{"title":"Quick Disconnects","description":"\u003ch2\u003eMatch the blade interface as well as the wire\u003c\/h2\u003e\n\u003cp\u003eQuick disconnect terminals connect wiring to a matching flat tab or receptacle. They are useful where a connection must separate without cutting out a crimped splice. This Install Bay range uses vinyl insulation, with different wire sizes and tab widths that should be checked independently.\u003c\/p\u003e\n\u003ch3\u003eFemale receptacles and male tabs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed female terminals, 22–18 AWG:\u003c\/strong\u003e RVFD110, RVFD187, RVFD205 and RVFD250 provide .110, .187, .205 and .250-inch nominal tab sizes respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue female terminals, 16–14 AWG:\u003c\/strong\u003e BVFD110, BVFD187, BVFD205 and BVFD250 cover those same four nominal tab sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow female terminals, 12–10 AWG:\u003c\/strong\u003e YVFD250 uses a .250-inch interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale terminals:\u003c\/strong\u003e BVMD250 is blue for 16–14 AWG and YVMD250 is yellow for 12–10 AWG. Both have .250-inch nominal tabs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery listing in this selection contains 100 individual terminals. Male and female packs are separate, so order the required side when replacing an existing connection, or both sides when assembling a new compatible pair.\u003c\/p\u003e\n\u003ch3\u003eQuick disconnect questions\u003c\/h3\u003e\n\u003ch4\u003eAre .187-inch and .205-inch terminals interchangeable?\u003c\/h4\u003e\n\u003cp\u003eThey are different nominal sizes. Measure or confirm the equipment's tab specification rather than choosing the closest-looking connector. Width alone also does not establish compatibility with every manufacturer's terminal.\u003c\/p\u003e\n\u003ch4\u003eDoes a blue terminal always fit another blue terminal?\u003c\/h4\u003e\n\u003cp\u003eBlue identifies the stated 16–14 AWG wire range here. The female connectors still have four different interface sizes, so color cannot replace a dimension check.\u003c\/p\u003e\n\u003ch4\u003eAre these nylon or fully sealed connectors?\u003c\/h4\u003e\n\u003cp\u003eThese listings specify vinyl insulation and do not establish a waterproof seal. Check the individual product image and specifications for coverage and fit, and follow the equipment's connection requirements.\u003c\/p\u003e","products":[{"product_id":"install-bay-rvfd110","title":"Install Bay RVFD110 Red Vinyl Female Quick Disconnects, 22-18 AWG, .110 in, 100 Pack","description":"\u003ch2\u003eRVFD110 female quick disconnects with .110-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay RVFD110 female quick disconnect terminals. This red vinyl-insulated version accepts 22-18 AWG wire and is sized to receive a matching .110-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .110-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 22-18 AWG conductor for this red vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical RVFD110 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRVFD110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22-18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.110 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .110 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 22-18 AWG wire in the crimp end and a compatible .110-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 22-18 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with RVFD110?\u003c\/h3\u003e\u003cp\u003eA compatible .110-inch male terminal. The .110-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay RVFD110 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses red vinyl insulation. Its wire range is 22-18 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146620644,"sku":"RVFD110","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rvfd110.jpg?v=1792776687"},{"product_id":"install-bay-rvfd187","title":"Install Bay RVFD187 Red Vinyl Female Quick Disconnects, 22-18 AWG, .187 in, 100 Pack","description":"\u003ch2\u003eRVFD187 female quick disconnects with .187-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay RVFD187 female quick disconnect terminals. This red vinyl-insulated version accepts 22-18 AWG wire and is sized to receive a matching .187-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .187-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 22-18 AWG conductor for this red vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical RVFD187 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRVFD187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22-18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.187 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .187 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 22-18 AWG wire in the crimp end and a compatible .187-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 22-18 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with RVFD187?\u003c\/h3\u003e\u003cp\u003eA compatible .187-inch male terminal. The .187-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay RVFD187 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses red vinyl insulation. Its wire range is 22-18 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146653412,"sku":"RVFD187","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rvfd187.jpg?v=1792776687"},{"product_id":"install-bay-rvfd205","title":"Install Bay RVFD205 Red Vinyl Female Quick Disconnects, 22-18 AWG, .205 in, 100 Pack","description":"\u003ch2\u003eRVFD205 female quick disconnects with .205-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay RVFD205 female quick disconnect terminals. This red vinyl-insulated version accepts 22-18 AWG wire and is sized to receive a matching .205-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .205-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 22-18 AWG conductor for this red vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical RVFD205 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRVFD205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22-18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.205 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .205 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 22-18 AWG wire in the crimp end and a compatible .205-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 22-18 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with RVFD205?\u003c\/h3\u003e\u003cp\u003eA compatible .205-inch male terminal. The .205-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay RVFD205 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses red vinyl insulation. Its wire range is 22-18 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146686180,"sku":"RVFD205","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rvfd205.jpg?v=1792776687"},{"product_id":"install-bay-rvfd250","title":"Install Bay RVFD250 Red Vinyl Female Quick Disconnects, 22-18 AWG, .250 in, 100 Pack","description":"\u003ch2\u003eRVFD250 female quick disconnects with .250-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay RVFD250 female quick disconnect terminals. This red vinyl-insulated version accepts 22-18 AWG wire and is sized to receive a matching .250-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .250-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 22-18 AWG conductor for this red vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical RVFD250 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eRVFD250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22-18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .250 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 22-18 AWG wire in the crimp end and a compatible .250-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 22-18 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with RVFD250?