for reliable performance in automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 6.5 lbs — compact mid-range driver that remains manageable for mounting in typical door or kick-panel spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMechanical Dimensions\u003c\/b\u003e: Front Mount Cutout 5.8\" \/ 148 mm; Mounting Depth 3.4\" \/ 87 mm; Overall Diameter 6.6\" \/ 170 mm — practical for tight installations with predictable mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThiele–Small Parameters\u003c\/b\u003e: Vas 9.55 L; Xmax 4 mm; Fs 120 Hz; Qms 5.975; Qes 0.999; Qts 0.855; Re 5.87 Ω — detailed electrical characteristics for precise enclosure and crossover design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith 8-ohm impedance and 300 W RMS handling, it pairs well with high-quality amplifiers in a two-way front stage, offering headroom for dynamic music while minimizing distortion. The 80 Hz–10 kHz range provides solid mid-range presence and vocal clarity, making it suitable as a component mid-range in a tuned system or as an upgrade for enthusiasts seeking wider bandwidth and improved imaging. The octagonal design, combined with a manageable mounting depth and cutout size, facilitates accurate alignment and easy installation in doors or kick panels, delivering a more focused and natural soundstage in the vehicle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243809508,"sku":null,"price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6OCT300-8-FRONT_700x_2dd43503-1c39-4f5d-8dbe-19e3b0ca0781.jpg?v=1789261730"},{"product_id":"ds18-dsp4-8btm-4-channel-in-and-8-channel-out-digital-sound-processor-with-bluetooth-and-lcd-screen","title":"DS18 DSP4.8BTM 4-Channel In and 8-Channel Out Digital Sound Processor with Bluetooth and LCD Screen","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 DSP4.8BTM is a 4-channel in and 8-channel out digital sound processor with Bluetooth control, built for enthusiasts who demand precise, surgical tuning and flexible routing in a car audio system. It pairs extensive onboard DSP with a mobile app workflow to tailor your soundstage with high fidelity and repeatable presets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e4-Channel In \/ 8-Channel Out\u003c\/b\u003e: Processes four input signals and delivers eight processed outputs, enabling complex multi-amp or surround-style deployments with individually tuned channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBluetooth Interface + App\u003c\/b\u003e: Directly access filtration settings via Bluetooth and tune using the DS18 DSP4.8BTM App (available on the App Store and Google Play) to monitor, adjust, and save presets for specific songs or genres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8 Independent Parametric EQ Bands per Channel\u003c\/b\u003e: Each channel offers eight parametric bands for targeted tonal shaping, with flexible gain and Q control to sculpt precise frequency regions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e8-Band Channel Equalizer\u003c\/b\u003e: Overall 8 parametric bands per channel with gain from -12 to +12 dB and Q factor from 0.6 to 9.9, enabling surgical adjustments across the spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDynamic Crossover Filters\u003c\/b\u003e: Tailor the speaker crossover with Butterworth, Linkwitz-Riley, and Bessel filter types for accurate slope and phase behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAttenuation and Crossover Slopes\u003c\/b\u003e: Choose 6\/12\/18\/24\/36\/48 dB per octave slopes to match speaker characteristics and system goals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRouting Options\u003c\/b\u003e: Flexible routing with A \/ B \/ C \/ D and combinations (A+B, A+C, B+C) to fit diverse signal paths and amplifier layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTime Alignment \/ Delay\u003c\/b\u003e: Time-align your speakers with 0–18.95 ms of delay and 0–6500 mm distance, improving imaging and stage cohesion in real vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhase and Levels\u003c\/b\u003e: Phase inversion options (0° or 180°) and precise input\/output level control with clean impedance handling for stable integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput\/Output Specs\u003c\/b\u003e: Input channels 4 (RCA, electronically symmetrical); max input level 4.00 Vrms (+14 dBu); input impedance 100 kΩ. Output channels 8 (RCA, electronically symmetrical); max output level 3.50 Vrms (+13 dBu); output impedance 100 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDSP Performance\u003c\/b\u003e: Frequency response 10 Hz–24 kHz (-1 dB); THD+N \u0026lt; 0.01%; signal latency \u0026lt; 0.6 ms; bit rate 32-bit; sampling frequency 96 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower and Form Factor\u003c\/b\u003e: DC power supply 10–15 V; max current 300 mA. Device dimensions 5.6\" × 4.25\" × 1.6\"; weight 277 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMemory and Configuration\u003c\/b\u003e: Three memories available for quick recall of preferred setups, enabling fast scene changes with presets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a typical install, the DSP4.8BTM acts as the central digital signal processing hub, translating your source to eight finely tuned outputs across multiple amplifiers. Its high-resolution 96 kHz processing, ultra-low latency, and comprehensive EQ, crossover, and time-alignment features empower precise imaging and tonal balance in challenging listening environments. The combination of Bluetooth tuning, app-based preset management, and configurable routing makes it ideal for advanced custom builds where repeatable, studio-grade tuning is a priority.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243842276,"sku":null,"price":275.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DSP4.8BTM-2000x2000_700x_3a722965-a78d-4526-98f9-d26720e9fb7d.webp?v=1789261732"},{"product_id":"ds18-ixs12-4d-ixs-shallow-12-subwoofer-1600-watts-dvc-4-ohm","title":"DS18 IXS12.4D IXS Shallow 12\" Subwoofer 1600 Watts DVC 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 IXS12.4D is a shallow-mount 12-inch subwoofer with dual 4-ohm voice coils, delivering 800W RMS and 1600W max for high-impact bass in tight install spaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDual 4-Ohm Voice Coils (4+4 Ω)\u003c\/b\u003e: Enables flexible wiring options to match a wide range of amplifiers, with series\/parallel configurations for different impedance needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 800W continuous power, providing steady, reliable bass when driven by an appropriate amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 1600W peak, allowing brief dynamic bursts without clipping when demanded by the music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20 Hz – 600 Hz, covering deep bass fundamentals up through lower midrange, enabling impactful low-end presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 85 dB (1W\/1m), indicating efficient conversion of electrical power into sound for strong output at moderate amp levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShallow Mount \/ Compact Enclosure Fit\u003c\/b\u003e: Designed to fit in tight spaces while requiring less box volume, expanding installation options without sacrificing bass impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: 12\" nominal diameter; Voice Coil Diameter 2.5\" (63.5 mm); Cone Material: Paper; Dust Cap Material: Fiberglass; Surround: Stitched Rubber; Basket: Aluminum; Magnet: Ferrite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Enclosures\u003c\/b\u003e: Sealed internal volume 28 L (1 ft³) with F3 around 40 Hz for predictable low-end performance in compact enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement\u003c\/b\u003e: 0.93 L \/ 0.033 ft³, indicating the amount of air the woofer can move under load in a sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThiele \u0026amp; Small Parameters\u003c\/b\u003e: Vas 37.3 L; Fs 33 Hz; Qms 4.034; Qes 0.861; Qts 0.71; Mms 184 g; Cms 104 mm\/N; Le 7.07 mH; Diaphragm Area Sd 494.81 cm²; Re 3.6+3.6 Ω.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car audio build, the IXS12.4D excels in sealed enclosures around 28 L, delivering defined bass down to the low end of the spectrum with precise control. The shallow design and dual voice coils provide installation flexibility and amplifier compatibility, making it well-suited for tight-footprint installations under seats, in trunk walls, or other confined spaces where deep, impactful bass is still required.