{"product_id":"vibe-audio-fd-ppkt-3-ford-bronco-audio-kit","title":"Metra SoundStage \/ VIBE Audio FD-PPKT-3 Ford Bronco Audio Kit (2021–2026, non-amplified)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a complete DSP-controlled speaker system for a non-amplified Ford Bronco with the Metra SoundStage \/ VIBE Audio FD-PPKT-3 audio kit. It combines a six-channel DSP amplifier, a separate mono amplifier, six cabin speakers and a sealed 12-inch subwoofer in a vehicle-specific package.\u003c\/p\u003e\n\u003cp\u003eThe kit includes the integration parts, speaker adapters and rear pods needed for its listed application, along with a vehicle-specific DSP tuning file. Its subwoofer enclosure mounts at the tailgate.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP-controlled six-channel amplifier:\u003c\/strong\u003e The PB80.6-8DSP-V3 provides six amplified channels and accepts the supplied vehicle-specific tuning file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate subwoofer amplifier:\u003c\/strong\u003e The PB650.1D-V4 supplies dedicated power for the included subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix cabin speakers:\u003c\/strong\u003e Four-inch dash speakers and 6.5-inch kick-panel and rear pairs provide speaker locations across the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed 12-inch enclosure:\u003c\/strong\u003e The BAMIT12-V4 includes tailgate mounting brackets and a dual 2-ohm subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-system integration:\u003c\/strong\u003e The active Axxess LOC, vehicle-matched T-harness and OE-style connectors support integration with the listed factory audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific mounting parts:\u003c\/strong\u003e The kit includes a drilled amplifier rack, installation hardware, speaker adapters, harnesses and wiring components.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSystem contents and package parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne PB80.6-8DSP-V3 six-channel DSP\/amplifier combination.\u003c\/li\u003e\n\u003cli\u003eOne PB650.1D-V4 mono amplifier; published output is 650 W at 1 ohm.\u003c\/li\u003e\n\u003cli\u003eTwo 4-inch concentric dash speakers, two 6.5-inch front kick-panel speakers and two 6.5-inch rear speakers.\u003c\/li\u003e\n\u003cli\u003eOne 12-inch subwoofer in a sealed BAMIT12-V4 enclosure.\u003c\/li\u003e\n\u003cli\u003eVehicle-specific DSP tuning file for loading through computer software.\u003c\/li\u003e\n\u003cli\u003eApplication-matched amplifier installation kit and amplifier mounting rack.\u003c\/li\u003e\n\u003cli\u003eFD-BROPOD1 rear speaker pods, step-by-step installation documentation, mounting hardware and enclosure mounting brackets.\u003c\/li\u003e\n\u003cli\u003eBLK-FD-PPKT-3A: vehicle-specific integration and installation parts.\u003c\/li\u003e\n\u003cli\u003eBLK-FD-PPKT-3B: vehicle-specific integration and installation parts.\u003c\/li\u003e\n\u003cli\u003eBAMIT12-V4: 12-inch subwoofer enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB80.6-8DSP-V3 DSP and amplifier combo\u003c\/td\u003e\n\u003ctd\u003e6 amplified channels; 1200W maximum power rating; 6x80W RMS into 4 ohms, stereo; specified frequency range: 20Hz – 20kHz; chassis dimensions (H × W × D): 1.5\" H x 8.6\" W x 5.1\" D (40mm x 220mm x 131mm); compact Class D amplifier topology. Load the vehicle-specific DSP equalization file using computer-based software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB650.1D-V4 amplifier\u003c\/td\u003e\n\u003ctd\u003e1200W maximum power rating; output at 4 ohms: 325W; output at 2 ohms: 475W; output at 1 ohm: 650W. The output rating type is not specified as RMS. Chassis dimensions (H × W × D): 1.85\" H x 9.05\" W x 5.27\" D (47mm x 230mm x 134mm). Class D topology.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCVEN4CN-V5 concentric dash speakers\u003c\/td\u003e\n\u003ctd\u003eNominal driver size: 4\"; speaker power capacity: 120W Peak \/ 60W RMS; rated sensitivity: 88dB; specified frequency range: 110Hz – 20kHz; nominal impedance: 3.2 Ohms. Installation component: Metra 82-5609 speaker adapters.