{"title":"Pride Audio","description":"\u003cp\u003eExplore Pride Audio car speakers and tweeters at 12 Volt Outlet. Compare model-specific specifications, mounting dimensions and power requirements to build a matched car audio system.\u003c\/p\u003e","products":[{"product_id":"pride-easy-25-1-inch-dome-tweeters-pair","title":"Pride Easy 25 1\" Dome Tweeters, 25W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd high-frequency output to your car audio system with the Pride Easy 25 1-inch dome tweeters. Their neodymium magnets and aluminum-wire voice coils are paired with compact dimensions for planning a factory-location or custom installation.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 W RMS rating:\u003c\/strong\u003e The rating applies with a 4 kHz high-pass filter set to 12 dB\/octave.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact dimensions:\u003c\/strong\u003e A 40.3 mm outer diameter and 19 mm overall height help with fit planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnet:\u003c\/strong\u003e The driver uses a neodymium magnet and an electrical-steel magnetic core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied:\u003c\/strong\u003e The box includes two Pride Easy 25 tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ manufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eEasy 25 \/ E.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRMS power rating\u003c\/th\u003e\n\u003ctd\u003e25 W with a 4 kHz high-pass filter at 12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer-listed resistance (Re)\u003c\/th\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e2–20 kHz (−3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003e102 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet material\u003c\/th\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetic core material\u003c\/th\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil winding material\u003c\/th\u003e\n\u003ctd\u003eAluminum wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDome diameter\u003c\/th\u003e\n\u003ctd\u003e26.1 mm; nominal 1-inch format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e40.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the box\u003c\/th\u003e\n\u003ctd\u003eOne pair of Pride Easy 25 tweeters; 3.9 µF capacitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Easy 25 combines a compact dome format with defined mounting dimensions, helping you assess placement before installation. Its 25 W RMS rating is tied to a specific high-pass filter setting, so crossover setup is an important part of using the tweeters within their stated rating.\u003c\/p\u003e\n\u003cp\u003eThe listed 2–20 kHz frequency response describes the response range; it does not replace the specified 4 kHz, 12 dB\/octave high-pass setting for rated power.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse a 4 kHz high-pass filter with a 12 dB\/octave slope when applying the rated power. Check the mounting opening, available depth and wiring before installation. Compare the listed 40.3 mm outer diameter and 19 mm overall height with your intended location.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat crossover setting applies to the 25 W RMS rating?\u003c\/h3\u003e\n\u003cp\u003eThe rating is specified with a 4 kHz high-pass filter at 12 dB\/octave.\u003c\/p\u003e\n\u003ch3\u003eDoes the 2 kHz response limit indicate the recommended crossover point?\u003c\/h3\u003e\n\u003cp\u003eNo. The listed 2 kHz lower response limit is not the full-power crossover recommendation. Use the specified 4 kHz high-pass setting when applying rated power.\u003c\/p\u003e\n\u003ch3\u003eWhat are the tweeter’s mounting dimensions?\u003c\/h3\u003e\n\u003cp\u003eThe outer diameter is 40.3 mm, the overall height is 19 mm, and the dome diameter is 26.1 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe box includes one pair of Pride Easy 25 tweeters and a 3.9 µF capacitor.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Pride Easy 25 tweeters at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663673426148,"sku":"E.25","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-e-25-01.jpg?v=1792708824"},{"product_id":"pride-harmony-25-1-inch-dome-tweeters-pair","title":"Pride Harmony 25 1\" Dome Tweeters, 30W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd dedicated high-frequency detail to a two- or three-way car audio system with the Pride Harmony 25 1-inch dome tweeters. Each pair combines a neodymium magnet assembly with an electrical-steel core and carries a 30 W RMS rating.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-inch dome format:\u003c\/strong\u003e Adds a dedicated tweeter to a compatible car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2–24 kHz frequency response:\u003c\/strong\u003e Covers the manufacturer-listed high-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnet assembly:\u003c\/strong\u003e Uses neodymium with an electrical-steel magnetic core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair packaging:\u003c\/strong\u003e Includes two tweeters for a pair of installation positions.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eHarmony 25 \/ H.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power rating\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer-listed resistance (Re)\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e2–24 kHz (−3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet material\u003c\/td\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDome diameter\u003c\/td\u003e\n\u003ctd\u003e26.1 mm; nominal 1-inch format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e40.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Harmony 25 tweeters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Harmony 25 gives you a separately specified high-frequency driver for a two- or three-way car audio setup. Its listed response range, resistance, and RMS rating help you assess it alongside the other components in your system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse an appropriate high-pass crossover with the tweeters. The listed 2 kHz lower response limit is not a full-power crossover setting. Compare the 40.3 mm outer diameter and 19 mm height with your mounting location, and check whether adapters are needed.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat type of system are the Harmony 25 tweeters intended for?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for use as high-frequency drivers in a two- or three-way car audio system.\u003c\/p\u003e \u003ch3\u003eWhat is the RMS power rating?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer-listed RMS power rating is 30 W.\u003c\/p\u003e \u003ch3\u003eWhat resistance is listed?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer lists a resistance (Re) of 4 Ω.\u003c\/p\u003e \u003ch3\u003eWhat crossover should I use?\u003c\/h3\u003e\n\u003cp\u003eUse an appropriate high-pass crossover. The product details do not establish a specific crossover frequency or slope, and the 2 kHz response limit should not be treated as a full-power crossover setting.\u003c\/p\u003e \u003ch3\u003eHow much mounting space should I allow?\u003c\/h3\u003e\n\u003cp\u003eThe outer diameter is 40.3 mm and the overall height is 19 mm. Check these measurements against the installation location and any adapter requirements.\u003c\/p\u003e \u003ch3\u003eHow many tweeters are included?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one pair of Pride Harmony 25 tweeters.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Pride Harmony 25 tweeters and other car audio products at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663674736868,"sku":"H.25","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-h-25-01.jpg?v=1792708824"},{"product_id":"pride-hyper-tone-2-5-inch-horn-tweeters-pair","title":"Pride Hyper Tone 2.5\" Horn Tweeters, 30W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring focused high-frequency output to a two- or three-way car audio build with the Pride Hyper Tone 2.5-inch horn tweeters. Their copper-wire voice coils, high-temperature neodymium magnets and electrical-steel cores deliver a compact design for the high-frequency section.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-inch horn-tweeter format:\u003c\/strong\u003e Adds a dedicated high-frequency component to a compatible car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-wire voice coils:\u003c\/strong\u003e Uses copper winding in each tweeter’s voice coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnetic assembly:\u003c\/strong\u003e Combines a high-temperature neodymium magnet with an electrical-steel core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded capacitors:\u003c\/strong\u003e Two X-Cap Hi-Fi film capacitors come in the package for passive filtering.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eHyper Tone \/ HT.