{"title":"Timpano Audio","description":"\u003ch2\u003eTimpano TPT Car Audio Amplifiers\u003c\/h2\u003e\u003cp\u003eExplore Timpano TPT-BASS and full-range monoblock amplifiers. These model families serve different frequency-range requirements, and some amplifiers are listed in separate impedance versions.\u003c\/p\u003e\u003ch3\u003eChoose the right equipment\u003c\/h3\u003e\u003cp\u003eCheck whether the exact amplifier is intended for bass or full-range use, then match its minimum supported impedance to the final speaker load. Compare rated output, input connections and physical size, and plan the electrical system and installation wiring accordingly.\u003c\/p\u003e","products":[{"product_id":"timpano-tpt-3000-1-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-3000 1 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a high-output car audio system around the Timpano TPT-3000 1 Ohm full-range monoblock amplifier. Its Class D design, single channel, and broad frequency response support compatible speaker applications beyond bass-only setups.\u003c\/p\u003e\n\u003cp\u003eAdjustable high-pass and low-pass filters let you tune the signal for your system, while power ratings are specified at different supply voltages and speaker loads.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-range output:\u003c\/strong\u003e The 10 Hz–20 kHz response supports compatible subwoofer, speaker, or driver systems with suitable crossover settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter adjustment:\u003c\/strong\u003e High-pass and low-pass controls help tailor the output to the connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable gain:\u003c\/strong\u003e Adjust the amplifier’s input level to align with the source signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem protection:\u003c\/strong\u003e Built-in thermal and short-circuit protection help protect the amplifier during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact chassis:\u003c\/strong\u003e The heat-sink design measures 9.36 × 7.46 × 3.05 inches for installation planning.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e3,350 W × 1 at 1 ohm; 2,100 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e3,000 W × 1 at 1 ohm; 2,000 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–16 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–700 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e90 Hz–20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 7.46 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEqualization\u003c\/th\u003e\n\u003ctd\u003eMid-bass: 0 to +12 dB at 270 Hz; mid-high: 0 to +12 dB at 2 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.81 lb (official manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe TPT-3000 combines a single full-range channel with adjustable filters and equalization. That gives you tuning controls for a compatible system without limiting the amplifier to bass-only applications.\u003c\/p\u003e\n\u003cp\u003eIts power figures are tied to both load impedance and supply voltage, making those conditions important when comparing ratings and planning your system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eMatch speaker wiring to the amplifier’s minimum rated impedance and size the vehicle electrical system for the intended installation. Use the manufacturer’s instructions for power wiring, fusing, ventilation, and setup.\u003c\/p\u003e\n\u003cp\u003eCheck available mounting space against the listed dimensions, and confirm that your speakers and source signal suit the planned configuration.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the TPT-3000 a bass-only amplifier?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a full-range monoblock with a stated frequency response of 10 Hz–20 kHz. Use appropriate crossover settings for the connected speakers.\u003c\/p\u003e\n\u003ch3\u003eHow should I compare its RMS power ratings?\u003c\/h3\u003e\n\u003cp\u003eCompare ratings at the same supply voltage and speaker load. The specifications list separate output figures at 12.6 V and 14.4 V, and at 1 ohm and 2 ohms.\u003c\/p\u003e\n\u003ch3\u003eWhat speaker load should I use?\u003c\/h3\u003e\n\u003cp\u003eThe listed minimum speaker load is 1 ohm. Match the final speaker wiring configuration to that rating.\u003c\/p\u003e\n\u003ch3\u003eWhat should I plan for during installation?\u003c\/h3\u003e\n\u003cp\u003eAllow space for the amplifier’s listed dimensions, and follow the manufacturer’s instructions for electrical connections, fusing, ventilation, and setup.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet for your car audio system. \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003eExplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686672728292,"sku":"TPT-3000 1 Ohm","price":152.