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243875044,"sku":null,"price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/IXS10.4D-FRONT_700x_78b901d6-8dcb-4394-a05d-1023b2fcc806.jpg?v=1789261734"},{"product_id":"ds18-ion700-2d-compact-full-range-class-d-2-channel-stereo-amplifier-700-watts-rms","title":"DS18 ION700.2D Compact Full-Range Class D 2-Channel Stereo Amplifier 700 Watts RMS","description":"\u003cdiv\u003e\n\u003cp\u003eDelivering 700W RMS when bridged at 4 ohms in a compact, full-range digital design, the DS18 ION700.2D is built for high-performance installs where space is at a premium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power (Bridge) 4 Ohm\u003c\/b\u003e: 700W; enables a strong, single-channel drive when you bridge the two channels for a sub or dedicated bass path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power (2 Ohm) 2 Channel\u003c\/b\u003e: 2 x 350W; each channel can push 350W into a 2-ohm load, ideal for a robust front-stage or midrange amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power (4 Ohm) 2 Channel\u003c\/b\u003e: 2 x 240W; provides ample power for stereo channels at 4 ohms with good headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTotal Peak Power\u003c\/b\u003e: 2100W; a measure of the amp’s instantaneous capability across the full system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 10Hz–20kHz; ensures coverage from deep bass to crisp highs for a full-range presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal-to-Noise Ratio\u003c\/b\u003e: \u0026gt;95dB; low noise floor contributes to cleaner audio with less hiss and hum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency (4 Ohm)\u003c\/b\u003e: 88%; high efficiency supports cooler operation and reduced electrical load in daily driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor\u003c\/b\u003e: 210; helps control speaker cone movement, improving bass definition and transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 27Kohm; high input impedance reduces loading on source units for clearer signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChannel Separation\u003c\/b\u003e: 59dB; minimizes crosstalk between channels for more precise stereo imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTHD\u003c\/b\u003e: 0.01%; low distortion contributes to cleaner, more accurate sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost\u003c\/b\u003e: 0–12dB at 45Hz; adds controllable bass presence without muddying fundamentals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossovers\u003c\/b\u003e: LPF\/HPF\/FULL, 40Hz–2kHz; tailor output to sub, front, or full-range, reducing frequency overlap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost Frequency\u003c\/b\u003e: 45Hz; precise boost point aligns with typical sub-bass content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes; makes quick level matching convenient from the seating position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level Inputs\u003c\/b\u003e: Yes; facilitates integration with factory or aftermarket head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTiffany RCA Terminals\u003c\/b\u003e: Yes; high-quality signal connectors for reliable, low-resistance transfers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicators\u003c\/b\u003e: Power \/ Protect \/ Clipping; at-a-glance status for quick diagnostics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection \u0026amp; Safety\u003c\/b\u003e: Thermal, Over-Load, DC Offset, DC Output, Short Circuit, Voltage, Clipping protections; protects both amp and speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Input \u0026amp; Fusing\u003c\/b\u003e: 4 AWG terminal; 60A external fuse; solid power delivery with external protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Aluminum chassis with Black\/Silver finish; durable, heat-dissipating enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e: 6.14\" L × 4.72\" W × 2\" H; compact footprint suited to tight installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeatsink\u003c\/b\u003e: 4.84\" heatsink length; supports passive cooling without a fan for quiet operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 0.75 kg; lightweight for its power class and easy mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real-world build, the ION700.2D fits behind a dash panel or under a seat while delivering substantial bridge-grade power or dual-channel output for a refined front stage. The combination of Hi-Level inputs, Tiffany RCA terminals, remote level control, and comprehensive protection keeps installation flexible, responsive, and reliable across varied automotive environments. A moisture-resistant coating on the PCB enhances longevity in humid or damp conditions, while the absence of a cooling fan reduces noise, letting you hear the music rather than the hardware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243907812,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/ion700.2d-last-2023_700x_4b11b4df-d1f5-4f56-aeb4-7bd926b7f6a3.webp?v=1789261735"},{"product_id":"ds18-gtx1-3-die-cast-compression-neodymium-super-bullet-tweeter-240-watts-1-titanium-4-ohm-vc","title":"DS18 GTX1 3\" Die Cast  Compression Neodymium Super Bullet Tweeter 240 Watts 1\" Titanium 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 GTX1 is a 3-inch die-cast compression neodymium super bullet tweeter built for car audio enthusiasts who demand precise, extended highs in compact installations. It combines a titanium diaphragm, a 1\" voice coil on a Kapton former, a neodymium magnet, and a rugged aluminum housing to deliver detailed high-frequency performance up to 20 kHz with a 98 dB sensitivity and a 240W peak rating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 3\" — defines the driver’s basic size and helps determine fitment in tighter spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — compatibility with common amplifiers and crossover networks; affects how much current the tweeter draws from an amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAES Power Handling\u003c\/b\u003e: 60W — continuous (RMS) power the tweeter can handle, important for reliable long-term performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProgram Power Handling\u003c\/b\u003e: 120W — higher power allowance for short-duration musical transients without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePeak Power Handling\u003c\/b\u003e: 240W — maximum instantaneous power the tweeter can tolerate during peak transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 98 dB (1W\/1m) — how efficiently the tweeter converts input power to sound pressure at a fixed distance, influencing required amplifier headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 3 kHz – 20 kHz — range over which the tweeter accurately reproduces high-frequency content, from upper mids to ultrasonic treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 3 kHz — suggested crossover point to protect the tweeter while preserving high-frequency clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1\" \/ 25.4 mm — size of the coil that converts electrical energy to mechanical motion, influencing heat dissipation and dynamics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Kapton — durable, heat-resistant base for the voice coil under high-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiaphragm Material\u003c\/b\u003e: Titanium — rigid, lightweight diaphragm designed for crisp, detailed high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Neodymium — provides strong magnetic flux in a compact form, aiding efficiency and mounting flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Material\u003c\/b\u003e: Aluminum — rigid, die-cast housing that supports consistent performance and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Diameter\u003c\/b\u003e: 2.95\" \/ 75 mm — physical footprint important for enclosure and mounting planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Depth\u003c\/b\u003e: 1.96\" \/ 49.9 mm — depth required behind mounting surface, relevant to dash, door, or pillar installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront Mount Baffle Cutout\u003c\/b\u003e: 2.26\" \/ 57.3 mm — required cutout diameter for flush mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Depth\u003c\/b\u003e: 1.46\" \/ 37 mm — space needed behind the mounting surface for proper installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight\u003c\/b\u003e: 1 lb — compact, lightweight design