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal impedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling\u003c\/td\u003e\n\u003ctd\u003e30 W with a 6.3 kHz high-pass filter at 12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e6–17 kHz (−3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil winding material\u003c\/td\u003e\n\u003ctd\u003eCopper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet material\u003c\/td\u003e\n\u003ctd\u003eHigh-temperature neodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Hyper Tone horn tweeters, two X-Cap Hi-Fi film capacitors and a carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Hyper Tone provides a dedicated horn-tweeter option for the high-frequency section of a two- or three-way car audio build. Its 4 Ω nominal impedance and stated frequency response help you assess how it fits your system design.\u003c\/p\u003e\n\u003cp\u003eThe included capacitors are useful components for passive filtering, but the published 30 W power handling is specified with a 6.3 kHz high-pass filter at 12 dB\/octave. Plan the complete filter design rather than assuming one capacitor creates that slope.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the 64 mm outer diameter against the mounting opening, and confirm rear clearance before installation. Use the specified 6.3 kHz high-pass filter at 12 dB\/octave for the published power rating.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Pride Hyper Tone’s nominal impedance?\u003c\/h3\u003e\n\u003cp\u003eEach Hyper Tone horn tweeter has a nominal impedance of 4 Ω.\u003c\/p\u003e\n\u003ch3\u003eWhat filtering is specified for the 30 W power rating?\u003c\/h3\u003e\n\u003cp\u003eThe 30 W rating is specified with a 6.3 kHz high-pass filter at 12 dB\/octave. The complete filter design should provide that slope.\u003c\/p\u003e\n\u003ch3\u003eHow much mounting space should I allow?\u003c\/h3\u003e\n\u003cp\u003eThe outer diameter is 64 mm. Check the mounting opening and rear clearance for your installation.\u003c\/p\u003e\n\u003ch3\u003eWhat comes with the pair?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one pair of Pride Hyper Tone horn tweeters, two X-Cap Hi-Fi film capacitors and a carton.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eWant to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663675326692,"sku":"HT.25","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-ht-25-01.jpg?v=1792708824"},{"product_id":"pride-hyper-tone-light-horn-tweeters-pair","title":"Pride Hyper Tone Light Horn Tweeters, 30W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd dedicated high-frequency output to your car audio system with the Pride Hyper Tone Light horn tweeters. This 4-ohm pair has a neodymium magnet assembly, a steel frame, and a 30W RMS rating.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn-tweeter design:\u003c\/strong\u003e Built for high-frequency reproduction on a dedicated channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnet:\u003c\/strong\u003e A specified part of the tweeter’s magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel frame:\u003c\/strong\u003e Provides the frame construction for each tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive-filter capacitors:\u003c\/strong\u003e Two included X-Cap Hi-Fi film capacitors add passive-filter components to the set.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eHyper Tone Light \/ HTL.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power rating\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e4–20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame material\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet material\u003c\/td\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Hyper Tone Light horn tweeters, two X-Cap Hi-Fi film capacitors and a carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Hyper Tone Light is designed for a dedicated high-frequency channel. Its 4-ohm impedance and published RMS rating give you key figures to consider when matching it with the rest of your car audio system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the outer diameter, cutout, and required mounting depth before ordering or cutting a panel. Use a suitable high-pass crossover for the installation.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the impedance of each tweeter?\u003c\/h3\u003e\n\u003cp\u003eEach Pride Hyper Tone Light is rated at 4 Ω.\u003c\/p\u003e\n\u003ch3\u003eWhat does the 30W RMS rating refer to?\u003c\/h3\u003e\n\u003cp\u003eIt is the product’s published RMS power rating.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the package?\u003c\/h3\u003e\n\u003cp\u003eThe set includes one pair of horn tweeters, two X-Cap Hi-Fi film capacitors, and a carton.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before mounting?\u003c\/h3\u003e\n\u003cp\u003eCheck the tweeter’s outer diameter, cutout, and required depth against your intended mounting location.\u003c\/p\u003e\n\u003ch3\u003eDoes the set include a crossover?\u003c\/h3\u003e\n\u003cp\u003eIt includes two film capacitors for passive filtering. Use a suitable high-pass crossover in the system.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Pride Hyper Tone Light at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663685583076,"sku":"HTL.25","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-htl-25-01.jpg?v=1792709074"},{"product_id":"pride-hyper-tone-plus-2-5-inch-horn-tweeters-pair","title":"Pride Hyper Tone Plus 2.5\" Horn Tweeters, 40W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd high-frequency output to a custom car audio setup with the Pride Hyper Tone Plus 2.5-inch horn tweeters. This pair combines copper-wire voice coils, high-temperature neodymium magnets and a published 4.5–20 kHz frequency response.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair of horn tweeters:\u003c\/strong\u003e The 2.5-inch format gives you two tweeters for a stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-wire voice coils:\u003c\/strong\u003e Copper winding is part of the tweeter’s specified construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnets:\u003c\/strong\u003e High-temperature neodymium magnets and an electrical-steel core make up the magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded capacitors:\u003c\/strong\u003e Two X-Cap Hi-Fi film capacitors come in the carton.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation measurements:\u003c\/strong\u003e The 64 mm housing diameter and 36.5 mm overall height help you plan a custom mounting location.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eHyper Tone Plus \/ HTP.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003e2.5-inch horn tweeter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal impedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling\u003c\/td\u003e\n\u003ctd\u003e40 W with a 6.3 kHz high-pass filter at 12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e4.5–20 kHz (−3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil winding material\u003c\/td\u003e\n\u003ctd\u003eCopper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet material\u003c\/td\u003e\n\u003ctd\u003eHigh-temperature neodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e36.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Hyper Tone Plus horn tweeters, two X-Cap Hi-Fi film capacitors and a carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Hyper Tone Plus brings together a compact horn-tweeter format and clearly stated installation dimensions. Its copper-wire voice coils, neodymium magnets and electrical-steel core give you specific construction details to consider when choosing tweeters for a custom system.\u003c\/p\u003e\n\u003cp\u003eThe rated 40 W power handling is tied to a particular high-pass filter setting. That condition helps you plan the signal filtering around the tweeters rather than relying on the frequency-response range alone.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse a 6.3 kHz high-pass filter with a 12 dB\/octave slope for the stated 40 W power handling. The 4.5 kHz response limit is not a full-power crossover recommendation.\u003c\/p\u003e\n\u003cp\u003eBefore installation, check the mounting opening, rear clearance and filter slope against your setup. The 64 mm outer diameter and 36.5 mm overall height are useful planning measurements.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat filter is specified for the 40 W power handling?\u003c\/h3\u003e\n\u003cp\u003eThe rating is specified with a 6.3 kHz high-pass filter at 12 dB per octave.\u003c\/p\u003e\n\u003ch3\u003eDoes the 4.5 kHz response limit mean I should cross over there?\u003c\/h3\u003e\n\u003cp\u003eNo. The 4.5 kHz limit describes the published frequency response; it is not a full-power crossover recommendation.\u003c\/p\u003e\n\u003ch3\u003eWhat are the tweeter’s mounting measurements?\u003c\/h3\u003e\n\u003cp\u003eThe outer diameter is 64 mm, and the overall height is 36.5 mm. Check the mounting opening and rear clearance for your installation.