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-3000-1-Ohm.jpg?v=1792709211"},{"product_id":"timpano-tpt-2200-1-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-2200 1 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Timpano TPT-2200 1 Ohm full-range monoblock amplifier gives your car audio system one powerful channel for suitable speakers or subwoofers. Its Class D design, adjustable high-pass and low-pass filters, and 10 Hz–22 kHz frequency response support more than bass-only use.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-range output:\u003c\/strong\u003e Use the single-channel amplifier with a suitable speaker or subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable crossover controls:\u003c\/strong\u003e Adjust the high-pass and low-pass filters to suit the connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo rated loads:\u003c\/strong\u003e Compare the listed RMS output at 1 ohm and 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection features:\u003c\/strong\u003e Thermal and short-circuit protection are included in the design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty terminals:\u003c\/strong\u003e Speaker and power terminals support secure connections during installation.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e2,600 W × 1 at 1 ohm; 1,720 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e2,015 W × 1 at 1 ohm; 1,330 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–16 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–22 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–90 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e90 Hz–22 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 7.46 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe TPT-2200 combines a single-channel design with full-range response and adjustable crossover controls. That gives you control over how the amplifier is matched to your system, rather than restricting it to bass-only use.\u003c\/p\u003e\n\u003cp\u003eIts power ratings are listed at two supply voltages and two speaker loads. Use the figures that match your planned electrical conditions and speaker impedance when comparing output.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eUse a speaker load of at least 1 ohm. Match the speaker wiring to the amplifier’s minimum rated impedance, and size the vehicle’s electrical system for the intended installation.\u003c\/p\u003e\n\u003cp\u003eAllow space for the 9.36 × 7.46 × 3.05-inch amplifier and follow the manufacturer’s instructions for power wiring, fusing, ventilation, and setup.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the minimum speaker impedance for the TPT-2200?\u003c\/h3\u003e\n\u003cp\u003eThe minimum speaker load is 1 ohm. Match the speaker wiring to this rating or a higher impedance.\u003c\/p\u003e \u003ch3\u003eHow much RMS power does it produce?\u003c\/h3\u003e\n\u003cp\u003eAt 14.4 V, the ratings are 2,600 W × 1 at 1 ohm and 1,720 W × 1 at 2 ohms. At 12.6 V, they are 2,015 W × 1 at 1 ohm and 1,330 W × 1 at 2 ohms.\u003c\/p\u003e \u003ch3\u003eCan this amplifier be used with speakers, not just subwoofers?\u003c\/h3\u003e\n\u003cp\u003eIt is a full-range amplifier, and its stated frequency response is 10 Hz–22 kHz. Match it to suitable speakers and use the crossover controls for your system.\u003c\/p\u003e \u003ch3\u003eWhat are the crossover adjustment ranges?\u003c\/h3\u003e\n\u003cp\u003eThe high-pass filter adjusts from 10–90 Hz. The low-pass filter adjusts from 90 Hz–22 kHz.\u003c\/p\u003e \u003ch3\u003eWhat should I check before installing it?\u003c\/h3\u003e\n\u003cp\u003eConfirm speaker impedance, available mounting space, and that the vehicle’s electrical system suits the planned installation. Follow the manufacturer’s instructions for wiring, fusing, ventilation, and setup.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Timpano TPT-2200 at 12 Volt Outlet. Want to learn more about Timpano? Explore the \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ebrands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686678692068,"sku":"TPT-2200 1 Ohm","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-2200-1-Ohm.jpg?v=1792709758"},{"product_id":"timpano-tpt-1500-1-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-1500 1 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a space-conscious car audio system with the Timpano TPT-1500 1 Ohm full-range monoblock amplifier. Its Class D design, adjustable crossover filters, and single-channel output support compatible speaker or subwoofer applications.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e The amplifier measures 9.36 × 5.53 inches, helping with placement in space-conscious installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-range response:\u003c\/strong\u003e Its 10 Hz–15 kHz frequency response supports a range of compatible audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable filters:\u003c\/strong\u003e Variable high-pass and low-pass filters help tailor the output to the selected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection features:\u003c\/strong\u003e Electronic protection monitors overheating and short-circuit conditions.