{"title":"Snow Caps","description":"\u003ch2\u003eClosed-end crimp caps for wire joints\u003c\/h2\u003e\n\u003cp\u003eSnow caps, also called closed-end crimp caps, enclose wire ends brought together from the same direction. The Install Bay nylon caps in this collection form permanent crimped connections. Their flared entry helps guide stranded conductors into the cap during preparation.\u003c\/p\u003e\n\u003ch3\u003eChoose the gauge, neck style and quantity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCC2218:\u003c\/strong\u003e 22–18 AWG nylon crimp caps, 100 pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCL1614:\u003c\/strong\u003e 16–14 AWG long-neck nylon crimp caps, 100 pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCL1614-1:\u003c\/strong\u003e the 16–14 AWG long-neck option in a 1,000-piece package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCLB1614:\u003c\/strong\u003e black 16–14 AWG long-neck nylon crimp caps, 100 pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCC1210:\u003c\/strong\u003e 12–10 AWG nylon crimp caps, 100 pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStart with the conductor combination and required connector shape, then choose the pack size. The black CCLB1614 offers a different appearance while keeping the stated 16–14 AWG range. Do not assume that every cap can accept any number of wires simply because their individual gauges match the label.\u003c\/p\u003e\n\u003ch3\u003eSnow cap questions\u003c\/h3\u003e\n\u003ch4\u003eAre these twist-on wire nuts?\u003c\/h4\u003e\n\u003cp\u003eThese are crimp connectors and require an appropriate crimping tool. Confirm the wire combination and follow the connector's fitting instructions rather than installing them as twist-on caps.\u003c\/p\u003e\n\u003ch4\u003eWhen would I choose a butt connector instead?\u003c\/h4\u003e\n\u003cp\u003eA butt connector accepts wire ends from opposite directions for an inline splice. A closed-end cap brings the wire ends together through one opening, which changes how the finished joint sits in the harness.\u003c\/p\u003e\n\u003ch4\u003eDoes the closed end make the connection waterproof?\u003c\/h4\u003e\n\u003cp\u003eA closed-end shape does not establish a waterproof rating. Check environmental protection separately, inspect the finished crimp and support the wiring so the connection is not carrying cable strain.\u003c\/p\u003e","products":[{"product_id":"install-bay-cc2218","title":"Install Bay CC2218 22–18 AWG Nylon Crimp Caps – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Install Bay CC2218 is a closed-end nylon crimp cap for 22–18 AWG wiring. Supplied in a 100-piece package, it provides a permanent crimp connection for wire ends brought together inside the cap, rather than an inline splice or a removable disconnect.\u003c\/p\u003e\u003cp\u003eA flared entry skirt helps guide stranded conductors into the connector instead of allowing strands to fold back during insertion. The manufacturer specifies nylon insulation with resistance to chemicals and corrosion.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e22–18 AWG size designation for wire selection.\u003c\/li\u003e\n\u003cli\u003eClosed-end crimp format for a permanent connection.\u003c\/li\u003e\n\u003cli\u003eFlared entry helps guide wire strands into the cap.\u003c\/li\u003e\n\u003cli\u003e100 connectors per package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCC2218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eClosed-end crimp cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e22–18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNeck style\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck that the conductors and their combined bundle fit the connector’s 22–18 AWG specification; do not force an oversized bundle into the cap. Prepare the conductor ends, use a crimp tool suited to the cap, and inspect the completed joint with power disconnected. The nylon cap is not a documented waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a twist-on wire nut?\u003c\/h3\u003e\u003cp\u003eNo. This is a crimp-cap connector that forms a permanent joint with an appropriate crimping tool.\u003c\/p\u003e\u003ch3\u003eIs it an inline butt connector?\u003c\/h3\u003e\u003cp\u003eNo. The wire ends enter the closed-end cap from the same side. An inline butt connector accepts wire from opposite ends.\u003c\/p\u003e\u003ch3\u003eHow many caps are included?\u003c\/h3\u003e\u003cp\u003eOne package contains 100 individual CC2218 connectors.\u003c\/p\u003e\u003ch3\u003eWhat does the gauge designation mean?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies 22–18 AWG. Check the actual conductor combination and connector fit rather than assuming any number of wires of that gauge will fit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808145047780,"sku":"CC2218","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-cc2218.jpg?v=1792776656"},{"product_id":"install-bay-ccl1614","title":"Install Bay CCL1614 16–14 AWG Long Neck Nylon Crimp Caps – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Install Bay CCL1614 is a closed-end nylon crimp cap for 16–14 AWG wiring. Supplied in a 100-piece package, it provides a permanent crimp connection for wire ends brought together inside the cap, rather than an inline splice or a removable disconnect.