that complements tight installation layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn car audio builds, GTX1 is designed to mount wherever space allows, providing an articulate high-frequency extension without demanding excessive enclosure real estate. The combination of a neodymium magnet, titanium diaphragm, and aluminum housing delivers precise highs with durable, compact construction suitable for sophisticated component or custom installs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243940580,"sku":null,"price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GTX12000x2000_700x_75dcb66a-44ec-442f-ae5d-0db86c169d94.webp?v=1789261736"},{"product_id":"ds18-frp-2-5k-ti-frp-compact-full-range-class-d-1-channel-amplifier-2-500-watts-rms-1-ohm-titanium","title":"DS18 FRP-2.5K\/TI FRP Compact Full-Range Class D 1-Channel Amplifier 2,500 Watts Rms @ 1-Ohm TITANIUM","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 FRP-2.5K\/TI is a compact, full-range mono amplifier delivering 2,500W RMS at 1 ohm, engineered to power DS18 FRP-2.5K installations in tight spaces. Its micro digital design, moisture-protective PCB coating, and vibration-damped construction ensure high power delivery remains reliable in harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 4 ohms\u003c\/b\u003e: 700W — Steady output into a 4Ω load keeps efficiency high while preserving clarity with lighter speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 2 ohms\u003c\/b\u003e: 1300W — Higher current capability translates to more dynamic peak impact and midbass presence with a 2Ω setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 1 ohm\u003c\/b\u003e: 2500W — Maximum continuous power for demanding bass or full-range sections when a single channel drives a low-impedance load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power @ 1 ohm (Burst)\u003c\/b\u003e: 2800W — Short-term power headroom to handle transient peaks without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 10Hz–20kHz — Extends from rumbling lows to clean highs, suitable for full-range performance in a mono configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal to Noise Ratio\u003c\/b\u003e: 83dB — Higher ratio reduces audible noise, contributing to clearer quiet passages in music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency @ 4 ohms\u003c\/b\u003e: 85.6% — High efficiency minimizes heat under typical operating conditions, aiding performance in compact enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor\u003c\/b\u003e: 90 — Indicates good control of speaker motion, improving transient response and bass articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 10KΩ — Compatible with a wide range of source devices, helping preserve signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTotal Harmonic Distortion\u003c\/b\u003e: 0.5% — Low distortion contributes to cleaner output at high output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eX-Over\u003c\/b\u003e: Fixed Band-Pass; HP 10Hz–2kHz, LP 40Hz–20kHz — Provides defined bandwidth control to tailor the amp’s output for bass, mids, or highs within a fixed range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost\u003c\/b\u003e: 0–12dB at 50Hz — Allows targeted bass emphasis to tastefully enhance low-end presence without overhang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChannels\u003c\/b\u003e: 1CH (Monoblock) — Dedicated single-channel operation for high-power, streamlined installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMin Impedance\u003c\/b\u003e: 1Ω — Capable of driving very low-impedance loads when paired with appropriate speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicators\u003c\/b\u003e: Power \/ Protect \/ Clipping — Quick visual status of operation and protection states.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes (Volmeter Optional) — Fine-tune output from the seat; Volmeter option adds voltage monitoring capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooling\u003c\/b\u003e: Smart Cooling x 2 — Dual fans manage thermal performance to sustain output during long sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtections\u003c\/b\u003e: Thermal, Over-Load, Short Circuit Output, DC Output Protection, Voltage Input Protection, Clipping Protection — Comprehensive safeguards to protect amp and vehicle electricals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTiffany RCA Terminals\u003c\/b\u003e — Premium, low-resistance connections for reliable signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Color \/ Finish\u003c\/b\u003e: Titanium (also blue and red options) — Aesthetically compatible with multiple build\/themes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Input Terminal Size\u003c\/b\u003e: 0GA — Heavy-gauge input for robust power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuse Size\u003c\/b\u003e: 200A — High-current protection aligned with its power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e: 8.85\" L x 5.5\" W x 2.36\" H; Heatsink Length 7.6\" — Compact footprint designed for easy installation in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 2.1 kg — Lightweight for a high-power monoblock, aiding installation flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePCB \/ Construction\u003c\/b\u003e: Protective coating to prevent moisture corrosion; bonded components for extra vibration protection — Built to endure challenging environments and dynamic vehicle conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, this amplifier pairs with DS18 FRP-2.5K drivers to deliver solid, high-power mono performance in a compact chassis. The combination of robust protections, dual cooling, and a programmable yet fixed-bandwidth crossover helps you place a clean, articulate bass foundation or a precise full-range output in tight trunks or under-seat spaces, with monitoring options and color choices to fit your install aesthetic.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243973348,"sku":null,"price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/FRP-2.5K-TI-2000x2000_700x_266e33e7-0929-4f50-bbb3-e7d33d4b89d6.webp?v=1789261738"},{"product_id":"ds18-exl-x6-4d-exl-x-6-5-subwoofer-800-watts-dvc-4-ohms","title":"DS18 EXL-X6.4D EXL-X 6.5\" Subwoofer 800 Watts Dvc 4-Ohms","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 EXL-X6.4D is a 6.5-inch dual 4-ohm subwoofer rated to 800W max, built for competition-grade bass with tight control and punch. A red aluminum basket, fiberglass dust cap, and DS18’s dustpan design emphasize a rugged, performance-focused build designed to excel under demanding installs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165.1mm — fits standard 6.5\" openings while delivering substantial bass authority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4+4 ohms — dual 4-ohm voice coils provide wiring flexibility for amplifier and system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 400W — continuous power rating suitable for sustained bass without excessive thermal stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 800W — peak capability for dynamic musical transients and loud peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 89.8dB (1W\/1m) — moderate efficiency that benefits from a capable amplifier to reach higher SPL with controlled power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 40-820Hz — enables bass down to 40 Hz with upper-range extension into the low midrange for musical versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2\" \/ 50.8mm — larger coil aids heat dissipation and supports high excursion under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Black Aluminum — improves heat management and structural rigidity under heavy use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Non-Pressed Paper + Glass Fiber — combination of damping and stiffness for controlled bass articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDust Cap Material\u003c\/b\u003e: PPI — protective center cap that adds rigidity and guards the voice coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Foam — flexible surround to support smooth, linear cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum — rigid frame that minimizes flex and preserves alignment during high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite — solid core for dependable motor strength and consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 90 oz — substantial motor and cone assembly contributing to bass authority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnclosure Compatibility\u003c\/b\u003e: Performs in sealed and ported enclosures for versatile install options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Enclosures\u003c\/b\u003e: Sealed internal volume 0.2 ft3; Ported internal volume 0.3 ft3; Port tuning 60 Hz; Ported box output 48 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical Dimensions\u003c\/b\u003e: Overall Diameter 6.92\" \/ 176mm; Overall Depth 5.15\" \/ 131mm; Front Mount Baffle Cutout 5.78\" \/ 147mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDustpan Design\u003c\/b\u003e: Specially designed dustpan feature to maximize bass output and maintain reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAesthetic\/Build Detail\u003c\/b\u003e: Private red aluminum basket adds unique DS18 styling while providing a solid foundation for durable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car install, the EXL-X6.4D adapts to your space and goals: sealed enclosures around 0.2 ft3 yield tight, punchy bass from a compact footprint, while a 0.3 ft3 ported option with a 60 Hz tuning delivers deeper, louder bass when trunk space permits. Its dual 4-ohm coils and robust motor assembly make it a versatile choice for amps matched to either 2-ohm or 4-ohm configurations, enabling confident integration into aggressive front-stage or rear-fill setups. The combination of ferrite magnet, aluminum basket, and reinforced dust-cap design provides reliable power handling and consistent performance across long listening sessions. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244006116,"sku":null,"price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EXL-X6.4D-FRONT_700x_e7b8501c-2084-434b-8809-f47515a4353d.jpg?v=1789261740"},{"product_id":"ds18-exl-x12-4d-exl-x-12-subwoofer-2500-watts-dvc-4-ohms","title":"DS18 EXL-X12.4D EXL-X 12\" Subwoofer 2500 Watts Dvc 4-Ohms","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 EXL-X12.4D is a 12\" dual-voice-coil subwoofer designed for competition-grade bass, delivering up to 2500W peak and 1250W RMS for powerful, precise low-end in demanding car installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 12\" \/ 304.8mm — large cone area to move air and produce deep bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4+4 ohms — dual 4-ohm coils offering flexible wiring options for different amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 1250W — sustained power rating for consistent control and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling\u003c\/b\u003e: 2500W — peak capability to handle short, high-demand bass transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 88dB (1w\/1m) — how efficiently the sub converts electrical power to acoustic output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 30Hz-1.7kHz — extends deep into sub-bass while maintaining clarity up to higher bass frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2.57\" \/ 65.2mm — larger coil supports high power handling and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Black Aluminum — robust form to endure high excursion and heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Non-Pressed Paper + Glass fiber — a balance of stiffness and lightness for accurate bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDust Cap Material\u003c\/b\u003e: PPI — helps protect the motor and voice coil from debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Foam — designed for flexible excursion and durability under high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum — rigid frame that aids heat dissipation and structural integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Color\/Finish\u003c\/b\u003e: Glossy Red — distinctive DS18 styling for visible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite — provides the magnetic strength necessary for high-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 2 x 105 oz — dual magnet configuration contributing to mass and excursion control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement Volume\u003c\/b\u003e: 3L \/ 0.105 ft3 — internal volume affecting enclosure design and bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Enclosures (Ported)\u003c\/b\u003e: Internal Volume 36L \/ 1.27 ft3 — tailored for ported bass with solid low-end extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePort Size\u003c\/b\u003e: 1.89\" x 12.28\" x 13.8\" \/ 48.1 x 312 x 351mm — dimensions for proper enclosure ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePort Tuning Frequency\u003c\/b\u003e: 50Hz — enclosure tuning that shapes low-end response in ported designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePorted Box Output Response\u003c\/b\u003e: 42Hz — performance figure indicating ported configuration behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Diameter\u003c\/b\u003e: 12.6\" \/ 321mm — physical footprint to plan mounting and fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Depth\u003c\/b\u003e: 8.14\" \/ 207mm — mounting depth for installation clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFree Air Resonance\u003c\/b\u003e: 56Hz — natural resonance that informs enclosure design and integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a car audio build, this subwoofer shines in both sealed and ported configurations, with a ported recommendation of 36L for strong low-end extension. Its dual 4-ohm coils offer wiring flexibility to match a variety of amplifiers, while the ferrite magnets and aluminum basket provide durability under high-power conditions. The 30 Hz floor and 1.7 kHz upper range enable deep, punchy bass that remains articulate, making the EXL-X12.4D a capable centerpiece for high-performance systems requiring precise bass control and substantial output. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244038884,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EXL-X12.2D-FRONT_700x_637f5a2e-8d53-4ac3-a654-9fe694dd1683.jpg?v=1789261741"},{"product_id":"ds18-eqx7pro-high-volt-7-band-equalizer-with-high-level-input-auto-turn-on-and-high-volt-led-indicator","title":"DS18 EQX7PRO High Volt 7-Band Equalizer with High Level Input, Auto Turn On And High Volt Led Indicator","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 EQX7PRO is a high-voltage 7-band graphic equalizer with high-level input, auto turn-on, and per-band 7V indicators, engineered for serious multi-amp car audio builds where precise tuning and factory-integration matter. It delivers extended bandwidth, low-noise performance, and flexible front\/rear\/sub control for a clean, balanced install.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e7-band graphic equalizer\u003c\/b\u003e: Fixed frequency points at 50Hz, 125Hz, 320Hz, 750Hz, 2.2kHz, 6kHz, and 16kHz enable precise shaping across bass, mids, and highs for your specific vehicle and speaker pairings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBoost\/Cut range\u003c\/b\u003e: Each band can boost or cut up to 12dB (15dB for subwoofer frequencies), allowing substantial tonal adjustments without introducing excessive artifacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree RCA outputs\u003c\/b\u003e: Dedicated front, rear, and subwoofer outputs give you independent amplification pathways for a balanced, multi-amp system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level input with integrated converter\u003c\/b\u003e: High-level (speaker) input enables seamless integration with factory radios, converting high-level signals to line level for the EQ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAuto Turn-On and remote turn-on\u003c\/b\u003e: Automatically powers on when connected to the factory source; remote turn-on input\/output provides flexible system control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED indicators and display\u003c\/b\u003e: Blue backlit controls with 7V LED indicators for each band provide clear, at-a-glance status during tuning and adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExtended bandwidth and signal integrity\u003c\/b\u003e: 20Hz–30kHz frequency response with 100dB SNR and 0.005% THD deliver detailed, low-noise performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover and sub control\u003c\/b\u003e: Passive LPF crossover with 60\/120Hz points and 12dB\/Oct slope (subwoofer channel) ensures appropriate sub bass roll-off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput and input specs\u003c\/b\u003e: 8V output voltage, 2kΩ output impedance; inputs include Main (RCA) and Aux (RCA); gold-plated connectors maximize signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged enclosure and mounting\u003c\/b\u003e: Metal\/aluminum housing in satin black; mounting brackets allow placement beside the source unit or under the dash for easy front-panel access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical and power details\u003c\/b\u003e: Operating voltage 11–15V; subwoofer output rated at 9V; dimensions 7\" L × 4.4\" D × 1.18\" H; weight 1.85 lb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a premium install, the EQX7PRO serves as the central tuning hub for front\/rear\/sub channels, delivering precise band-by-band control, reliable factory integration, and clear, noise-free detail from 20Hz to 30kHz. The combination of auto-on, hi-level input, and three outputs makes it ideal for vehicles with factory radios or multi-amp configurations where consistent, repeatable EQ is essential.