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e1,600 W × 1 at 1 ohm; 1,050 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e1,250 W × 1 at 1 ohm; 750 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–15 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–15 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–90 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e90 Hz–15 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 5.53 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.62 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe TPT-1500 combines a compact footprint with adjustable filtering, giving you useful system-matching options in a single-channel amplifier. Its power ratings specify both supply voltage and speaker load, so you can compare output figures against your planned setup.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eMatch the speaker wiring to the amplifier’s 1-ohm minimum rated load. Size the vehicle’s electrical system for the intended installation, and follow the manufacturer’s instructions for power wiring, fusing, ventilation, and setup.\u003c\/p\u003e\n\u003cp\u003eAllow for the full 9.36 × 5.53 × 3.05-inch dimensions when planning placement. Output ratings vary with supply voltage and load impedance.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat RMS power does the TPT-1500 produce?\u003c\/h3\u003e\n\u003cp\u003eAt 14.4 V, it is rated at 1,600 W × 1 at 1 ohm and 1,050 W × 1 at 2 ohms. At 12.6 V, the ratings are 1,250 W × 1 at 1 ohm and 750 W × 1 at 2 ohms.\u003c\/p\u003e\n\u003ch3\u003eWhat is the minimum speaker load?\u003c\/h3\u003e\n\u003cp\u003eThe minimum rated speaker load is 1 ohm. Match your speaker wiring to this limit.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with speakers or a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eIts full-range design and adjustable high-pass and low-pass filters support compatible speaker or subwoofer applications. Match the load and filter settings to your system.\u003c\/p\u003e\n\u003ch3\u003eWhat should I plan for during installation?\u003c\/h3\u003e\n\u003cp\u003eCheck the amplifier’s dimensions and plan the vehicle electrical system for the intended installation. Follow the manufacturer’s instructions for wiring, fusing, ventilation, and setup.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Timpano TPT-1500 at 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003eexplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686683377892,"sku":"TPT-1500 1 Ohm","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-1500-1-Ohm.jpg?v=1792709757"},{"product_id":"timpano-tpt-8000-1-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-8000 1 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a high-output car audio system around the Timpano TPT-8000 1 Ohm full-range monoblock amplifier. This single-channel Class D amplifier offers an 8,000-watt RMS rating at 12.6 volts into 1 ohm, plus adjustable filters and a flat switch for system tuning.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-range response:\u003c\/strong\u003e The 10 Hz–12 kHz range supports compatible subwoofers, speakers, or drivers with suitable crossover settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable filters:\u003c\/strong\u003e Variable high-pass and low-pass controls help you tune the signal for your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass boost:\u003c\/strong\u003e Adjust boost from 0 to +10 dB and select a center frequency from 30–70 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat switch:\u003c\/strong\u003e Bypass the crossover and boost controls when integrating external signal processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation connections:\u003c\/strong\u003e Dual 0-gauge power inputs and 4-gauge speaker outputs support the specified connections.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e8,200 W × 1 at 1 ohm; 4,600 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e8,000 W × 1 at 1 ohm; 4,400 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–16 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–90 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e90 Hz–12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBass boost\u003c\/th\u003e\n\u003ctd\u003e0 to +10 dB; adjustable 30–70 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower inputs\u003c\/th\u003e\n\u003ctd\u003eDual 0-gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeaker outputs\u003c\/th\u003e\n\u003ctd\u003e4-gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 16.25 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12.10 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe TPT-8000 combines high RMS output with full-range response and installer-adjustable tuning. Use its crossover controls to shape the signal, or select flat mode when your system uses external signal processing.\u003c\/p\u003e\n\u003cp\u003eThermal and short-circuit protection are listed system features. The amplifier’s dimensions and connection sizes also give you concrete details for planning its installation.