\u003c\/p\u003e\n\u003ch3\u003eWhat comes with the pair?\u003c\/h3\u003e\n\u003cp\u003eThe carton contains one pair of Pride Hyper Tone Plus horn tweeters and two X-Cap Hi-Fi film capacitors.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Pride Hyper Tone Plus at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663685877988,"sku":"HTP.25","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-htp-25-01.jpg?v=1792430780"},{"product_id":"pride-ruby-air-6-5-v2-midrange-speakers-pair","title":"Pride Ruby Air 6.5 v2 Midrange Speakers, 100W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild your car audio system’s midrange around the Pride Ruby Air 6.5 v2, a 6.5-inch speaker pair with a hybrid magnetic system and electrical-steel core. Each speaker is rated at 100 W, with a 200 W maximum power handling rating.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair included:\u003c\/strong\u003e You receive two speakers for a matched midrange installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Ω impedance:\u003c\/strong\u003e Use this rating when checking amplifier and system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid magnetic system:\u003c\/strong\u003e The electrical-steel core is a defined part of the speaker’s magnetic design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-paper cone:\u003c\/strong\u003e The cone material is specified alongside a paper dust cap and Nomex Cloth surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting dimensions listed:\u003c\/strong\u003e Compare the outer diameter, opening, depth and hole layout with your installation space before cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer high-pass guidance:\u003c\/strong\u003e The specified 160 Hz filter setting and 18 dB\/octave slope provide a starting point for system setup.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ manufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eRuby Air 6.5 v2 \/ RA.65V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal size\u003c\/th\u003e\n\u003ctd\u003e6.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpedance\u003c\/th\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer’s high-pass guidance\u003c\/th\u003e\n\u003ctd\u003e160 Hz at 18 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetic system\u003c\/th\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetic core material\u003c\/th\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting opening diameter\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting depth\u003c\/th\u003e\n\u003ctd\u003e63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting flange height\u003c\/th\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting-hole spacing, as listed by Pride\u003c\/th\u003e\n\u003ctd\u003e162 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum power handling\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003e93.2 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil diameter\u003c\/th\u003e\n\u003ctd\u003e1 inch \/ 25.40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil former\u003c\/th\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone material\u003c\/th\u003e\n\u003ctd\u003ePressed Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust-cap material\u003c\/th\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurround material\u003c\/th\u003e\n\u003ctd\u003eNomex Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket material\u003c\/th\u003e\n\u003ctd\u003eStamped steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket finish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEquivalent compliance volume (Vas)\u003c\/th\u003e\n\u003ctd\u003e7.8 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFree-air resonance (Fs)\u003c\/th\u003e\n\u003ctd\u003e122 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Q (Qms)\u003c\/th\u003e\n\u003ctd\u003e5.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Q (Qes)\u003c\/th\u003e\n\u003ctd\u003e0.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Q (Qts)\u003c\/th\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoving mass (Mms)\u003c\/th\u003e\n\u003ctd\u003e6.85 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical compliance (Cms)\u003c\/th\u003e\n\u003ctd\u003e0.25 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForce factor (BL), as listed by Pride\u003c\/th\u003e\n\u003ctd\u003e3.98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC resistance (Re)\u003c\/th\u003e\n\u003ctd\u003e3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting screw-hole diameter\u003c\/th\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the box\u003c\/th\u003e\n\u003ctd\u003eOne pair of Pride Ruby Air 6.5 v2 speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Ruby Air 6.5 v2 gives you a defined set of electrical, material and mounting specifications for planning a midrange speaker installation. Its listed dimensions help you assess panel space, while the 4 Ω impedance and power ratings help guide system matching.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the 150 mm mounting opening, 63 mm depth and 162 mm mounting-hole spacing against the actual installation before drilling or cutting. Follow Pride’s 160 Hz high-pass guidance at 18 dB\/octave, and set amplifier gain appropriately.\u003c\/p\u003e\n\u003cp\u003eManufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 100 W rating the maximum power handling?\u003c\/h3\u003e\n\u003cp\u003eNo. The listed rated power is 100 W, and maximum power handling is 200 W.\u003c\/p\u003e\n\u003ch3\u003eWhat impedance should I account for?\u003c\/h3\u003e\n\u003cp\u003eEach Ruby Air 6.5 v2 speaker is listed at 4 Ω. Check your amplifier and system requirements before connecting the pair.\u003c\/p\u003e\n\u003ch3\u003eWhat high-pass setting does Pride recommend?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer’s guidance is 160 Hz at 18 dB\/octave.\u003c\/p\u003e\n\u003ch3\u003eWhat dimensions should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eAllow for a 173.5 mm outer diameter, 150 mm mounting opening and 63 mm mounting depth. The listed mounting-hole spacing is 162 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one pair of Pride Ruby Air 6.5 v2 speakers.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexplore our Pride brand profile\u003c\/a\u003e to learn more about the brand.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663689482468,"sku":"RA.65V2","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-ra-65v2-speaker-01.jpg?v=1792709074"},{"product_id":"pride-ruby-air-69-6x9-midrange-speakers-pair","title":"Pride Ruby Air 69 6×9\" Midrange Speakers, 100W RMS (Pair)","description":"\u003cp\u003ePride Ruby Air 69 speakers bring a midrange-focused option to a 6 × 9-inch installation. This RA.69 pair uses paper cones and is intended for vocals and upper-bass punch rather than deep sub-bass.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 × 9-inch midrange speakers, sold as a pair.\u003c\/li\u003e\n\u003cli\u003ePower handling: 100 watts RMS.\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms.\u003c\/li\u003e\n\u003cli\u003eFrequency response: 120–12,000 Hz.\u003c\/li\u003e\n\u003cli\u003eMounting depth: 81 mm.\u003c\/li\u003e\n\u003cli\u003eMounting opening: 147 × 215 mm; outer dimensions: 165 × 236 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the opening, depth and grille clearance before fitting the speakers to doors or a rear deck.\u003c\/p\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663690203364,"sku":"RA.69","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-ra-69-speaker-01.jpg?v=1792430787"},{"product_id":"pride-ruby-light-6-5-v2-midrange-speakers-pair","title":"Pride Ruby Light 6.5 v2 Midrange Speakers (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring clear midrange output to your car audio system with the Pride Ruby Light 6.5 v2 midrange speakers. This 4-ohm pair combines a hybrid magnetic system with an electrical-steel core, with a listed frequency response of 160 Hz–10 kHz.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-inch nominal size:\u003c\/strong\u003e Plan your speaker installation around a familiar nominal size and the supplied mounting measurements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid magnetic system:\u003c\/strong\u003e A hybrid system and electrical-steel core form the speaker motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed paper cone:\u003c\/strong\u003e The cone material is specified for shoppers comparing speaker construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92.1 dB sensitivity:\u003c\/strong\u003e The sensitivity rating is measured at 1 W \/ 1 m for a clearly stated comparison point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied:\u003c\/strong\u003e The box contains two Pride Ruby Light 6.5 v2 speakers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eRuby Light 6.5 v2 \/ RL.65V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003e6.