\u003c\/p\u003e\u003cp\u003eA flared entry skirt helps guide stranded conductors into the connector instead of allowing strands to fold back during insertion. The manufacturer specifies nylon insulation with resistance to chemicals and corrosion. The long-neck design is a distinguishing feature of this part; choose it when that connector shape is required for the installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG size designation for wire selection.\u003c\/li\u003e\n\u003cli\u003eClosed-end crimp format for a permanent connection.\u003c\/li\u003e\n\u003cli\u003eFlared entry helps guide wire strands into the cap.\u003c\/li\u003e\n\u003cli\u003e100 connectors per package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCCL1614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eClosed-end crimp cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNeck style\u003c\/th\u003e\n\u003ctd\u003eLong neck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck that the conductors and their combined bundle fit the connector’s 16–14 AWG specification; do not force an oversized bundle into the cap. Prepare the conductor ends, use a crimp tool suited to the cap, and inspect the completed joint with power disconnected. The nylon cap is not a documented waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a twist-on wire nut?\u003c\/h3\u003e\u003cp\u003eNo. This is a crimp-cap connector that forms a permanent joint with an appropriate crimping tool.\u003c\/p\u003e\u003ch3\u003eIs it an inline butt connector?\u003c\/h3\u003e\u003cp\u003eNo. The wire ends enter the closed-end cap from the same side. An inline butt connector accepts wire from opposite ends.\u003c\/p\u003e\u003ch3\u003eHow many caps are included?\u003c\/h3\u003e\u003cp\u003eOne package contains 100 individual CCL1614 connectors.\u003c\/p\u003e\u003ch3\u003eWhat does the gauge designation mean?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies 16–14 AWG. Check the actual conductor combination and connector fit rather than assuming any number of wires of that gauge will fit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808145146084,"sku":"CCL1614","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-ccl1614.jpg?v=1792776650"},{"product_id":"install-bay-ccl1614-1","title":"Install Bay CCL1614-1 16–14 AWG Long Neck Nylon Crimp Caps – 1,000 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Install Bay CCL1614-1 is a closed-end nylon crimp cap for 16–14 AWG wiring. Supplied in a 1,000-piece package, it provides a permanent crimp connection for wire ends brought together inside the cap, rather than an inline splice or a removable disconnect.\u003c\/p\u003e\u003cp\u003eA flared entry skirt helps guide stranded conductors into the connector instead of allowing strands to fold back during insertion. The manufacturer specifies nylon insulation with resistance to chemicals and corrosion. The long-neck design is a distinguishing feature of this part; choose it when that connector shape is required for the installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG size designation for wire selection.\u003c\/li\u003e\n\u003cli\u003eClosed-end crimp format for a permanent connection.\u003c\/li\u003e\n\u003cli\u003eFlared entry helps guide wire strands into the cap.\u003c\/li\u003e\n\u003cli\u003e1,000 connectors per package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCCL1614-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eClosed-end crimp cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNeck style\u003c\/th\u003e\n\u003ctd\u003eLong neck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1,000 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck that the conductors and their combined bundle fit the connector’s 16–14 AWG specification; do not force an oversized bundle into the cap. Prepare the conductor ends, use a crimp tool suited to the cap, and inspect the completed joint with power disconnected. The nylon cap is not a documented waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a twist-on wire nut?\u003c\/h3\u003e\u003cp\u003eNo. This is a crimp-cap connector that forms a permanent joint with an appropriate crimping tool.\u003c\/p\u003e\u003ch3\u003eIs it an inline butt connector?\u003c\/h3\u003e\u003cp\u003eNo. The wire ends enter the closed-end cap from the same side. An inline butt connector accepts wire from opposite ends.\u003c\/p\u003e\u003ch3\u003eHow many caps are included?\u003c\/h3\u003e\u003cp\u003eOne package contains 1,000 individual CCL1614-1 connectors.\u003c\/p\u003e\u003ch3\u003eWhat does the gauge designation mean?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies 16–14 AWG. Check the actual conductor combination and connector fit rather than assuming any number of wires of that gauge will fit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808145178852,"sku":"CCL1614-1","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-ccl1614-1.jpg?v=1792776656"},{"product_id":"install-bay-cclb1614","title":"Install Bay CCLB1614 Black 16–14 AWG Long Neck Nylon Crimp Caps – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Install Bay CCLB1614 is a closed-end nylon crimp cap for 16–14 AWG wiring. Supplied in a 100-piece package, it provides a permanent crimp connection for wire ends brought together inside the cap, rather than an inline splice or a removable disconnect.\u003c\/p\u003e\u003cp\u003eA flared entry skirt helps guide stranded conductors into the connector instead of allowing strands to fold back during insertion. The manufacturer specifies nylon insulation with resistance to chemicals and corrosion. The long-neck design is a distinguishing feature of this part; choose it when that connector shape is required for the installation. Black insulation provides a different appearance from the other caps in this range without changing the stated 16–14 AWG selection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16–14 AWG size designation for wire selection.