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis 1-ohm version requires a speaker load of at least 1 ohm. Match the connected load to the amplifier’s minimum rating and use the RMS power figures with their specified supply voltage and impedance.\u003c\/p\u003e\n\u003cp\u003ePlan power wiring, protection, ventilation, and the vehicle’s charging system around the amplifier’s electrical demands. Follow the manufacturer’s installation instructions and use a qualified installer.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the minimum speaker load for the TPT-8000 1 Ohm?\u003c\/h3\u003e\n\u003cp\u003eThe minimum speaker load is 1 ohm. Make sure the connected load does not fall below that rating.\u003c\/p\u003e\n\u003ch3\u003eHow do the RMS power ratings vary by voltage and impedance?\u003c\/h3\u003e\n\u003cp\u003eRatings are listed for both 12.6 V and 14.4 V, at 1 ohm and 2 ohms. See the Technical Specifications table for each rating.\u003c\/p\u003e\n\u003ch3\u003eCan this amplifier be used with speakers or drivers, not just subwoofers?\u003c\/h3\u003e\n\u003cp\u003eIts full-range response supports compatible subwoofers, speakers, or drivers when used with suitable crossover settings.\u003c\/p\u003e\n\u003ch3\u003eWhat should you plan for during installation?\u003c\/h3\u003e\n\u003cp\u003eAccount for the amplifier’s power demands, wiring, protection, ventilation, and the vehicle’s charging system. The manufacturer’s instructions recommend using a qualified installer.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop with 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003eexplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686683541732,"sku":"TPT-8000 1 Ohm","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-8000-1-Ohm.jpg?v=1792709761"},{"product_id":"timpano-tpt-8000-2-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-8000 2 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a high-output, single-channel car audio system with the Timpano TPT-8000 2 Ohm full-range monoblock amplifier. Its Class D design delivers up to 8,200 watts RMS at 14.4 volts into 2 ohms, with adjustable filtering for supported speaker, driver, or subwoofer applications.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-range response:\u003c\/strong\u003e The 10 Hz–12 kHz frequency range supports a variety of connected audio components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable crossovers:\u003c\/strong\u003e High-pass and low-pass filters let you set operating ranges for connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass adjustment:\u003c\/strong\u003e Variable bass boost provides 0 to +10 dB of adjustment across 30–70 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat switch:\u003c\/strong\u003e Bypass the amplifier’s crossover and boost settings when using external processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-current connections:\u003c\/strong\u003e Dual 0-gauge power inputs and 4-gauge speaker outputs support system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection features:\u003c\/strong\u003e Thermal and short-circuit protection are built in.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e8,200 W × 1 at 2 ohms; 4,400 W × 1 at 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e8,000 W × 1 at 2 ohms; 4,200 W × 1 at 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–16 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–90 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e90 Hz–12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBass boost\u003c\/th\u003e\n\u003ctd\u003e0 to +10 dB; adjustable 30–70 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower inputs\u003c\/th\u003e\n\u003ctd\u003eDual 0-gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeaker outputs\u003c\/th\u003e\n\u003ctd\u003e4-gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 16.25 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12.50 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis TPT-8000 is specifically the 2-ohm version, with rated output also listed for a 4-ohm load. Its adjustable filters and bass boost give you ways to shape the signal, while the Flat switch lets external processing handle those adjustments instead.\u003c\/p\u003e\n\u003cp\u003ePower ratings depend on both supply voltage and speaker impedance. Compare the ratings at your system’s operating voltage and final load when planning your setup.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eKeep the final speaker load at or above the amplifier’s 2-ohm minimum. This is the 2-ohm model, not the 1-ohm version, so check the completed speaker wiring before connecting it.\u003c\/p\u003e\n\u003cp\u003ePlan power wiring, protection, ventilation, and the vehicle’s charging system around the amplifier’s electrical demands. Follow the manufacturer’s installation instructions and use a qualified installer.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much power does the TPT-8000 produce?