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e160 Hz–10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic system\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting opening diameter\u003c\/td\u003e\n\u003ctd\u003e149 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting depth\u003c\/td\u003e\n\u003ctd\u003e61 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e92.1 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer’s high-pass guidance\u003c\/td\u003e\n\u003ctd\u003e100–160 Hz, depending on power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil diameter\u003c\/td\u003e\n\u003ctd\u003e1 inch \/ 25.40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil former\u003c\/td\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone material\u003c\/td\u003e\n\u003ctd\u003ePressed Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust-cap material\u003c\/td\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround material\u003c\/td\u003e\n\u003ctd\u003eNomex Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket material\u003c\/td\u003e\n\u003ctd\u003eStamped steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket finish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent compliance volume (Vas)\u003c\/td\u003e\n\u003ctd\u003e5.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree-air resonance (Fs)\u003c\/td\u003e\n\u003ctd\u003e133 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Q (Qms)\u003c\/td\u003e\n\u003ctd\u003e5.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Q (Qes)\u003c\/td\u003e\n\u003ctd\u003e1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Q (Qts)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving mass (Mms)\u003c\/td\u003e\n\u003ctd\u003e6.95 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical compliance (Cms)\u003c\/td\u003e\n\u003ctd\u003e0.22 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce factor (BL), as listed by Pride\u003c\/td\u003e\n\u003ctd\u003e3.72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC resistance (Re)\u003c\/td\u003e\n\u003ctd\u003e3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting flange height\u003c\/td\u003e\n\u003ctd\u003e9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting screw-hole diameter\u003c\/td\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting-hole spacing\u003c\/td\u003e\n\u003ctd\u003e162 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Ruby Light 6.5 v2 speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Ruby Light 6.5 v2 gives you a defined set of midrange specifications and construction details for planning a car audio setup. Its listed sensitivity, impedance, and frequency response help you compare it with your system requirements.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the mounting opening, depth, and fastener locations against your installation space before fitting the speakers. Use suitable high-pass filtering within the manufacturer’s 100–160 Hz guidance, depending on power. The supplied listing contains conflicting RMS ratings, so confirm the current RMS rating with the manufacturer before selecting amplifier power.\u003c\/p\u003e\n\u003cp\u003eManufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the impedance of this speaker pair?\u003c\/h3\u003e\n\u003cp\u003eEach speaker is listed at 4 Ω. Check that your amplifier supports the load required by your system.\u003c\/p\u003e\n\u003ch3\u003eWhat high-pass setting does Pride recommend?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer’s guidance is 100–160 Hz, depending on power.\u003c\/p\u003e\n\u003ch3\u003eWhat mounting measurements should I check?\u003c\/h3\u003e\n\u003cp\u003eCompare the 149 mm mounting opening, 61 mm mounting depth, and 162 mm mounting-hole spacing with your available space and fastener locations.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one pair of Pride Ruby Light 6.5 v2 speakers.\u003c\/p\u003e\n\u003ch3\u003eWhat RMS rating should I use when choosing an amplifier?\u003c\/h3\u003e\n\u003cp\u003eConfirm the current RMS rating with the manufacturer before selecting amplifier power.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Pride Ruby Light 6.5 v2 pair at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663704686820,"sku":"RL.65V2","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-rl-65v2-speaker-01.jpg?v=1792708871"},{"product_id":"pride-ruby-performance-6-5-midrange-speakers-pair","title":"Pride Ruby Performance 6.5 Midrange Speakers, 200W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd a dedicated midrange speaker to your car audio system with the Pride Ruby Performance 6.5. This 4-ohm pair features a hybrid magnet assembly and electrical-steel core, with a published 160 Hz–10 kHz frequency response.\u003c\/p\u003e\n\u003cp\u003eIts 200 W power-handling rating is specified with a 160 Hz high-pass filter set to 18 dB per octave. Check the mounting space and filtering requirements as you plan your installation.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-inch midrange design:\u003c\/strong\u003e The nominal size helps you compare the speaker with your planned mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 W power handling:\u003c\/strong\u003e This rating applies with the specified 160 Hz, 18 dB-per-octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid magnet assembly:\u003c\/strong\u003e The hybrid magnet is a defining part of the Ruby Performance speaker design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical-steel core:\u003c\/strong\u003e This specified core material distinguishes the speaker’s magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94.9 dB sensitivity:\u003c\/strong\u003e The published measurement is 94.9 dB at 1 W \/ 1 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied:\u003c\/strong\u003e The package contains two speakers and a carton; the metal mesh and ABS ring are not included.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eRuby Performance 6.5 \/ RP.65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003e6.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal impedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower handling\u003c\/td\u003e\n\u003ctd\u003e200 W with a 160 Hz high-pass filter at 18 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e160 Hz–10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet type\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum power handling\u003c\/td\u003e\n\u003ctd\u003e400 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e94.9 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer’s high-pass guidance\u003c\/td\u003e\n\u003ctd\u003e100–160 Hz, depending on power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil diameter\u003c\/td\u003e\n\u003ctd\u003e1.5 inches \/ 38.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil former\u003c\/td\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone material\u003c\/td\u003e\n\u003ctd\u003ePressed Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust-cap material\u003c\/td\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround material\u003c\/td\u003e\n\u003ctd\u003eNomex Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket material\u003c\/td\u003e\n\u003ctd\u003eStamped steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket finish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent compliance volume (Vas)\u003c\/td\u003e\n\u003ctd\u003e8.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree-air resonance (Fs)\u003c\/td\u003e\n\u003ctd\u003e96.5 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Q (Qms)\u003c\/td\u003e\n\u003ctd\u003e4.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Q (Qes)\u003c\/td\u003e\n\u003ctd\u003e0.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Q (Qts)\u003c\/td\u003e\n\u003ctd\u003e0.31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving mass (Mms)\u003c\/td\u003e\n\u003ctd\u003e9.3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical compliance (Cms)\u003c\/td\u003e\n\u003ctd\u003e0.29 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce factor (BL), as listed by Pride\u003c\/td\u003e\n\u003ctd\u003e7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC resistance (Re)\u003c\/td\u003e\n\u003ctd\u003e3.3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting flange height\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting screw-hole diameter\u003c\/td\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting-hole spacing\u003c\/td\u003e\n\u003ctd\u003e163.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Ruby Performance 6.5 speakers and a carton. Metal mesh and the ABS ring are not included.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Ruby Performance 6.5 combines a 4-ohm nominal impedance with a published response reaching from 160 Hz to 10 kHz. Its pressed-paper cone, paper dust cap, Nomex Cloth surround, and stamped-steel basket give you specific construction details to consider when choosing midrange speakers.