{"product_id":"machete-mla-70-2-xs-70-watt-2-channel-amplifier","title":"Deaf Bonce MACHETE MLA-70.2 XS | 70 Watt 2-channel amplifier","description":"\u003cdiv\u003e\n\u003cp\u003eThe Deaf Bonce MACHETE MFA-2.520 is a 2‑channel Class D amplifier built for high‑current car audio installs, delivering 750 W per channel into 2 Ω and 1500 W bridged into 4 Ω for demanding front\/sub configurations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel\u003c\/b\u003e: MFA-2.520 — Precise model identifier used for compatibility and service reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClass\u003c\/b\u003e: D — Efficient switching design that reduces heat and allows compact chassis in performance builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of the channels\u003c\/b\u003e: 2 — Separate output channels suitable for a stereo front stage or paired channels for a bridged sub setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFrequency response\u003c\/b\u003e: 20–20000 Hz — Covers the full audible spectrum, from deep bass to shimmering highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 Ohm RMS Power (14.4 V)\u003c\/b\u003e: 750 W x 2 — High power delivery into low-impedance loads for louder, cleaner output per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 Ohm RMS Power (14.4 V)\u003c\/b\u003e: 520 W x 2 — Strong per‑channel performance at 4 Ω, suitable for mid\/high drivers in a two‑channel setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4 Ohm RMS Power (Bridge)\u003c\/b\u003e: 1500 W x 1 — Bridged operation provides substantial single‑channel power for a sub or mono output with a 4 Ω load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum permissible load on the channel\u003c\/b\u003e: 2 Ohm — The amp can operate down to 2 Ω per channel, enabling low‑impedance speaker choices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum permissible load in a bridge connection\u003c\/b\u003e: 4 Ohm — When bridged, keep the load at 4 Ω or higher for safe operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput SPL\u003c\/b\u003e: 0.4–8 V — Defines the input signal range needed to reach full power from a compatible head unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow pass filter\u003c\/b\u003e: 50–12000 Hz — Set the high‑frequency cutoff to tailor bass\/woofer or sub performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh pass filter\u003c\/b\u003e: 50–12000 Hz — Excludes bass or low‑frequency content from a channel to protect drivers and tighten response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLPF and HPF simultaneous operation\u003c\/b\u003e: True — You can run both filters at once for precise, multi‑way tuning on a two‑channel setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCrossover\u003c\/b\u003e: 12 dB\/Oct — Steeper slope for cleaner separation between drivers, reducing overlap and masking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInput terminal\u003c\/b\u003e: 4 Ga — Requires a 4 AWG power wire for proper supply capability in high‑current installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOutput terminal\u003c\/b\u003e: 8 Ga — Uses an 8 AWG conductor for power output connections to the vehicle wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking voltage\u003c\/b\u003e: 9–15 V — Designed to operate within typical automotive electrical systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSignal‑to‑noise ratio\u003c\/b\u003e: ~90 dB — Reflects low background noise for clearer, more dynamic sound under typical car conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize (WxLxH)\u003c\/b\u003e: 11 x 6 x 2.2 inch — Compact footprint suitable for under‑seat or dash installations with room to spare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBenefits: In a two‑channel or bridged configuration, this amp provides robust, clean power with flexible filtering to tailor a multi‑driver system. The wide frequency range, generous low‑impedance capability, and adjustable LPF\/HPF allow precise tuning for a cohesive, high‑fidelity car audio build while staying within vehicle electrical limits and accommodating standard head units.\u003c\/p\u003e \u003cbr\u003e \u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMFA-2.520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass\u003c\/td\u003e\n\u003ctd\u003eD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of the channels\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20-20000 Hz\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 Ohm RMS Power (14.4 V)\u003c\/td\u003e\n\u003ctd\u003e750 W x 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 Ohm RMS Power (14.4 V)\u003c\/td\u003e\n\u003ctd\u003e520 W x 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 Ohm RMS Power (Bridge)\u003c\/td\u003e\n\u003ctd\u003e1500 W x 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum permissible load on the channel\u003c\/td\u003e\n\u003ctd\u003e2 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum permissible load in a bridge connection\u003c\/td\u003e\n\u003ctd\u003e4 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput SPL\u003c\/td\u003e\n\u003ctd\u003e0.4 - 8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow pass filter\u003c\/td\u003e\n\u003ctd\u003e50-12000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh pass filter\u003c\/td\u003e\n\u003ctd\u003e50-12000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLPF and HPF simultaneous operation\u003c\/td\u003e\n\u003ctd\u003eTrue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossover\u003c\/td\u003e\n\u003ctd\u003e12 dB\/Oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput terminal\u003c\/td\u003e\n\u003ctd\u003e4 Ga\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput terminal\u003c\/td\u003e\n\u003ctd\u003e8 Ga\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking voltage\u003c\/td\u003e\n\u003ctd\u003e9 - 15V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio\u003c\/td\u003e\n\u003ctd\u003e��� 90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize (WxLxH)\u003c\/td\u003e\n\u003ctd\u003e11 x 6 x 2.2 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Deaf Bonce","offers":[{"title":"Default Title","offer_id":49850216153316,"sku":null,"price":239.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/fuf76.png?v=1789260710","url":"https:\/\/www.12voltoutlet.com\/products\/machete-mla-70-2-xs-70-watt-2-channel-amplifier","provider":"12 Volt Outlet","version":"1.0","type":"link"}