\u003c\/h3\u003e\n\u003cp\u003eIt is rated at 8,200 watts RMS × 1 at 2 ohms and 4,400 watts RMS × 1 at 4 ohms with a 14.4 V supply. At 12.6 V, the ratings are 8,000 watts RMS × 1 at 2 ohms and 4,200 watts RMS × 1 at 4 ohms.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a speaker load below 2 ohms?\u003c\/h3\u003e\n\u003cp\u003eNo. The minimum speaker load for this model is 2 ohms. Ensure the final wired load meets that minimum.\u003c\/p\u003e\n\u003ch3\u003eCan I use the amplifier with external audio processing?\u003c\/h3\u003e\n\u003cp\u003eYes. The Flat switch bypasses the internal crossover and boost settings when you are using external processing.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eCheck the final speaker impedance, available installation space, power wiring, protection, ventilation, and vehicle charging system. The amplifier measures 9.36 × 16.25 × 3.05 inches.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop for car audio at 12 Volt Outlet, and \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003eexplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"2 Ohm","offer_id":67686683672804,"sku":"TPT-8000 2 Ohm","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-8000-2-Ohm.jpg?v=1792709758"},{"product_id":"timpano-tpt-10500eq-1-ohm-full-range-monoblock-amplifier","title":"Timpano TPT-10500EQ 1 Ohm Full-Range Monoblock Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Timpano TPT-10500EQ 1 Ohm full-range monoblock amplifier gives you one channel with substantial RMS output and onboard equalization. Its variable crossover filters and separate bass, midbass, and midhigh controls let you tune a compatible car audio system to your setup.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-ohm minimum load:\u003c\/strong\u003e Match your speaker load to the amplifier’s rating before building your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh RMS output:\u003c\/strong\u003e Published ratings reach 11,600 W × 1 at 1 ohm and 14.4 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree equalization controls:\u003c\/strong\u003e Adjust bass, midbass, and midhigh tones for your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable crossover filters:\u003c\/strong\u003e Set the high-pass and low-pass ranges to suit connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput level adjustment:\u003c\/strong\u003e Match the amplifier’s input level to the incoming signal source.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D full-range monoblock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e11,600 W × 1 at 1 ohm; 7,300 W × 1 at 2 ohms; 4,800 W × 1 at 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 12.6 V\u003c\/th\u003e\n\u003ctd\u003e10,500 W × 1 at 1 ohm; 6,400 W × 1 at 2 ohms; 3,900 W × 1 at 4 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9.5–15 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–15 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e10–700 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e50 Hz–15 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEqualization\u003c\/th\u003e\n\u003ctd\u003eBass, midbass and midhigh controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput sensitivity\u003c\/th\u003e\n\u003ctd\u003e0.2 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput impedance\u003c\/th\u003e\n\u003ctd\u003e25 kilohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e11.57 × 20 × 3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.50 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis full-range monoblock combines specified output ratings at three load impedances with onboard tone and crossover adjustments. You can compare the ratings at 12.6 V and 14.4 V against your system’s planned load and supply conditions.\u003c\/p\u003e\n\u003cp\u003eThe 10 Hz–15 kHz frequency response supports system planning across a broad range, while the separate equalization controls give you additional ways to shape the sound.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThis 1-ohm version requires a speaker load of at least 1 ohm. Check the final load and the amplifier’s rated output at that impedance before installation.\u003c\/p\u003e\n\u003cp\u003ePlan power wiring, protection, ventilation, and the vehicle’s charging system around the amplifier’s electrical demands. Follow the manufacturer’s installation instructions and use a qualified installer. Allow for the 11.57 × 20 × 3 inch dimensions and 16.50 lb weight when planning placement.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do the RMS power ratings vary by load and voltage?\u003c\/h3\u003e\n\u003cp\u003eAt 14.4 V, ratings are 11,600 W × 1 at 1 ohm, 7,300 W × 1 at 2 ohms, and 4,800 W × 1 at 4 ohms. At 12.6 V, they are 10,500 W × 1 at 1 ohm, 6,400 W × 1 at 2 ohms, and 3,900 W × 1 at 4 ohms.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a speaker load below 1 ohm?\u003c\/h3\u003e\n\u003cp\u003eNo. The listed minimum speaker load is 1 ohm, so match your system to a load at or above that rating.