\u003c\/p\u003e\n\u003cp\u003eThe published sensitivity and power ratings also help you compare this pair with the requirements of your audio system. Keep the stated filter conditions in mind when assessing the 200 W rating.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eFor the published 200 W power rating, use a 160 Hz high-pass filter at 18 dB per octave. Pride’s high-pass guidance is 100–160 Hz, depending on power.\u003c\/p\u003e\n\u003cp\u003eCheck the mounting depth and cutout before installation. Compare the listed outer diameter, flange height, screw-hole diameter, and hole spacing with your available mounting location. Choose any grille or ring separately after confirming compatibility.\u003c\/p\u003e\n\u003cp\u003eManufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat filter is specified for the 200 W rating?\u003c\/h3\u003e\n\u003cp\u003eThe published 200 W rating specifies a 160 Hz high-pass filter with an 18 dB-per-octave slope.\u003c\/p\u003e\n\u003ch3\u003eWhat is the speaker’s nominal impedance?\u003c\/h3\u003e\n\u003cp\u003eEach speaker has a nominal impedance of 4 Ω.\u003c\/p\u003e\n\u003ch3\u003eHow much power handling is listed?\u003c\/h3\u003e\n\u003cp\u003eThe listed power handling is 200 W under the specified filter conditions. Maximum power handling is listed separately as 400 W.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the package?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one pair of Pride Ruby Performance 6.5 speakers and a carton. The metal mesh and ABS ring are excluded.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before mounting?\u003c\/h3\u003e\n\u003cp\u003eCompare the speaker’s listed mounting measurements with your cutout and available depth before installation.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop for the Pride Ruby Performance 6.5 at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663710879972,"sku":"RP.65","price":210.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-rp-65-speaker-01.jpg?v=1792708872"},{"product_id":"pride-solo-300-6-5-competition-speakers-pair","title":"Pride Solo 300 6.5 Competition Speakers, 300W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a custom car-audio system around the Pride Solo 300 6.5 Competition, a 6.5-inch midrange speaker rated for 300 W RMS. Its replaceable moving-assembly module and aluminum basket with eight mounting points suit custom installation planning.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable moving assembly:\u003c\/strong\u003e The cone, coil, dust cap, leads, and terminals are grouped into a module for replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKapton voice-coil former:\u003c\/strong\u003e The 1.75-inch voice coil uses a Kapton former.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum basket:\u003c\/strong\u003e Eight mounting points provide options for securing the speaker in a custom installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair included:\u003c\/strong\u003e The box contains two Pride Solo 300 6.5 Competition speakers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eSolo 300 6.5 Competition \/ SL300.65COMP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003e6.5 inches \/ 165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal impedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power handling\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum power handling\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer’s high-pass guidance\u003c\/td\u003e\n\u003ctd\u003e100–160 Hz, depending on applied power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 inches \/ 44.45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil former\u003c\/td\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil winding material\u003c\/td\u003e\n\u003ctd\u003eCCAW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone material\u003c\/td\u003e\n\u003ctd\u003ePressed paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust-cap material\u003c\/td\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround material\u003c\/td\u003e\n\u003ctd\u003eNomex cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket material\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket finish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic system\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent compliance volume (Vas)\u003c\/td\u003e\n\u003ctd\u003e3.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree-air resonance (Fs)\u003c\/td\u003e\n\u003ctd\u003e160 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Q (Qms)\u003c\/td\u003e\n\u003ctd\u003e1.77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Q (Qes)\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Q (Qts)\u003c\/td\u003e\n\u003ctd\u003e0.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving mass (Mms)\u003c\/td\u003e\n\u003ctd\u003e10.9 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce factor (BL), as listed by Pride\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone area (Sd)\u003c\/td\u003e\n\u003ctd\u003e161 cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC resistance (Re)\u003c\/td\u003e\n\u003ctd\u003e3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting opening diameter\u003c\/td\u003e\n\u003ctd\u003e152 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting screw-hole diameter\u003c\/td\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting-hole spacing\u003c\/td\u003e\n\u003ctd\u003e166 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Solo 300 6.5 Competition speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eManufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe modular moving assembly is a defining design feature: the cone, coil, dust cap, leads, and terminals are grouped together as a replaceable unit. This can be useful when planning maintenance for a custom system; confirm the exact compatible replacement module before servicing the driver.\u003c\/p\u003e\n\u003cp\u003eThe 4-ohm impedance and stated power ratings give you key figures to consider when matching the speakers to your system. The manufacturer’s high-pass guidance varies with applied power, so crossover selection is part of system planning.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis model is intended for custom installations, not as an assumed direct factory replacement. Check mounting support, enclosure requirements, and clearance before installation. Confirm the current depth and flange dimensions before preparing the mounting surface.\u003c\/p\u003e\n\u003cp\u003eSet high-pass filtering according to applied power and the manufacturer’s guidance. Professional installation is recommended. For service, follow the manufacturer’s procedure and use the required tools.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the RMS power rating?\u003c\/h3\u003e\n\u003cp\u003eEach speaker is rated at 300 W RMS, with maximum power handling listed as 600 W.\u003c\/p\u003e \u003ch3\u003eWhat impedance should I account for?\u003c\/h3\u003e\n\u003cp\u003eThe nominal impedance is 4 Ω. Consider this rating when matching the speakers to the rest of your system.\u003c\/p\u003e \u003ch3\u003eWill these speakers fit a factory opening?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for custom installations rather than an assumed direct factory replacement. Compare the 152 mm mounting opening, 173.5 mm outer diameter, and 166 mm mounting-hole spacing with your planned mounting location.\u003c\/p\u003e \u003ch3\u003eWhat high-pass setting should I use?\u003c\/h3\u003e\n\u003cp\u003ePride’s guidance is 100–160 Hz, depending on applied power. Set the crossover according to the power used and the manufacturer’s guidance.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Pride audio products at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663713468644,"sku":"SL300.65COMP","price":220.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-300-6-5-competition-speakers-01.jpg?v=1792708871"},{"product_id":"pride-solo-140-6-5-midrange-speakers-pair","title":"Pride Solo 140 6.5 Midrange Speakers, 140W RMS (Pair)","description":"\u003cp\u003ePride Solo 140 speakers provide a 6.5-inch midrange option for custom car-audio systems. This SL140.65 pair is intended to work with suitable filtering and complementary bass and high-frequency drivers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6.5-inch speakers, supplied as a pair.\u003c\/li\u003e\n\u003cli\u003ePower handling: 140 watts RMS.\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms.\u003c\/li\u003e\n\u003cli\u003eManufacturer-recommended operating range: 160 Hz–10 kHz.\u003c\/li\u003e\n\u003cli\u003eManufacturer high-pass guidance: 160 Hz, depending on applied power.\u003c\/li\u003e\n\u003cli\u003eMounting opening diameter: 149 mm; overall diameter: 173.5 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck available installation space and set crossover protection for the power used.