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244071652,"sku":null,"price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EQX7PRO-2000x2000_700x_aa661bf4-cf97-4a68-b127-aed581440c8d.webp?v=1789261742"},{"product_id":"ds18-dx2-deluxe-dx-kevlar-6-5-2-way-sound-quality-component-speaker-system-460-watts-4-ohm","title":"DS18 DX2 Deluxe DX Kevlar 6.5\" 2- Way Sound Quality Component Speaker System 460 Watts 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eDS18’s DX2 Deluxe 6.5\" 2-way component system is a complete front-stage upgrade built for enthusiasts who demand precise 2-way performance from a 4-ohm load. It bundles two DX2W 6.5\" woofers, two DX2T 1.18\" tweeters, and two DX2C passive crossovers for a cohesive, high-efficiency setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTwo DX2W 6.5\" Woofers\u003c\/b\u003e: 4 Ohm impedance with a carbon fiber cone for stiffness and an aluminum basket for heat dissipation, delivering bass extension from 50 Hz up to 12 kHz that pairs with the tweeters for a wide, controlled midrange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo DX2T 1.18\" Tweeters\u003c\/b\u003e: 4 Ohm impedance, neodymium magnet for efficient power handling, and a frequency response from 800 Hz to 20 kHz, enabling crisp high-end detail without harshness. Mounting depth 0.7\" supports versatile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo DX2C Passive 2-Way Crossovers\u003c\/b\u003e: 3.2 kHz crossover point with 12 dB\/oct slope to cleanly separate woofer and tweeter signals, rated for up to 300 W total, ensuring balanced power distribution across the band. Tweeter attenuation is 4 dB for fine-tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTweeter Attenuation Options\u003c\/b\u003e: 0 dB, 2 dB, and 4 dB loudness options at 12 dB\/octotone provide practical in-vehicle balancing to suit different acoustic environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: This DX2 kit is designed to deliver a cohesive 2-way front stage with a 4-ohm load, enabling a clean channel-to-channel integration with an appropriate amp. The carbon fiber cone and aluminum basket optimize bass response and thermal stability, while the neodymium tweeters and passive crossovers ensure clear highs with adjustable quieting options to match vehicle acoustics. The included pair of woofers, tweeters, and crossovers makes it a true component upgrade rather than a single-driver replacement, suitable for enthusiasts seeking precise imaging and extended frequency coverage in a 460W peak-capable system.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244104420,"sku":null,"price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DX2-2000X2000_700x_94ee9289-c629-46a8-8148-83350f362f8f.webp?v=1789261744"},{"product_id":"ds18-dtx-2-2-sound-quality-titanium-dome-tweeter-with-aluminum-body","title":"DS18 DTX 2.2\" Sound Quality Titanium Dome Tweeter with Aluminum Body","description":"\u003ch2 class=\"heading heading--small\"\u003e\u003cspan reveal=\"\"\u003eDS18 DTX\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 class=\"heading h3\"\u003e\n\u003cspan reveal=\"\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cdiv class=\"image-with-text__text-wrapper\" reveal=\"\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003e2.2” Sound Quality Titanium Dome Tweeter With Aluminum Body\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned specifically for car audio enthusiasts like you, DS18’s DTX sets a new standard for performance, power, and precision, for a symphony of sound that will take your breath away.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEvery element of the DTX has been professionally crafted to deliver a truly remarkable audio experience. Every centimeter of the DTX’s 2.2-inch design harnesses the power of high-frequency notes, effortlessly reproducing them with unparalleled clarity and precision.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo ensure the utmost reliability and performance, the experts at DS18 subjected the DTX to rigorous testing, pushing the boundaries of what is possible in car audio technology. We pushed the DTX to its limits, simulating extreme conditions to guarantee its resilience and unwavering performance.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDS18 understands power is essential in creating an unforgettable audio experience. That's why the DTX tweeter features an AES Power Rating of 15W and an astounding Peak Power Rating of 60W, allowing it to handle even the most demanding high-range frequencies with ease.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInstallation is a breeze with the compact and user-friendly design of the DTX tweeter. Its small form factor allows for easy mounting in any car audio setup, without compromising on performance. Pairing two of DS18’s DTX together not only enhances the aesthetics of your installation but also ensures a symmetrical soundscape that immerses you in music like never before.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBut don't just take our word for it. The DTX tweeter has garnered praise and acclaim from car audio enthusiasts worldwide. Countless testimonials speak of its transformative power, its ability to elevate any audio setup to new heights. Join the satisfied customers and competitors who have experienced the extreme performance of DS18's DTX tweeter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"text-with-icons__item technicalDataLoop\"\u003e\n\u003cdiv class=\"text-with-icons__content-wrapper\"\u003e\n\u003cp class=\"heading heading--small red\"\u003eSPECS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003cbr\u003e\u003c\/strong\u003eDTX\u003cbr\u003e\u003cstrong\u003eNominal Diameter\u003cbr\u003e\u003c\/strong\u003e2.2\" \/ 58 mm\u003cbr\u003e\u003cstrong\u003eNominal Impedance\u003cbr\u003e\u003c\/strong\u003e4 Ohms\u003cbr\u003e\u003cstrong\u003eAES Power Handling\u003cbr\u003e\u003c\/strong\u003e15W\u003cbr\u003e\u003cstrong\u003eProgram Power Handling\u003cbr\u003e\u003c\/strong\u003e30W\u003cbr\u003e\u003cstrong\u003ePeak Power Handling\u003cbr\u003e\u003c\/strong\u003e60W\u003cbr\u003e\u003cstrong\u003eSensitivity (1w\/1m)\u003cbr\u003e\u003c\/strong\u003e95.2 dB\u003cbr\u003e\u003cstrong\u003eFrequency Response\u003cbr\u003e\u003c\/strong\u003e900 Hz - 20 KHz\u003cbr\u003e\u003cstrong\u003eRecommended Hi Pass Crossover\u003cbr\u003e\u003c\/strong\u003e3.8 KHz\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__item technicalDataLoop\"\u003e\n\u003cdiv class=\"text-with-icons__icon-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__content-wrapper\"\u003e\n\u003cp class=\"heading heading--small red\"\u003eBODY | FEATURES\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePair or Single\u003cbr\u003e\u003c\/strong\u003ePair\u003cbr\u003e\u003cstrong\u003eBody Material\u003cbr\u003e\u003c\/strong\u003eAluminum\u003cbr\u003e\u003cstrong\u003eBody Color\u003cbr\u003e\u003c\/strong\u003eSilver\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__item technicalDataLoop\"\u003e\n\u003cdiv class=\"text-with-icons__icon-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__content-wrapper\"\u003e\n\u003cp class=\"heading heading--small red\"\u003eMOTOR\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Diameter\u003cbr\u003e\u003c\/strong\u003e1\" \/ 25.4mm\u003cbr\u003e\u003cstrong\u003eVoice Coil Former Material\u003cbr\u003e\u003c\/strong\u003eKCV\u003cbr\u003e\u003cstrong\u003eWinding Material\u003cbr\u003e\u003c\/strong\u003eCCAW\u003cbr\u003e\u003cstrong\u003eDiaphragm Material\u003cbr\u003e\u003c\/strong\u003eTitanium\u003cbr\u003e\u003cstrong\u003eMagnet Material\u003cbr\u003e\u003c\/strong\u003eNeodymium\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__item