\u003c\/p\u003e\n\u003ch3\u003eWhat crossover ranges can I adjust?\u003c\/h3\u003e\n\u003cp\u003eThe high-pass filter ranges from 10–700 Hz, and the low-pass filter ranges from 50 Hz–15 kHz.\u003c\/p\u003e\n\u003ch3\u003eWhat should I plan for before installation?\u003c\/h3\u003e\n\u003cp\u003eCheck the speaker load, available mounting space, and your vehicle’s charging system. Plan wiring, protection, and ventilation for the amplifier’s electrical demands, and follow the manufacturer’s instructions.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Timpano TPT-10500EQ at 12 Volt Outlet. \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003eExplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686684492004,"sku":"TPT-10500EQ 1 Ohm","price":515.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-10500EQ-1-Ohm.jpg?v=1792709757"},{"product_id":"timpano-tpt-bass5000-1-ohm-monoblock-bass-amplifier","title":"Timpano TPT-BASS5000 1 Ohm Monoblock Bass Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Timpano TPT-BASS5000 1 Ohm monoblock bass amplifier gives a compatible subwoofer system dedicated low-frequency power and adjustable filtering. It is a single-channel Class D amplifier rated at 5,200 W RMS at 1 ohm and 14.4 V.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated bass response:\u003c\/strong\u003e Its frequency response and filtering are designed for bass and sub-bass system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable filters:\u003c\/strong\u003e Variable subsonic and low-pass filters help you tune the amplifier to the enclosure and subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable bass boost:\u003c\/strong\u003e Set the boost level and frequency to shape low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible status indicators:\u003c\/strong\u003e Power, clipping and protection indicators show the amplifier’s operating status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation support:\u003c\/strong\u003e Cooling fans, heavy-duty terminals and four-way protection circuitry support high-output installations.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D monoblock bass amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e5,200 W × 1 at 1 ohm; 2,900 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–17 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e5–600 Hz with Flat on; 5–250 Hz with Flat off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSubsonic filter\u003c\/th\u003e\n\u003ctd\u003e5–40 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e30–250 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBass boost\u003c\/th\u003e\n\u003ctd\u003e0 to +10 dB; frequency adjustable 30–70 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 12.85 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.87 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis amplifier is built specifically for bass, with filter controls for shaping its low-frequency range rather than treating it as a full-range speaker amplifier. Its separate 1-ohm and 2-ohm RMS ratings help you compare output options when planning a compatible system.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eMatch speaker wiring to the amplifier’s minimum rated impedance, and size the vehicle’s electrical system for the intended installation. Output ratings depend on supply voltage and load impedance.\u003c\/p\u003e\n\u003cp\u003eUse the manufacturer’s installation instructions for power wiring, fusing, ventilation and setup. Check the amplifier’s dimensions against your planned mounting space.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the RMS power rating?\u003c\/h3\u003e\n\u003cp\u003eAt 14.4 V, the amplifier is rated at 5,200 W × 1 at 1 ohm and 2,900 W × 1 at 2 ohms.\u003c\/p\u003e\n\u003ch3\u003eWhat speaker load can I use?\u003c\/h3\u003e\n\u003cp\u003eThe minimum speaker load is 1 ohm. Match your speaker wiring to that rating.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the bass filtering?\u003c\/h3\u003e\n\u003cp\u003eYes. The subsonic filter adjusts from 5–40 Hz, and the low-pass filter adjusts from 30–250 Hz. Bass boost is adjustable from 0 to +10 dB, with its frequency adjustable from 30–70 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat space should I allow for installation?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer lists dimensions of 9.36 × 12.85 × 3.05 inches, measured L × W × H. Allow for the installation requirements in the manufacturer’s instructions.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop for the Timpano TPT-BASS5000 at 12 Volt Outlet. Want to learn more about Timpano? Explore the brands we sell through our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\"\u003ebrand directory\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686692094180,"sku":"TPT-BASS5000 1 Ohm","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-BASS5000-1-Ohm.jpg?v=1792709758"},{"product_id":"timpano-tpt-bass3000-1-ohm-monoblock-bass-amplifier","title":"Timpano TPT-BASS3000 1 Ohm Monoblock Bass Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGive your subwoofer system dedicated low-frequency power with the Timpano TPT-BASS3000 1 Ohm monoblock bass amplifier. It delivers 3,000 watts RMS at 1 ohm and 14.4 volts, with adjustable filtering and bass boost for system tuning.