\u003c\/p\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663716057316,"sku":"SL140.65","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-140-6-5-speakers-01.jpg?v=1792709557"},{"product_id":"pride-solo-200-6-5-competition-speakers-pair","title":"Pride Solo 200 6.5 Competition Speakers, 200W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Pride Solo 200 6.5 Competition is a pair of 6.5-inch car audio midrange speakers for custom installations. Each speaker handles 200 W RMS at 4 Ω and uses a pressed-paper cone with a 1.5-inch voice coil on a Kapton former.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer recommends an operating range of 160 Hz–10 kHz. An eight-point mounting layout and listed mounting dimensions help you plan the installation.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200 W RMS power handling:\u003c\/strong\u003e Match your amplifier and settings to the stated rating for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Ω nominal impedance:\u003c\/strong\u003e Use the impedance when checking amplifier compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-paper cone:\u003c\/strong\u003e This specified cone material is part of the speaker’s midrange design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKapton voice-coil former:\u003c\/strong\u003e The 1.5-inch voice coil uses a Kapton former.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-point mounting layout:\u003c\/strong\u003e Check the mounting pattern against your intended baffle or custom mount.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ manufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eSolo 200 6.5 Competition \/ SL200.65COMP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal size\u003c\/th\u003e\n\u003ctd\u003e6.5 inches \/ 165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal impedance\u003c\/th\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRMS power handling\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003e96.5 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer-recommended operating range\u003c\/th\u003e\n\u003ctd\u003e160 Hz–10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer’s high-pass guidance\u003c\/th\u003e\n\u003ctd\u003e160 Hz, depending on applied power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil diameter\u003c\/th\u003e\n\u003ctd\u003e1.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil former\u003c\/th\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone material\u003c\/th\u003e\n\u003ctd\u003ePressed paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust-cap material\u003c\/th\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket finish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetic core material\u003c\/th\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEquivalent compliance volume (Vas)\u003c\/th\u003e\n\u003ctd\u003e10.5 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFree-air resonance (Fs)\u003c\/th\u003e\n\u003ctd\u003e99 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Q (Qms)\u003c\/th\u003e\n\u003ctd\u003e2.72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Q (Qes)\u003c\/th\u003e\n\u003ctd\u003e0.36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Q (Qts)\u003c\/th\u003e\n\u003ctd\u003e0.31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoving mass (Mms)\u003c\/th\u003e\n\u003ctd\u003e8.9 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone area (Sd)\u003c\/th\u003e\n\u003ctd\u003e161 cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting opening diameter\u003c\/th\u003e\n\u003ctd\u003e149 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting screw-hole diameter\u003c\/th\u003e\n\u003ctd\u003e4.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting-hole spacing\u003c\/th\u003e\n\u003ctd\u003e164 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the box\u003c\/th\u003e\n\u003ctd\u003eOne pair of Pride Solo 200 6.5 Competition speakers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer warning\u003c\/th\u003e\n\u003ctd\u003eCancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Solo 200 6.5 Competition gives you a defined set of power, impedance, and frequency-range details to use when planning a custom car audio system. Its listed sensitivity and speaker parameters also help you assess the model alongside your other system components.\u003c\/p\u003e\n\u003cp\u003eThe pair format suits an installation requiring two speakers. Review the ratings and measurements together before choosing an amplifier, crossover settings, or mounting location.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eSet amplifier gain and filtering for the 200 W RMS model rating. Use the manufacturer’s power-dependent 160 Hz high-pass guidance when planning crossover settings.\u003c\/p\u003e\n\u003cp\u003eThe listed mounting opening is 149 mm, but confirm rear clearance, total depth, and flange measurements with the manufacturer before cutting or ordering custom mounts. Check the eight-point layout and your system’s 4 Ω load requirements during installation planning.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 200 W RMS rating for each speaker or the pair?\u003c\/h3\u003e\n\u003cp\u003eThe listed RMS power handling is 200 W. Match amplifier settings to the model rating during system setup.\u003c\/p\u003e\n\u003ch3\u003eWhat high-pass setting does the manufacturer recommend?\u003c\/h3\u003e\n\u003cp\u003eThe guidance is 160 Hz, depending on applied power. Use that power-dependent recommendation when planning crossover settings.\u003c\/p\u003e\n\u003ch3\u003eWhat mounting opening is listed?\u003c\/h3\u003e\n\u003cp\u003eThe mounting opening diameter is 149 mm. Check the complete mounting pattern and required depth before preparing the installation.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe box contains one pair of Pride Solo 200 6.5 Competition speakers.\u003c\/p\u003e\n\u003ch3\u003eWhat impedance should I account for?\u003c\/h3\u003e\n\u003cp\u003eEach model is listed with a nominal impedance of 4 Ω. Check that your amplifier and system configuration support the intended load.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eWant to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663720546532,"sku":"SL200.65COMP","price":173.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-200-6-5-competition-speakers-01.jpg?v=1792709557"},{"product_id":"pride-solo-300-8-competition-speakers-pair","title":"Pride Solo 300 8 Competition Speakers, 300W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring focused midrange output to a custom car audio system with the Pride Solo 300 8 Competition speaker. This 8-inch model is rated at 300 W RMS per speaker and supplied as a pair, with a 4 Ω impedance and modular construction.\u003c\/p\u003e\n\u003cp\u003eIts hybrid magnetic assembly uses an electrical-steel core. Plan the mounting and crossover for this exact Competition model rather than using dimensions from earlier Solo 300 versions.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 W RMS rating:\u003c\/strong\u003e Match your system settings to the speaker’s stated continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Ω impedance:\u003c\/strong\u003e Use this rating when checking amplifier compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular construction:\u003c\/strong\u003e The serviceable driver format supports custom system planning and repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid magnetic assembly:\u003c\/strong\u003e The magnetic system combines a hybrid design with an electrical-steel core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied:\u003c\/strong\u003e The box contains two Pride Solo 300 8 Competition speakers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eSolo 300 8 Competition \/ SL300.80Comp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power rating\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic system\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic core material\u003c\/td\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum power handling\u003c\/td\u003e\n\u003ctd\u003e600 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e98.5 dB at 1 W \/ 1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer’s high-pass guidance\u003c\/td\u003e\n\u003ctd\u003e140 Hz, depending on power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 inches \/ 44.45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil former\u003c\/td\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone material\u003c\/td\u003e\n\u003ctd\u003ePressed Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDust-cap material\u003c\/td\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurround material\u003c\/td\u003e\n\u003ctd\u003eNomex Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasket finish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent compliance volume (Vas)\u003c\/td\u003e\n\u003ctd\u003e16.5 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree-air resonance (Fs)\u003c\/td\u003e\n\u003ctd\u003e97 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Q (Qms)\u003c\/td\u003e\n\u003ctd\u003e1.77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Q (Qes)\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Q (Qts)\u003c\/td\u003e\n\u003ctd\u003e0.