\u003c\/h3\u003e\u003cp\u003eA compatible .250-inch male terminal. The .250-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay RVFD250 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses red vinyl insulation. Its wire range is 22-18 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146784484,"sku":"RVFD250","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-rvfd250.jpg?v=1792776681"},{"product_id":"install-bay-bvfd110","title":"Install Bay BVFD110 Blue Vinyl Female Quick Disconnects, 16-14 AWG, .110 in, 100 Pack","description":"\u003ch2\u003eBVFD110 female quick disconnects with .110-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay BVFD110 female quick disconnect terminals. This blue vinyl-insulated version accepts 16-14 AWG wire and is sized to receive a matching .110-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .110-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 16-14 AWG conductor for this blue vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical BVFD110 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBVFD110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.110 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .110 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 16-14 AWG wire in the crimp end and a compatible .110-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 16-14 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with BVFD110?\u003c\/h3\u003e\u003cp\u003eA compatible .110-inch male terminal. The .110-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay BVFD110 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses blue vinyl insulation. Its wire range is 16-14 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146882788,"sku":"BVFD110","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bvfd110.jpg?v=1792776684"},{"product_id":"install-bay-bvfd187","title":"Install Bay BVFD187 Blue Vinyl Female Quick Disconnects, 16-14 AWG, .187 in, 100 Pack","description":"\u003ch2\u003eBVFD187 female quick disconnects with .187-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay BVFD187 female quick disconnect terminals. This blue vinyl-insulated version accepts 16-14 AWG wire and is sized to receive a matching .187-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .187-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 16-14 AWG conductor for this blue vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical BVFD187 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBVFD187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.187 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .187 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 16-14 AWG wire in the crimp end and a compatible .187-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 16-14 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with BVFD187?\u003c\/h3\u003e\u003cp\u003eA compatible .187-inch male terminal. The .187-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay BVFD187 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses blue vinyl insulation. Its wire range is 16-14 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147013860,"sku":"BVFD187","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bvfd187.jpg?v=1792776684"},{"product_id":"install-bay-bvfd205","title":"Install Bay BVFD205 Blue Vinyl Female Quick Disconnects, 16-14 AWG, .205 in, 100 Pack","description":"\u003ch2\u003eBVFD205 female quick disconnects with .205-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay BVFD205 female quick disconnect terminals. This blue vinyl-insulated version accepts 16-14 AWG wire and is sized to receive a matching .205-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .205-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 16-14 AWG conductor for this blue vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical BVFD205 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBVFD205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.205 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .205 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 16-14 AWG wire in the crimp end and a compatible .205-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 16-14 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with BVFD205?\u003c\/h3\u003e\u003cp\u003eA compatible .205-inch male terminal. The .205-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay BVFD205 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses blue vinyl insulation. Its wire range is 16-14 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147276004,"sku":"BVFD205","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bvfd205.jpg?v=1792776685"},{"product_id":"install-bay-bvfd250","title":"Install Bay BVFD250 Blue Vinyl Female Quick Disconnects, 16-14 AWG, .250 in, 100 Pack","description":"\u003ch2\u003eBVFD250 female quick disconnects with .250-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay BVFD250 female quick disconnect terminals. This blue vinyl-insulated version accepts 16-14 AWG wire and is sized to receive a matching .250-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .250-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 16-14 AWG conductor for this blue vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical BVFD250 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBVFD250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .250 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 16-14 AWG wire in the crimp end and a compatible .250-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 16-14 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with BVFD250?\u003c\/h3\u003e\u003cp\u003eA compatible .250-inch male terminal. The .250-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay BVFD250 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses blue vinyl insulation. Its wire range is 16-14 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147308772,"sku":"BVFD250","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bvfd250.jpg?v=1792776715"},{"product_id":"install-bay-yvfd250","title":"Install Bay YVFD250 Yellow Vinyl Female Quick Disconnects, 12-10 AWG, .250 in, 100 Pack","description":"\u003ch2\u003eYVFD250 female quick disconnects with .250-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay YVFD250 female quick disconnect terminals. This yellow vinyl-insulated version accepts 12-10 AWG wire and is sized to receive a matching .250-inch male blade. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The female end accepts a matching male terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .250-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 12-10 AWG conductor for this yellow vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical YVFD250 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eYVFD250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12-10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eMale, matching .250 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 female quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 12-10 AWG wire in the crimp end and a compatible .250-inch male terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 12-10 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies female terminals only; it does not include the mating male terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with YVFD250?\u003c\/h3\u003e\u003cp\u003eA compatible .250-inch male terminal. The .250-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 female Install Bay YVFD250 quick disconnects. Choose the matching male terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses yellow vinyl insulation. Its wire range is 12-10 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147570916,"sku":"YVFD250","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-yvfd250.jpg?v=1792776716"},{"product_id":"install-bay-bvmd250","title":"Install Bay BVMD250 Blue Vinyl Male Quick Disconnects, 16-14 AWG, .250 in, 100 Pack","description":"\u003ch2\u003eBVMD250 male quick disconnects with .250-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay BVMD250 male quick disconnect terminals. This blue vinyl-insulated version accepts 16-14 AWG wire and is sized to connect to a matching .250-inch female terminal. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The male end mates with a matching female terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .250-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 16-14 AWG conductor for this blue vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical BVMD250 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eBVMD250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eFemale, matching .250 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 male quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 16-14 AWG wire in the crimp end and a compatible .250-inch female terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 16-14 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies male terminals only; it does not include the mating female terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with BVMD250?\u003c\/h3\u003e\u003cp\u003eA compatible .250-inch female terminal. The .250-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 male Install Bay BVMD250 quick disconnects. Choose the matching female terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses blue vinyl insulation. Its wire range is 16-14 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 warning\u003c\/h2\u003e\u003cp\u003eWARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information, visit \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147603684,"sku":"BVMD250","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-bvmd250.jpg?v=1792776715"},{"product_id":"install-bay-yvmd250","title":"Install Bay YVMD250 Yellow Vinyl Male Quick Disconnects, 12-10 AWG, .250 in, 100 Pack","description":"\u003ch2\u003eYVMD250 male quick disconnects with .250-inch fit\u003c\/h2\u003e\u003cp\u003eMake a connection that can be separated for service with Install Bay YVMD250 male quick disconnect terminals. This yellow vinyl-insulated version accepts 12-10 AWG wire and is sized to connect to a matching .250-inch female terminal. The package contains 100 terminals of the same gender and size, so you can replenish the exact part your installation requires.\u003c\/p\u003e\u003ch2\u003eWhy choose this quick disconnect\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparable terminal format:\u003c\/strong\u003e The male end mates with a matching female terminal, providing a separable connection for equipment that may need to be disconnected for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified mating size:\u003c\/strong\u003e The .250-inch blade width distinguishes this terminal from other quick-disconnect sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined wire range:\u003c\/strong\u003e Select 12-10 AWG conductor for this yellow vinyl-insulated terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-piece supply:\u003c\/strong\u003e Each pack contains identical YVMD250 terminals rather than a mixed-size or mixed-gender assortment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eYVMD250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal style\u003c\/th\u003e\n\u003ctd\u003eQuick disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTerminal gender\u003c\/th\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12-10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal blade width\u003c\/th\u003e\n\u003ctd\u003e.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMating terminal\u003c\/th\u003e\n\u003ctd\u003eFemale, matching .250 in size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation material\u003c\/th\u003e\n\u003ctd\u003eVinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation color\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 male quick disconnect terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eChoosing a compatible wire and mating terminal\u003c\/h2\u003e\u003cp\u003eMatch both sides of the connection: use 12-10 AWG wire in the crimp end and a compatible .250-inch female terminal at the disconnect end. Blade width and wire gauge describe different dimensions. A matching color alone does not establish mating compatibility; confirm the terminal’s width, gender and physical fit against the equipment or mating connector specifications.\u003c\/p\u003e\u003cp\u003eDe-energize the circuit before installation or disconnection. Prepare the wire and crimp with a tool suitable for the terminal and 12-10 AWG wire, following the tool and equipment instructions. Check the crimp and mating fit before returning the circuit to service. This pack supplies male terminals only; it does not include the mating female terminals or wire.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat size terminal mates with YVMD250?\u003c\/h3\u003e\u003cp\u003eA compatible .250-inch female terminal. The .250-inch dimension is the nominal blade width; verify the complete mating fit for your equipment.\u003c\/p\u003e\u003ch3\u003eDoes this pack include both male and female terminals?\u003c\/h3\u003e\u003cp\u003eNo. It contains 100 male Install Bay YVMD250 quick disconnects. Choose the matching female terminal separately when needed.\u003c\/p\u003e\u003ch3\u003eIs the insulation nylon or vinyl?\u003c\/h3\u003e\u003cp\u003eThis model uses yellow vinyl insulation. Its wire range is 12-10 AWG.\u003c\/p\u003e\u003ch3\u003eCan these be used as a sealed connection?\u003c\/h3\u003e\u003cp\u003eNo waterproof or environmental sealing rating is listed in the available specifications. If the connection will be exposed to moisture, choose a connection system with the required documented protection rather than assuming the vinyl insulation provides a seal.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808147636452,"sku":"YVMD250","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-yvmd250.jpg?v=1792776716"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/install-bay-bvfd250.jpg?v=1792778534","url":"https:\/\/www.12voltoutlet.com\/collections\/quick-disconnects.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}