{"product_id":"audiopipe-aplx-1300-1","title":"Audiopipe APLX-1300.1 1 Mono Class D Mosfet Amplifier","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBring adjustable, low-frequency power to your car audio system with the Audiopipe APLX-1300.1 mono Class D MOSFET amplifier. It delivers 1300W RMS at 1 ohm and includes a wired remote bass knob, so you can adjust subwoofer level from the driver’s seat.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock output:\u003c\/strong\u003e Choose from three RMS power ratings to match the amplifier’s output to a supported subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D circuitry:\u003c\/strong\u003e The amplifier’s Class D design provides efficient power output for a subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote bass control:\u003c\/strong\u003e Adjust subwoofer level from the driver’s seat using the wired knob with an illuminated power indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable input sensitivity:\u003c\/strong\u003e The 0.15V–6V range lets you set input sensitivity for a compatible signal source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-frequency response:\u003c\/strong\u003e Its 10Hz–250Hz frequency response covers the bass range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-sided PCB:\u003c\/strong\u003e This board design supports heat dissipation and amplifier stability.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAudiopipe APLX-1300.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier type\u003c\/td\u003e\n\u003ctd\u003e1 Mono Class D MOSFET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power @ 1 Ohm (\u0026lt;1% Distortion)\u003c\/td\u003e\n\u003ctd\u003e1300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power @ 2 Ohms (\u0026lt;1% Distortion)\u003c\/td\u003e\n\u003ctd\u003e890W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRMS power @ 4 Ohms (\u0026lt;1% Distortion)\u003c\/td\u003e\n\u003ctd\u003e530W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum load\u003c\/td\u003e\n\u003ctd\u003e1 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e10Hz–250Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.15V–6V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 80dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e≤ 0.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking voltage\u003c\/td\u003e\n\u003ctd\u003e9V–16V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.76” x 7.09” x 2.11” (324 × 180 × 53.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe APLX-1300.1 gives you multiple documented RMS ratings across 1-, 2- and 4-ohm loads. That makes the load and power figures useful when comparing the amplifier with your subwoofer system. Its remote bass knob also puts level adjustment within reach while you drive.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eCheck that your planned subwoofer load is no lower than the 1-ohm minimum and that the amplifier’s power rating at that load suits your system. Allow for the amplifier’s 12.76” x 7.09” x 2.11” dimensions when planning its mounting location. The stated working voltage is 9V–16V.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much RMS power does the APLX-1300.1 produce?\u003c\/h3\u003e\n\u003cp\u003eIt is rated at 1300W RMS at 1 ohm, 890W RMS at 2 ohms, and 530W RMS at 4 ohms, each at \u0026lt;1% distortion.\u003c\/p\u003e \u003ch3\u003eWhat is the minimum supported load?\u003c\/h3\u003e\n\u003cp\u003eThe listed minimum load is 1 ohm. Confirm your subwoofer system’s final load before connecting it.\u003c\/p\u003e \u003ch3\u003eCan I adjust the bass level from the driver’s seat?\u003c\/h3\u003e\n\u003cp\u003eYes. The amplifier features a wired remote bass knob with an illuminated power indicator.\u003c\/p\u003e \u003ch3\u003eWill it work with my signal source?\u003c\/h3\u003e\n\u003cp\u003eInput sensitivity adjusts from 0.15V to 6V. Check your source’s signal level against this range when planning the system.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop Audiopipe products at 12 Volt Outlet. Want to learn more about Audiopipe? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/audiopipe\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAudiopipe brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Audiopipe","offers":[{"title":"Default Title","offer_id":67691841061092,"sku":"APLX-1300.1","price":152.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/audiopipe-aplx-1300-1-01.jpg?v=1792709273","url":"https:\/\/www.12voltoutlet.com\/products\/audiopipe-aplx-1300-1","provider":"12 Volt Outlet","version":"1.0","type":"link"}