technicalDataLoop\"\u003e\n\u003cdiv class=\"text-with-icons__icon-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"text-with-icons__content-wrapper\"\u003e\n\u003cp class=\"heading heading--small red\"\u003eMEASUREMENTS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Diameter\u003cbr\u003e\u003c\/strong\u003e2.28\" \/ 58mm\u003cbr\u003e\u003cstrong\u003eOverall Depth\u003cbr\u003e\u003c\/strong\u003e1\" \/ 26mm\u003cbr\u003e\u003cstrong\u003eFront Mount Baffle Cutout\u003cbr\u003e\u003c\/strong\u003e1.85\" \/ 47mm\u003cbr\u003e\u003cstrong\u003eMounting Depth\u003cbr\u003e\u003c\/strong\u003e0.65\" \/ 16.5mm\u003cbr\u003e\u003cstrong\u003eProduct Weight\u003cbr\u003e\u003c\/strong\u003e0.5 lbs\u003cbr\u003e\u003cstrong\u003eProduct Dimensions\u003cbr\u003e\u003c\/strong\u003e5.5 x 2.75 x 1.5\u003cbr\u003e\u003cstrong\u003eM\/C Weight\u003cbr\u003e\u003c\/strong\u003e22 lbs\u003cbr\u003e\u003cstrong\u003eM\/C Dimensions\u003cbr\u003e\u003c\/strong\u003e14.75 x 11.5 x 6.75\u003cbr\u003e\u003cstrong\u003eM\/C QTY\u003cbr\u003e\u003c\/strong\u003e40\u003cbr\u003e\u003cstrong\u003eSold In\u003cbr\u003e\u003c\/strong\u003ePair\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244169956,"sku":null,"price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DTX-2000X2000_700x_70b07130-ecaa-4286-9041-435c5a6e9be2.webp?v=1789261746"},{"product_id":"ds18-dsp2-8dbt-2-channel-in-and-8-channel-out-digital-sound-processor-with-bluetooth-and-lcd-screen","title":"DS18 DSP2.8DBT 2-Channel In and 8-Channel Out Digital Sound Processor with Bluetooth and LCD Screen","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 DSP2.8DBT is a 2-channel in \/ 8-channel out digital sound processor with Bluetooth and an LCD screen, built for car-audio enthusiasts who demand precise, programmable control over their soundstage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e2-channel in \/ 8-channel out\u003c\/b\u003e: Two input channels feed eight outputs, enabling flexible routing to multiple amplifiers for a multi-amp setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e24‑bit resolution at 48 kHz\u003c\/b\u003e: High‑precision digital processing with standard automotive sampling for cleaner, more accurate signal restoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLatency 1.08 ms\u003c\/b\u003e: Low latency processing helps keep timing in the signal path tight, reducing noticeable delay between source and output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency range 15 Hz – 22 kHz (-1 dB)\u003c\/b\u003e: Wide, relatively flat operating band to cover sub-bass through treble with minimal attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTHD+N max 0.01% \/ SNR 100 dB\u003c\/b\u003e: Very low distortion and high dynamic range contribute to cleaner, more detailed playback at higher listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBluetooth interface + DSP2.8DBT App (iOS\/Android)\u003c\/b\u003e: Direct access to filtration settings via Bluetooth; use the companion app to tune, monitor, and save presets for different songs or genres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 independent parametric EQ bands per channel\u003c\/b\u003e: Three customizable frequency bands per output channel give surgical control over tonal balance across the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDynamic crossover filters\u003c\/b\u003e: Butterworth, Linkwitz-Riley, and Bessel options let you tailor crossover characteristics to your speakers and enclosure, improving integration and clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInputs \/ Outputs\u003c\/b\u003e: Unbalanced RCA inputs up to 6 V RMS with 47 kΩ impedance; eight unbalanced RCA outputs up to 2 V RMS with 470 kΩ impedance per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower, fuse, and dimensions\u003c\/b\u003e: 10–15 V DC input, 300 mA; 2 A fuse; dimensions 4.72\" × 9.84\" × 1.18\" (120 × 250 × 30 mm); weight 382 g.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car build, the DSP2.8DBT enables precise routing and tonal shaping across multiple amplifiers, with per-channel EQ and selectable crossover filters to match cabin acoustics and speaker placement. The Bluetooth interface and mobile app simplify tuning and enable quick preset recall for different listening scenarios, while the high‑resolution processing preserves signal integrity from source to outputs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244202724,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DSP2.8DBT-2000x2000_700x_3d013f54-1da5-45a0-aff5-5673b6677b4c.webp?v=1789261747"},{"product_id":"ds18-dbpm100-mx-digital-bass-processor-mexico-design","title":"DS18 DBPM100.MX Digital Bass Processor - Mexico Design","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 DBPM100.MX Digital Bass Processor (Mexico Design) is a compact, vehicle-friendly bass processor that lets you sculpt low-end output with precision, featuring a dual-knob dash remote for quick on-the-fly control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOperating Voltage\u003c\/b\u003e: 8-17V — designed to cope with the typical automotive power range, ensuring consistent bass performance across voltage swings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Consumption\u003c\/b\u003e: 0.24A — low current draw helps minimize parasitic load on the electrical system during bass-intensive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Turn-on (Input \/ Output)\u003c\/b\u003e: Yes — simplifies integration with head units and amplifiers, enabling automatic or manual activation of the processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes (Bass Enhancer) — adjust bass levels from the dash to dial in your preferred impact without reaching for the processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGround Isolation Switch\u003c\/b\u003e: Yes (GND\/ISO\/200Ω) — provides flexible grounding options to reduce noise in diverse installation scenarios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRCA Connector Type\u003c\/b\u003e: Tiffany (Silver) — high-quality connector standard for clean signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 10Hz-20kHz — wide, flat-like response across the audible band to preserve nuance while bass shaping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubsonic Infrasonic Cut-off\u003c\/b\u003e: 35\/50\/80Hz (selectable) — removes ultra-low frequencies that can muddy bass, improving clarity and headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGain\u003c\/b\u003e: 0~8.8V — broad adjustment range to finely scale bass output to the rest of your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCenter Frequency (Sweep)\u003c\/b\u003e: 75Hz~120Hz; \u003cb\u003eQ Factor (Wide)\u003c\/b\u003e: 1~3 — precise control over the bass potentiation region for tailoring impact vs. muddiness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput Voltage Selectable\u003c\/b\u003e: 5V\/7.5V\/10V — lets you match the processor’s output level to your amplifier chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput Impedance\u003c\/b\u003e: 100 ohms — defined impedance for predictable interconnect performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 20 kΩ — high enough to work well with low-level sources while maintaining signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSNR\u003c\/b\u003e: 120dB; \u003cb\u003eTHD\u003c\/b\u003e: 0.0022% — low noise and ultra-low distortion for clean bass even at higher levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level Speaker Input\u003c\/b\u003e: No — designed for low-level input, ensuring clean signal handling from compatible sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAuto Turn-on Function\u003c\/b\u003e: No — relies on the remote or head unit control for activation in installations that need it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicator\u003c\/b\u003e: Power \/ Bass Enhancer \/ Clip — visual feedback to monitor power, boost state, and potential distortion in real time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePCB\/Construction\u003c\/b\u003e: Anti-corrosion coating on the PCB; \u003cb\u003eHousing\u003c\/b\u003e: Aluminum; \u003cb\u003eOverall size\u003c\/b\u003e: 4.72\" × 4.4\" × 1\" (120 × 113 × 26 mm) — durable, compact design for flexible installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e (additional): Yes — enhances the usability of bass adjustments during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCustom Features\u003c\/b\u003e: Surface Mount Component Technology; Quality Control verified with Audio Precision instruments; Mexico Theme color option Red\/Green\/White.