\u003c\/li\u003e\n\u003cli\u003eClosed-end crimp format for a permanent connection.\u003c\/li\u003e\n\u003cli\u003eFlared entry helps guide wire strands into the cap.\u003c\/li\u003e\n\u003cli\u003e100 connectors per package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCCLB1614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eClosed-end crimp cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e16–14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNeck style\u003c\/th\u003e\n\u003ctd\u003eLong neck\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck that the conductors and their combined bundle fit the connector’s 16–14 AWG specification; do not force an oversized bundle into the cap. Prepare the conductor ends, use a crimp tool suited to the cap, and inspect the completed joint with power disconnected. The nylon cap is not a documented waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a twist-on wire nut?\u003c\/h3\u003e\u003cp\u003eNo. This is a crimp-cap connector that forms a permanent joint with an appropriate crimping tool.\u003c\/p\u003e\u003ch3\u003eIs it an inline butt connector?\u003c\/h3\u003e\u003cp\u003eNo. The wire ends enter the closed-end cap from the same side. An inline butt connector accepts wire from opposite ends.\u003c\/p\u003e\u003ch3\u003eHow many caps are included?\u003c\/h3\u003e\u003cp\u003eOne package contains 100 individual CCLB1614 connectors.\u003c\/p\u003e\u003ch3\u003eWhat does the gauge designation mean?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies 16–14 AWG. Check the actual conductor combination and connector fit rather than assuming any number of wires of that gauge will fit.\u003c\/p\u003e\u003ch2\u003eCalifornia Proposition 65 Warning\u003c\/h2\u003e\u003cp\u003eThis product can expose you to Di (2-ethylhexyl)phthalate (DEHP) , which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e .\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808145244388,"sku":"CCLB1614","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-cclb1614.jpg?v=1792776687"},{"product_id":"install-bay-cc1210","title":"Install Bay CC1210 12–10 AWG Nylon Crimp Caps – 100 Pack","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Install Bay CC1210 is a closed-end nylon crimp cap for 12–10 AWG wiring. Supplied in a 100-piece package, it provides a permanent crimp connection for wire ends brought together inside the cap, rather than an inline splice or a removable disconnect.\u003c\/p\u003e\u003cp\u003eA flared entry skirt helps guide stranded conductors into the connector instead of allowing strands to fold back during insertion. The manufacturer specifies nylon insulation with resistance to chemicals and corrosion.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e12–10 AWG size designation for wire selection.\u003c\/li\u003e\n\u003cli\u003eClosed-end crimp format for a permanent connection.\u003c\/li\u003e\n\u003cli\u003eFlared entry helps guide wire strands into the cap.\u003c\/li\u003e\n\u003cli\u003e100 connectors per package.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInstall Bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCC1210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnector style\u003c\/th\u003e\n\u003ctd\u003eClosed-end crimp cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire size\u003c\/th\u003e\n\u003ctd\u003e12–10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInsulation\u003c\/th\u003e\n\u003ctd\u003eNylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNeck style\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e100 connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSelection and Installation Notes\u003c\/h2\u003e\u003cp\u003eCheck that the conductors and their combined bundle fit the connector’s 12–10 AWG specification; do not force an oversized bundle into the cap. Prepare the conductor ends, use a crimp tool suited to the cap, and inspect the completed joint with power disconnected. The nylon cap is not a documented waterproof or adhesive-lined heat-shrink seal.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eIs this a twist-on wire nut?\u003c\/h3\u003e\u003cp\u003eNo. This is a crimp-cap connector that forms a permanent joint with an appropriate crimping tool.\u003c\/p\u003e\u003ch3\u003eIs it an inline butt connector?\u003c\/h3\u003e\u003cp\u003eNo. The wire ends enter the closed-end cap from the same side. An inline butt connector accepts wire from opposite ends.\u003c\/p\u003e\u003ch3\u003eHow many caps are included?\u003c\/h3\u003e\u003cp\u003eOne package contains 100 individual CC1210 connectors.\u003c\/p\u003e\u003ch3\u003eWhat does the gauge designation mean?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies 12–10 AWG. Check the actual conductor combination and connector fit rather than assuming any number of wires of that gauge will fit.\u003c\/p\u003e","brand":"InstallBay","offers":[{"title":"Default Title","offer_id":67808146555108,"sku":"CC1210","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/install-bay-cc1210.jpg?v=1792776687"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/install-bay-ccl1614.jpg?v=1792778537","url":"https:\/\/www.12voltoutlet.com\/collections\/snow-caps.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}