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving mass (Mms)\u003c\/td\u003e\n\u003ctd\u003e16 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical compliance (Cms)\u003c\/td\u003e\n\u003ctd\u003e0.17 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce factor (BL), as listed by Pride\u003c\/td\u003e\n\u003ctd\u003e10.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC resistance (Re)\u003c\/td\u003e\n\u003ctd\u003e3 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e211 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting opening diameter\u003c\/td\u003e\n\u003ctd\u003e189 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting flange height\u003c\/td\u003e\n\u003ctd\u003e15.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting-hole spacing\u003c\/td\u003e\n\u003ctd\u003e202 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Solo 300 8 Competition speakers, a carton and a Pride sticker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eMetal mesh and ABS rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer warning:\u003c\/strong\u003e Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Solo 300 8 Competition combines a defined 300 W RMS rating with a modular driver format for custom car audio builds. Its 4 Ω impedance and published sensitivity give you specific figures to consider when planning system components.\u003c\/p\u003e\n\u003cp\u003ePressed Paper cone and dust-cap materials, a Nomex Cloth surround, and a Kapton voice-coil former identify the materials used in this model. The supplied pair is ready to plan as a two-speaker installation.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eAllow for the 189 mm mounting opening and 211 mm outer diameter when laying out the panel. Also confirm rear clearance and adequate support at the installation location.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer recommends a 140 Hz high-pass crossover, depending on applied power. Set gain with the 300 W RMS rating in mind, and confirm compatible service modules before repair. Metal mesh and ABS rings are not included.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the power rating for each speaker?\u003c\/h3\u003e\n\u003cp\u003eEach speaker has a 300 W RMS rating and 600 W maximum power handling. The manufacturer’s high-pass guidance is 140 Hz, depending on power.\u003c\/p\u003e\n\u003ch3\u003eWhat amplifier impedance should I check?\u003c\/h3\u003e\n\u003cp\u003eThe listed impedance is 4 Ω. Check that your amplifier supports the load in your planned system configuration.\u003c\/p\u003e\n\u003ch3\u003eWhat mounting dimensions should I use?\u003c\/h3\u003e\n\u003cp\u003ePlan for a 189 mm mounting opening, 211 mm outer diameter, 15.5 mm flange height and 202 mm mounting-hole spacing.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one pair of speakers, a carton and a Pride sticker. Metal mesh and ABS rings are not included.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before servicing a speaker?\u003c\/h3\u003e\n\u003cp\u003eCheck that the service module is compatible with the exact Solo 300 8 Competition model before beginning a repair.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eWant to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663729230052,"sku":"SL300.80Comp","price":336.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-300-8-competition-speakers-01.jpg?v=1792709557"},{"product_id":"pride-ruby-voice-6-5-v2-midrange-speakers-pair","title":"Pride Ruby Voice 6.5 v2 Midrange Speakers, 150W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a multi-way car audio system around the Pride Ruby Voice 6.5 v2, a dedicated 6.5-inch midrange speaker pair rated at 150W RMS. Its electrical-steel magnetic core and 4-ohm nominal impedance are key details to consider when planning your system.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS rating:\u003c\/strong\u003e Use the RMS figure when selecting amplifier settings, rather than treating the 300W peak rating as the operating target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-ohm nominal impedance:\u003c\/strong\u003e Check this load against your amplifier’s supported speaker impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-inch nominal size:\u003c\/strong\u003e The listed 165 mm size helps you assess the speaker for your installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical-steel magnetic core:\u003c\/strong\u003e This material is specified for the speaker’s magnetic core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair supplied:\u003c\/strong\u003e The box contains one pair of Ruby Voice 6.5 v2 speakers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ manufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eRuby Voice 6.5 v2 \/ RV.65V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal size\u003c\/th\u003e\n\u003ctd\u003e6.5 inches \/ 165 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal impedance\u003c\/th\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRMS power rating\u003c\/th\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePeak power rating\u003c\/th\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket material\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnetic core material\u003c\/th\u003e\n\u003ctd\u003eElectrical steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e173.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting opening diameter\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting depth\u003c\/th\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer’s high-pass guidance\u003c\/th\u003e\n\u003ctd\u003e100–160 Hz, depending on power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil diameter\u003c\/th\u003e\n\u003ctd\u003e1.5 inches \/ 38.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice-coil former\u003c\/th\u003e\n\u003ctd\u003eKapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone material\u003c\/th\u003e\n\u003ctd\u003ePressed Paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust-cap material\u003c\/th\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurround material\u003c\/th\u003e\n\u003ctd\u003eNomex Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket finish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Q (Qms)\u003c\/th\u003e\n\u003ctd\u003e11.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Q (Qes)\u003c\/th\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal Q (Qts)\u003c\/th\u003e\n\u003ctd\u003e0.63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoving mass (Mms)\u003c\/th\u003e\n\u003ctd\u003e8.1 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical compliance (Cms)\u003c\/th\u003e\n\u003ctd\u003e0.25 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForce factor (BL), as listed by Pride\u003c\/th\u003e\n\u003ctd\u003e5.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone area (Sd)\u003c\/th\u003e\n\u003ctd\u003e149 cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC resistance (Re)\u003c\/th\u003e\n\u003ctd\u003e3.1 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting flange height\u003c\/th\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting screw-hole diameter\u003c\/th\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting-hole spacing\u003c\/th\u003e\n\u003ctd\u003e163 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the box\u003c\/th\u003e\n\u003ctd\u003eOne pair of Pride Ruby Voice 6.5 v2 speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Ruby Voice 6.5 v2 is designed as a midrange driver for a multi-way car audio system. Its listed power rating, impedance, and mounting measurements give you concrete details to consider when matching it to your system and installation.\u003c\/p\u003e\n\u003cp\u003eThe pressed-paper cone, paper dust cap, and Nomex Cloth surround are specified alongside the steel basket and electrical-steel magnetic core. These construction details help you assess the speaker’s design as you plan your component choices.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck the 150 mm mounting opening, 173.5 mm outer diameter, and 64 mm mounting depth against your available space. Also account for the 163 mm mounting-hole spacing and 4.2 mm screw-hole diameter.\u003c\/p\u003e\n\u003cp\u003eUse appropriate high-pass filtering and set amplifier gain for the 150W RMS rating, not the 300W peak figure. Pride’s high-pass guidance is 100–160 Hz depending on power; consult the manufacturer’s current installation guidance for crossover and response-range planning.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs this a full-range speaker?\u003c\/h3\u003e\n\u003cp\u003eThe Ruby Voice 6.5 v2 is identified as a dedicated midrange driver for a multi-way car audio system.\u003c\/p\u003e\n\u003ch3\u003eShould I use the RMS or peak rating when setting amplifier gain?