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, the DBPM100.MX sits in the signal chain to boost and shape bass from the source with selectable infrasonic filtering, precise gain, and a dash-mounted remote for hands-on control. Its compact aluminum enclosure and corrosion-resistant PCB suit installs where space is tight or harsh environments are a consideration, while the LED indicators and high signal-to-noise performance help you dial in clean, impactful bass without sacrificing clarity.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244235492,"sku":null,"price":155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/DBPM100.MX-2000x2000_700x_23766e6e-6506-4b21-8830-061fd1defa84.webp?v=1789261749"},{"product_id":"ds18-6xl650n-4-pro-6-midrange-325w-4-ohm","title":"DS18 6XL650N-4 Pro 6\" Midrange 325w 4 ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 6XL650N-4 Pro is a 6.5\" midrange loudspeaker with 325W RMS (650W peak) handling, built for high-demand car audio systems where midrange clarity and dynamic control matter. Neodymium rings and a rigid aluminum basket combine to deliver precise transient response in a compact package.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 6.5\" \/ 165mm — fits common door and kick-panel mounting cutouts, enabling straightforward installation in many vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — a standard load for many high-power amplifiers, balancing current draw with performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 325 Watts — continuous power capability supports sustained midrange clarity without excessive distortion when driven by a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMAX Power Handling\u003c\/b\u003e: 650 Watts — headroom for brief peak dynamics, allowing dynamic transients to come through without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 98.5 dB (1W\/1m) — higher sensitivity means more output with less input power, aiding efficient system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 60Hz - 12.5kHz — broad midrange to upper frequencies, enabling detailed vocal and instrument reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 100 Hz — low-cut helps protect the voice coil and improves integration with subs and other drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Neodymium — compact, high-strength magnet for precise control and reduced magnetic footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil\u003c\/b\u003e: 2\" \/ 50.8 mm Kapton former, CCAW winding — robust thermal stability under high-power conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket\u003c\/b\u003e: Aluminum, satin black — rigid frame that minimizes flex and contributes to cleaner transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight (Magnet)\u003c\/b\u003e: 11.4 oz — magnet mass contributing to magnetic efficiency in a compact package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement\u003c\/b\u003e: 0.34 L \/ 0.012 ft3 — internal volume affecting bass\/midrange extension and enclosure tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThiele \u0026amp; Small Parameters\u003c\/b\u003e: Vas 5.86 L; Xmax 3.7 mm; Fs 100 Hz; Qms 4.385; Qes 0.256; Qts 0.242; Mms 11.278 — parameters used for enclosure design and system tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a complete car audio install, the 6XL650N-4 Pro excels as a high-power midrange or center-channel element in a multi- speaker setup, delivering articulate vocal presence, detailed instrumentation, and controlled dynamics. Its Neodymium magnet, vented aluminum basket, and polished terminals help maintain signal integrity and reliable connections through extended listening sessions, while the 100 Hz crossover recommendation ensures clean integration with subwoofers and treble drivers. The result is a precise, energetic midrange that complements a high-performance system without sacrificing clarity.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244301028,"sku":null,"price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/6XL650N-4-FRONT_700x_22a67d65-924b-4d59-9f01-91f4d3143019.jpg?v=1789261751"},{"product_id":"ds18-candy-x5b-full-range-5-channel-class-d-car-amplifier-2000-watts","title":"DS18 CANDY-X5B Full Range 5-Channel Class D Car Amplifier 2000 Watts","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 CANDY-X5B is a compact full-range 5-channel Class D car amplifier delivering up to 2000W peak, built for tight installs that still demand a full multi-channel system. Its compact design lets you mount it virtually anywhere in your vehicle without sacrificing performance, while delivering 4 full-range channels plus a dedicated sub output in a single chassis.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Class\u003c\/b\u003e: Digital (Class D) design, enabling a compact form factor while delivering multi-channel power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Type\u003c\/b\u003e: Stereo Full Range + Subwoofer, providing separate pathways for front\/rear speakers and a dedicated sub channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of Channels\u003c\/b\u003e: 5, allowing a complete front, rear, and sub system from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum Impedance\u003c\/b\u003e: 2 ohm \/ 1 ohm (Sub) for the sub channel, offering flexibility with lower-impedance subs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTotal Watts (Peak)\u003c\/b\u003e: 2000W, indicating the maximum burst capability of the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 4 Ohm\u003c\/b\u003e: 80W x 4 + 220W (Sub), mapping solid mid\/high power to four channels and a robust sub channel at 4Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 2 Ohm\u003c\/b\u003e: 125W x 4 + 360W (Sub), providing increased output headroom for the main channels and sub at 2Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 1 Ohm\u003c\/b\u003e: 500W (Sub), showing sub headroom at very low impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 4 Ohm Bridge\u003c\/b\u003e: 250W x 2, enabling bridged operation for higher power to a larger sub or mono setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20Hz-20kHz, covering the full audible range with consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal-to-Noise Ratio\u003c\/b\u003e: \u0026gt;80 dB, contributing to a clean signal with low inherent noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eX-Over\u003c\/b\u003e: HPF\/FLAT (Fixed LPF Sub); X-Over Range 40-250Hz (50-150Hz Sub), allowing tonal shaping for mains and sub channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost\u003c\/b\u003e: 0dB–12dB (Sub); Bass Boost Frequency Fixed at 40Hz, enabling controlled low-end lift for the sub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInputs\u003c\/b\u003e: RCA and Hi\/Lo inputs, simplifying integration with aftermarket or factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes (Remote Dash Mount), convenient sub level adjustment from the driver seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooling\u003c\/b\u003e: No cooling fan, relying on efficient Class D design in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThermal Protection\u003c\/b\u003e: Yes (\u0026gt;180°F), safeguarding the amp from heat buildup during demanding playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOver-Load Protection\u003c\/b\u003e: Yes, protecting output stages from sudden stress or clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDC Output Protection\u003c\/b\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShort Circuit Output Protection\u003c\/b\u003e: Yes, guarding against external faults damaging the amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage Input Protection\u003c\/b\u003e: Yes (9-16V), tolerant of vehicle electrical variations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance\u003c\/b\u003e: 10K ohm, influencing compatibility with source devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Black Matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Input Terminal Size\u003c\/b\u003e: 4Ga, designed for a robust power connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFuse Size\u003c\/b\u003e: 40A x 2, providing primary protection for power wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e (duplicate entry): Yes \/ Remote Dash Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e: 11\" L x 5\" W x 1.87\" H (280mm × 127mm × 47.5mm); Heatsink Length 9.96\" (253mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 5.5 (gross single unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a typical 5-channel install, the CANDY-X5B supplies four full-range channels for speakers and a dedicated sub channel, with wiring flexibility across 2–4 ohms and bridged operation for higher sub output. The built-in crossover options, bass boost, and remote sub control give you precise tonal shaping without needing extensive external components, while RCA\/Hi-Lo inputs simplify integration with factory systems. Protective features—thermal, over-load, short-circuit, and voltage protection—help ensure long-term reliability in daily driving and enthusiast setups.