{"product_id":"ds18-exl-p2000x1d-exl-power-1-channel-class-d-amplifier-2000-x-1-1-ohm-watts-rms-made-in-korea","title":"DS18 EXL-P2000X1D EXL Power 1-Channel Class D Amplifier 2000 x 1 @ 1-Ohm Watts Rms  Made In Korea","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 EXL-P2000X1D is a 1-channel Class D monoblock car amplifier built in Korea, engineered with optimized Korean circuitry for high-power subwoofer control and efficient cooling via a robust heatsink. It includes a bass knob and precise filters for on-car tuning and a power\/clip\/protect LED array for at-a-glance state awareness.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 1 Ohm\u003c\/b\u003e: 2000W x 1 CH — Delivers peak-for-sub stability at a 1-ohm load, ideal for high-demand subwoofers with tight, controlled bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 2 Ohm\u003c\/b\u003e: 1400W x 1 CH — Provides ample headroom for medium-load sub configurations while maintaining clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRMS Power @ 4 Ohm\u003c\/b\u003e: 800W x 1 CH — Suitable for lower-impedance stability with reduced heat under lighter loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 15Hz–250Hz — Focused on deep sub-bass and low-frequency extension for impactful bass without excessive highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal\/Noise Ratio\u003c\/b\u003e: \u0026gt; 98dB — Low noise floor helps subwoofers stay quiet when the rest of the system is silent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficiency @ 4 Ohm\u003c\/b\u003e: \u0026gt; 87% — Higher efficiency means less heat under normal operation and better overall reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTHD\u003c\/b\u003e: \u0026lt; 0.02% — Very low distortion at rated power for cleaner bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDamping Factor\u003c\/b\u003e: 200 — Strong control of the sub’s mechanical movement, reducing woofer breakup and improving transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow Level Input Range\u003c\/b\u003e: 200mV–6V — Broad compatibility with common preamp outputs and head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eX-Over\u003c\/b\u003e: LPF Fixed; 35–250Hz range — Subsonic-friendly low-pass control to tailor the bass region to your enclosure and subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBass Boost\u003c\/b\u003e: 0–+9dB; 30–60Hz — Gentle boost to help tailor the sub’s low end to the vehicle’s acoustics and seating position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInfrasonic Filter\u003c\/b\u003e: 10–30Hz — Helps suppress rumble and wind noise from the woofer excursion in-dash installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhase Selector\u003c\/b\u003e: 0–180° — Aligns the sub’s phase with the rest of the system for coherent bass integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmplifier Type\u003c\/b\u003e: Monoblock — Dedicated single-channel amp optimized for subwoofer duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubwoofer Channels\u003c\/b\u003e: 1 CH — Focused channel for pure subwoofer amplification with dedicated controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum Impedance\u003c\/b\u003e: 1 Ohm — Stable operation at low impedance, enabling robust low-end output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLED Indicator\u003c\/b\u003e: PWR \/ CLIP \/ PROTECT — Quick fault and operation status at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote Level Control\u003c\/b\u003e: Yes — Dash-mount control for on-the-fly level adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooling\u003c\/b\u003e: No fan — Quiet operation with a heatsink-equipped chassis for thermal management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThermal Protection\u003c\/b\u003e: Yes \u0026gt;75°C \/ 167°F — Safeguards against overheating during hard bass demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection\u003c\/b\u003e: Over-Load, DC Output, Short Circuit Output, Voltage Input, Clipping — Comprehensive safeguards to protect the amp and speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower Wiring\u003c\/b\u003e: 1\/0 AWG inputs for power\/ground; 8 AWG speaker input terminals — Designed for high-current, low-impedance wiring in demanding installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Color \/ Finish\u003c\/b\u003e: Black — Sleek, durable exterior suitable for premium builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDimensions\u003c\/b\u003e: 12.67 x 8.77 x 2.67 inches (L x W x H) — Compact footprint that fits common under-seat or trunk installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade In\u003c\/b\u003e: Korea — Built to precise standards with material attention from DS18.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe EXL-P2000X1D is a purpose-built solution for serious subwoofer systems that demand high current, precise control, and reliable protection in a compact, non-audible-fan package. It pairs with large-gauge wiring, a fixed low-pass path, and on-board tuning to shape a powerful, clean bass stage in a wide range of vehicles.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850245972196,"sku":null,"price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/EXL-P2000X1D-2000X2000_700x_7a50bac4-3a09-4d97-b3a7-b3d1dc164701.webp?v=1789261803","url":"https:\/\/www.12voltoutlet.com\/products\/ds18-exl-p2000x1d-exl-power-1-channel-class-d-amplifier-2000-x-1-1-ohm-watts-rms-made-in-korea","provider":"12 Volt Outlet","version":"1.0","type":"link"}