\u003c\/h3\u003e\n\u003cp\u003eUse the 150W RMS rating when setting amplifier gain. The listed peak rating is 300W.\u003c\/p\u003e\n\u003ch3\u003eWhat high-pass setting does Pride recommend?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer’s listed guidance is 100–160 Hz, depending on power. Check current manufacturer guidance when designing your crossover.\u003c\/p\u003e\n\u003ch3\u003eWhat mounting space should I allow?\u003c\/h3\u003e\n\u003cp\u003eCheck the 150 mm mounting opening and 64 mm mounting depth, along with the outer diameter and mounting-hole measurements listed above.\u003c\/p\u003e\n\u003ch3\u003eHow many speakers are included?\u003c\/h3\u003e\n\u003cp\u003eThe box contains one pair of Pride Ruby Voice 6.5 v2 speakers.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexplore the Pride brand profile\u003c\/a\u003e to learn more about the brand.\u003c\/p\u003e\n\u003cp\u003eManufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663767765220,"sku":"RV.65V2","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-rv-65v2-speaker-01.jpg?v=1792709558"},{"product_id":"pride-solo-40-2-5-inch-horn-tweeters-pair","title":"Pride Solo 40 2.5\" Horn Tweeters, 40W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Pride Solo 40 is a 2.5-inch car audio horn tweeter for the high-frequency section of your system. It pairs a copper-wire voice coil and neodymium magnet with a 40 W RMS rating at 4 Ω.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn-tweeter design:\u003c\/strong\u003e Adds a dedicated component for the high-frequency section of your car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-inch nominal size:\u003c\/strong\u003e Check the mounting space and rear clearance before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-wire voice coil:\u003c\/strong\u003e A specified component of the Solo 40’s construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnet:\u003c\/strong\u003e A specified component of the tweeter’s magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded passive-filter capacitors:\u003c\/strong\u003e Two X-Cap Hi-Fi film capacitors are included for passive filtering.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ manufacturer SKU\u003c\/td\u003e\n\u003ctd\u003eSolo 40 \/ SL.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal size\u003c\/td\u003e\n\u003ctd\u003e2.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power rating\u003c\/td\u003e\n\u003ctd\u003e40 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e3.5–20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoice-coil winding material\u003c\/td\u003e\n\u003ctd\u003eCopper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet material\u003c\/td\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003eOne pair of Pride Solo 40 horn tweeters, two X-Cap Hi-Fi film capacitors and a carton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Solo 40 combines a horn-tweeter format with a stated 40 W RMS rating and 4 Ω impedance. Its published 3.5–20 kHz frequency response helps you assess its intended high-frequency role when planning a car audio system.\u003c\/p\u003e\n\u003cp\u003eThe included X-Cap Hi-Fi film capacitors provide passive-filter components to consider when designing the system’s high-pass filtering.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse a suitable high-pass crossover and confirm that its filter design matches the intended power level. The 3.5 kHz response limit is not a full-power crossover setting.\u003c\/p\u003e\n\u003cp\u003eCheck the 64 mm outer diameter, mounting dimensions and required rear clearance against your installation space before fitting the tweeters.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Pride Solo 40’s RMS power rating and impedance?\u003c\/h3\u003e\n\u003cp\u003eIt is rated at 40 W RMS with a 4 Ω impedance.\u003c\/p\u003e\n\u003ch3\u003eDoes the 3.5 kHz response limit specify the crossover setting?\u003c\/h3\u003e\n\u003cp\u003eNo. Use a suitable high-pass crossover and confirm its filter design for the intended power level.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eConfirm the mounting dimensions and rear clearance available at the intended location.\u003c\/p\u003e\n\u003ch3\u003eWhat is included with the pair?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one pair of Solo 40 horn tweeters, two X-Cap Hi-Fi film capacitors and a carton.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Pride Solo 40 at 12 Volt Outlet. Want to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663775564004,"sku":"SL.40","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-40-horn-tweeters-01.jpg?v=1792708859"},{"product_id":"pride-solo-60-3-2-inch-horn-tweeters-pair","title":"Pride Solo 60 3.2\" Horn Tweeters, 60W RMS (Pair)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eAdd a dedicated high-frequency driver to your component car audio system with the Pride Solo 60 horn tweeters. This pair uses a 3.2-inch horn-tweeter format, neodymium magnets and a 60 W RMS rating.\u003c\/p\u003e\n\u003cp\u003eTwo X-Cap Hi-Fi film capacitors are included for passive filtering. The 4 Ω impedance is an important detail to check against your system’s requirements.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn-tweeter format:\u003c\/strong\u003e The nominal 3.2-inch size identifies the driver format for planning your installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 W RMS rating:\u003c\/strong\u003e This gives you a stated power rating to consider when matching your audio components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Ω impedance:\u003c\/strong\u003e Check this load against the equipment connected to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium magnets:\u003c\/strong\u003e The magnetic assembly serves the high-frequency section of a component car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive-filter capacitors:\u003c\/strong\u003e The pair includes two X-Cap Hi-Fi film capacitors for passive filtering.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel \/ manufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eSolo 60 \/ SL.60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal size\u003c\/th\u003e\n\u003ctd\u003e3.2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRMS power rating\u003c\/th\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpedance\u003c\/th\u003e\n\u003ctd\u003e4 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet material\u003c\/th\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the box\u003c\/th\u003e\n\u003ctd\u003eOne pair of Pride Solo 60 horn tweeters, two X-Cap Hi-Fi film capacitors and a carton.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe Solo 60 is designed for the high-frequency section of a component car audio system. Its stated power rating, impedance and included filtering capacitors give you key details to consider when planning how the tweeters fit into your system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the mounting space:\u003c\/strong\u003e Confirm the outer diameter, mounting cutout and rear clearance before ordering or cutting a panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlan the filtering:\u003c\/strong\u003e Use appropriate high-pass filtering and confirm the crossover requirements for your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the load:\u003c\/strong\u003e Account for the tweeter’s 4 Ω impedance when reviewing connected equipment.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the 60 W RMS rating mean?\u003c\/h3\u003e\n\u003cp\u003eIt is the published RMS power rating for the Pride Solo 60 tweeters.\u003c\/p\u003e\n\u003ch3\u003eWhat impedance should I account for?\u003c\/h3\u003e\n\u003cp\u003eThese tweeters have a 4 Ω impedance. Check that against your system’s requirements.\u003c\/p\u003e\n\u003ch3\u003eWhat should I measure before installation?\u003c\/h3\u003e\n\u003cp\u003eCheck the outer diameter, mounting cutout and rear clearance at your intended mounting location.\u003c\/p\u003e\n\u003ch3\u003eWhat is included with the pair?\u003c\/h3\u003e\n\u003cp\u003eThe listing includes one pair of tweeters, two X-Cap Hi-Fi film capacitors and a carton.\u003c\/p\u003e\n\u003ch3\u003eWhat filtering should I use?\u003c\/h3\u003e\n\u003cp\u003eUse appropriate high-pass filtering and confirm the crossover requirements for your system before installation.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eWant to learn more about Pride? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/pride-car-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePride brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Pride Audio","offers":[{"title":"Default Title","offer_id":67663789195492,"sku":"SL.60","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/pride-solo-60-horn-tweeters-01.jpg?v=1792708859"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/pride-e-25-01.jpg?v=1792692559","url":"https:\/\/www.12voltoutlet.com\/collections\/pride-audio.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}