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D monoblock design:\u003c\/strong\u003e A single amplifier channel is dedicated to subwoofer and sub-bass applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable power ratings:\u003c\/strong\u003e Output is rated at 3,000 W × 1 at 1 ohm or 1,800 W × 1 at 2 ohms, both at 14.4 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable filters:\u003c\/strong\u003e Subsonic and low-pass controls help set the amplifier’s operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTunable bass boost:\u003c\/strong\u003e Adjust boost from 0 to +10 dB and choose a frequency from 30–70 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating indicators and protection:\u003c\/strong\u003e Power, clipping and protection LEDs, four-way protection and cooling fans support system monitoring and operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e The amplifier measures 9.36 × 9.03 × 3.05 inches for installation planning.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier type\u003c\/th\u003e\n\u003ctd\u003eClass D monoblock bass amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum speaker load\u003c\/th\u003e\n\u003ctd\u003e1 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRMS power at 14.4 V\u003c\/th\u003e\n\u003ctd\u003e3,000 W × 1 at 1 ohm; 1,800 W × 1 at 2 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e9–17 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e8–600 Hz with Flat on; 8–250 Hz with Flat off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSubsonic filter\u003c\/th\u003e\n\u003ctd\u003e8–40 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e30–250 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBass boost\u003c\/th\u003e\n\u003ctd\u003e0 to +10 dB; frequency adjustable 30–70 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003e\u0026gt;90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (manufacturer L × W × H)\u003c\/th\u003e\n\u003ctd\u003e9.36 × 9.03 × 3.05 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e6.14 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe TPT-BASS3000 combines high-output, single-channel subwoofer amplification with controls for shaping low-frequency response. Its adjustable filters and bass boost let you tune the signal around your system rather than relying on a fixed setting.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eMatch the speaker wiring to the amplifier’s minimum rated load of 1 ohm. Plan the vehicle electrical system for the intended installation and the amplifier’s 9–17 V supply range. Use the manufacturer’s installation instructions for power wiring, fusing, ventilation and setup. Allow space for the 9.36 × 9.03 × 3.05-inch amplifier.\u003c\/p\u003e\n\u003cp\u003eOutput ratings depend on supply voltage and load impedance. The listed RMS ratings are specified at 14.4 V.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much power does the TPT-BASS3000 produce?\u003c\/h3\u003e\n\u003cp\u003eIts RMS ratings at 14.4 V are 3,000 W × 1 at 1 ohm and 1,800 W × 1 at 2 ohms.\u003c\/p\u003e\n\u003ch3\u003eWhat speaker load can it support?\u003c\/h3\u003e\n\u003cp\u003eThe minimum rated speaker load is 1 ohm. Match your speaker wiring to the intended load.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the low-frequency response?\u003c\/h3\u003e\n\u003cp\u003eYes. The subsonic filter adjusts from 8–40 Hz, and the low-pass filter adjusts from 30–250 Hz. Bass boost is adjustable from 0 to +10 dB at 30–70 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat are the amplifier’s dimensions?\u003c\/h3\u003e\n\u003cp\u003eManufacturer dimensions are 9.36 × 9.03 × 3.05 inches (L × W × H). Its listed weight is 6.14 lb.\u003c\/p\u003e\n\u003ch3\u003eWhat should I plan for during installation?\u003c\/h3\u003e\n\u003cp\u003ePlan for the intended electrical load, speaker impedance, power wiring, fusing and ventilation. Follow the manufacturer’s installation instructions.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Timpano TPT-BASS3000 at 12 Volt Outlet. \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/brands-we-sell\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eExplore the brands we sell\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Timpano Audio","offers":[{"title":"1 Ohm","offer_id":67686694355172,"sku":"TPT-BASS3000 1 Ohm","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/TPT-BASS3000-1-Ohm.jpg?v=1792709758"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/collections\/TPT-BASS3000-1-Ohm.jpg?v=1792692598","url":"https:\/\/www.12voltoutlet.com\/collections\/timpano-audio.oembed","provider":"12 Volt Outlet","version":"1.0","type":"link"}