{"product_id":"ds18-gtx1-3-die-cast-compression-neodymium-super-bullet-tweeter-240-watts-1-titanium-4-ohm-vc","title":"DS18 GTX1 3\" Die Cast  Compression Neodymium Super Bullet Tweeter 240 Watts 1\" Titanium 4-Ohm (each)","description":"\u003cdiv\u003e\n\u003cp\u003eDS18 GTX1 is a 3-inch die-cast compression neodymium super bullet tweeter built for car audio enthusiasts who demand precise, extended highs in compact installations. It combines a titanium diaphragm, a 1\" voice coil on a Kapton former, a neodymium magnet, and a rugged aluminum housing to deliver detailed high-frequency performance up to 20 kHz with a 98 dB sensitivity and a 240W peak rating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Diameter\u003c\/b\u003e: 3\" — defines the driver’s basic size and helps determine fitment in tighter spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNominal Impedance\u003c\/b\u003e: 4 Ohms — compatibility with common amplifiers and crossover networks; affects how much current the tweeter draws from an amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAES Power Handling\u003c\/b\u003e: 60W — continuous (RMS) power the tweeter can handle, important for reliable long-term performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProgram Power Handling\u003c\/b\u003e: 120W — higher power allowance for short-duration musical transients without clipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePeak Power Handling\u003c\/b\u003e: 240W — maximum instantaneous power the tweeter can tolerate during peak transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensitivity\u003c\/b\u003e: 98 dB (1W\/1m) — how efficiently the tweeter converts input power to sound pressure at a fixed distance, influencing required amplifier headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency Response\u003c\/b\u003e: 3 kHz – 20 kHz — range over which the tweeter accurately reproduces high-frequency content, from upper mids to ultrasonic treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended Hi Pass Crossover\u003c\/b\u003e: 3 kHz — suggested crossover point to protect the tweeter while preserving high-frequency clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Diameter\u003c\/b\u003e: 1\" \/ 25.4 mm — size of the coil that converts electrical energy to mechanical motion, influencing heat dissipation and dynamics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVoice Coil Former Material\u003c\/b\u003e: Kapton — durable, heat-resistant base for the voice coil under high-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiaphragm Material\u003c\/b\u003e: Titanium — rigid, lightweight diaphragm designed for crisp, detailed high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnet Material\u003c\/b\u003e: Neodymium — provides strong magnetic flux in a compact form, aiding efficiency and mounting flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody Material\u003c\/b\u003e: Aluminum — rigid, die-cast housing that supports consistent performance and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Diameter\u003c\/b\u003e: 2.95\" \/ 75 mm — physical footprint important for enclosure and mounting planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Depth\u003c\/b\u003e: 1.96\" \/ 49.9 mm — depth required behind mounting surface, relevant to dash, door, or pillar installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront Mount Baffle Cutout\u003c\/b\u003e: 2.26\" \/ 57.3 mm — required cutout diameter for flush mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting Depth\u003c\/b\u003e: 1.46\" \/ 37 mm — space needed behind the mounting surface for proper installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduct Weight\u003c\/b\u003e: 1 lb — compact, lightweight design that complements tight installation layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn car audio builds, GTX1 is designed to mount wherever space allows, providing an articulate high-frequency extension without demanding excessive enclosure real estate. The combination of a neodymium magnet, titanium diaphragm, and aluminum housing delivers precise highs with durable, compact construction suitable for sophisticated component or custom installs.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":49850243940580,"sku":null,"price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/GTX12000x2000_700x_75dcb66a-44ec-442f-ae5d-0db86c169d94.webp?v=1789261736","url":"https:\/\/www.12voltoutlet.com\/products\/ds18-gtx1-3-die-cast-compression-neodymium-super-bullet-tweeter-240-watts-1-titanium-4-ohm-vc","provider":"12 Volt Outlet","version":"1.0","type":"link"}