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244333796,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/CANDY-X5-2000x2000_700x_a3826a9b-8df7-4165-9048-af834c104f8e.webp?v=1789261753"},{"product_id":"ds18-ixs10-4d-ixs-shallow-10-subwoofer-1200-watts-dvc-4-ohm","title":"DS18 IXS10.4D IXS Shallow 10\" Subwoofer 1200 Watts DVC 4-Ohm","description":"\u003cdiv\u003e\n\u003cp\u003eThe DS18 IXS10.4D is a shallow-mount 10\" subwoofer delivering up to 1200W peak (600W RMS) with dual 4-ohm voice coils, designed for compact installations without sacrificing serious bass energy.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 10\" \/ 254 mm — a larger radiating surface helps move more air for deeper bass while keeping a smaller overall enclosure footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4+4 ohms — dual 4-ohm voice coils provide flexible wiring options for a wide range of amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power Handling\u003c\/b\u003e: 600 W — continuous power rating that informs pairing with an appropriate amplifier and thermal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum Power Handling\u003c\/b\u003e: 1200 W — transient power capability for dynamic bass peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 84 dB (1W\/1m) — efficiency rating indicating how loud the sub will play per watt of input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 20 - 800 Hz — covers deep sub-bass and extends into the low midrange for musical impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 2.5\" \/ 63.5 mm — larger coil aids heat dissipation and power handling under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Aluminum — helps manage heat and rigidity at high excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWinding Material\u003c\/b\u003e: Copper — standard for reliable electrical performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCone Material\u003c\/b\u003e: Paper — provides a balanced mix of stiffness and detail in bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSurround Material\u003c\/b\u003e: Stitched rubber — durable long-travel surround for repeated high-output bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBasket Material\u003c\/b\u003e: Aluminum — rigid frame to minimize flex and improve accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Ferrite — provides steady magnetic force for consistent bass delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 62 oz — compact for a 10\" sub with substantial motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplacement Volume\u003c\/b\u003e: 0.9 L \/ 0.032 ft3 — amount of air moved inside the enclosure, influencing bass depth in a sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSealed Enclosure (Minimum Internal Volume)\u003c\/b\u003e: 14.2 L \/ 0.5 ft3 — recommended sealed space to achieve solid bass extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBox F3 (Sealed)\u003c\/b\u003e: 44 Hz — lower cutoff point indicating where deep bass remains controllable in a sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Diameter\u003c\/b\u003e: 10.63\" \/ 270 mm — physical footprint to plan mounting and enclosure integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a typical car audio build, the IXS10.4D pairs with a suitable amplifier to deliver clean, controlled bass in restricted spaces thanks to its shallow-mount design and sealed-enclosure guidance. Its dual 4-ohm voice coils offer wiring flexibility for broad amplifier compatibility, while the combination of aluminum basket, ferrite magnet, and stitched rubber surround supports reliable, long-term performance under daily driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244366564,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/IXS10.4D-FRONT_700x_25e8759b-5cfb-4fc7-ac18-893efd0dc77e.jpg?v=1789261754"},{"product_id":"ds18-ion600-1d-compact-full-range-class-d-1-channel-amplifier-600-watts-rms","title":"DS18 ION600.1D Compact Full-Range Class D 1-Channel Amplifier 600 Watts RMS","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 ION600.1D is a compact, full-range monoblock Class D amplifier delivering 600W RMS at 1Ω, built for high-efficiency single-channel power in tight car installs. Its selectable crossovers and remote level control let you tailor bass versus mids\/highs without adding another amp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e600W RMS @ 1Ω\u003c\/b\u003e: high current capability for demanding loads, providing strong bass and headroom when the speaker impedance drops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e400W RMS @ 2Ω\u003c\/b\u003e: solid power reserve at moderate loads, maintaining clean output as impedance changes in a system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e200W RMS @ 4Ω\u003c\/b\u003e: efficient operation at higher impedance with reliable performance for midrange or full-range channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response 10Hz–20kHz\u003c\/b\u003e: covers sub-bass through highs, enabling full-range sound without significant gaps in audible spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency 88% @ 4Ω\u003c\/b\u003e: more of the input power reaches the load, reducing heat and improving reliability in compact installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor 210\u003c\/b\u003e: helps control speaker cone movement for tighter transients and better bass articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput Impedance 27kΩ\u003c\/b\u003e: high input impedance minimizes loading of source units, compatible with Hi-Level inputs and Tiffany RCA terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSelectable X-Over: HP 15Hz–1kHz \/ LP 40Hz–20kHz\u003c\/b\u003e: lets you configure the amplifier for bass-focused or full-range duties, tailoring the output to the rest of the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost 0–12dB @ 45Hz\u003c\/b\u003e: adds targeted low-end lift without changing overall tonal balance, useful for tuning in smaller cabins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHi-Level Speaker Connector \u0026amp; Tiffany RCA Terminal\u003c\/b\u003e: versatile input options for factory radios or aftermarket head units, simplifying integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: adjust output level from the dash for precise in-car loudness matching during install or tuning sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection \u0026amp; Safety\u003c\/b\u003e: short-circuit, thermal, DC offset, high\/low voltage, and clipping protections safeguard the amp and speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicators\u003c\/b\u003e: Power\/Protect\/Clipping status helps you quickly diagnose operation and protect mode at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: moisture-protective PCB coating and bonded components enhance durability against vibration and corrosion in automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical \u0026amp; Wiring\u003c\/b\u003e: 6.14\" L × 4.72\" W × 2\" H enclosure, 4 AWG input, external 80A fuse, heatsink length 4.84\", no cooling fan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a real car audio build, the ION600.1D serves as a compact mono amplifier ideal for a dedicated sub or a high-power single-channel path in a multi-amp system. Its low-impedance capability, high efficiency, and flexible crossover options make tuning straightforward while protecting both amp and speakers in demanding automotive environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850244399332,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/ion600.1d-last-2023_700x_81653fa8-95d2-4ce4-9c1f-b25cbcc81d68.webp?v=1789261756"}],"url":"https:\/\/www.12voltoutlet.com\/collections\/ds18.oembed?page=3","provider":"12 Volt Outlet","version":"1.0","type":"link"}