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK6SQM-V5 front kick-panel speakers\u003c\/td\u003e\n\u003ctd\u003eNominal driver size: 6.5\"; speaker power capacity: 270W Peak \/ 90W RMS; rated sensitivity: 94dB; specified frequency range: 55Hz – 20kHz; nominal impedance: 4 ohms. Installation components: Metra 82-5605 speaker adapters and Metra 72-5602 speaker harnesses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK6SQM-V5 rear speakers\u003c\/td\u003e\n\u003ctd\u003eNominal driver size: 6.5\"; speaker power capacity: 270W Peak \/ 90W RMS; rated sensitivity: 94dB; specified frequency range: 55Hz – 20kHz; nominal impedance: 4 ohms. Installation component: Metra FD-BROPOD1 rear speaker pods.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBAMIT12-V4 subwoofer and sealed enclosure\u003c\/td\u003e\n\u003ctd\u003eNominal driver size: 12\"; speaker power capacity: 900W Peak \/ 300W RMS; rated sensitivity: 85dB; specified frequency range: 30Hz - 1kHz; nominal impedance: Dual 2 ohms. Enclosure mounting brackets are supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxxess AX-LOC4.4-PRO active LOC\u003c\/td\u003e\n\u003ctd\u003eFour inputs, four outputs and bass boost; specified input capability: 40 V maximum \/ 400 W at 20 kΩ. Load resistors are built into the converter. Vehicle-matched T-harness, original-equipment-style connectors and RCA cables are supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra amplifier installation kit\u003c\/td\u003e\n\u003ctd\u003e4-gauge OFC power wire: 9.5 ft; 8-gauge OFC ground wire: 8 ft; 12-gauge OFC speaker wire: 12 ft. Fuse protection: T-Spec VMANL watertight fuse holder with 100A MANL fuse. Power distribution block and installation fasteners\/hardware included.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra vehicle-specific amplifier mounting rack\u003c\/td\u003e\n\u003ctd\u003eMounting design is specific to the listed vehicle application; CNC-cut construction with holes already drilled; mounts behind the rear seat using original-equipment bolt locations. For a two-door application, the manufacturer calls for amplifier-rack modification to clear the panel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003ePeak or maximum figures are not continuous system ratings. An output is labeled RMS only where the specifications explicitly identify it that way. Metra estimates 6–8 hours for one experienced technician and lists a one-year warranty for the kit.\u003c\/p\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis package brings the signal integration, amplification, speakers and subwoofer enclosure together for the specified non-amplified Bronco application. The supplied DSP file is vehicle-specific, while the separate mono amplifier is assigned to the subwoofer.\u003c\/p\u003e\n\u003cp\u003eMetra specifies that the package is not designed to be split into separately installed products. Use the supplied components together as the intended system, rather than treating them as a collection of unrelated upgrades.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eThe product listing describes fitment for 2021–2026 Ford Bronco models with the non-amplified factory audio system. However, the manufacturer Vehicle Applications entries list 2021–2024. Confirm 2025–2026 compatibility directly with Metra before ordering.\u003c\/p\u003e\n\u003cp\u003eThis kit is not compatible with the Ford Bronco Sport. Two-door Bronco installations require modification of the amplifier rack to clear the panel. Check vehicle fitment and mounting clearance before beginning installation.\u003c\/p\u003e\n\u003cp\u003eThe kit’s installation guide specifies a series connection between the subwoofer’s two voice coils. With the included dual 2-ohm subwoofer, this produces a 4-ohm final load. Follow the kit-specific terminal diagram when connecting the enclosure.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer estimates 6–8 hours for one experienced technician. Review the supplied step-by-step documentation and the latest installation steps before starting.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich Ford Bronco models does the FD-PPKT-3 fit?\u003c\/h3\u003e\n\u003cp\u003eThe product listing says 2021–2026 Bronco with the non-amplified factory audio system, while the manufacturer Vehicle Applications entries list 2021–2024. Confirm 2025–2026 fitment with Metra before ordering.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit a Ford Bronco Sport?\u003c\/h3\u003e\n\u003cp\u003eNo. The included BAMIT12-V4 enclosure’s product sheet excludes the Bronco Sport.\u003c\/p\u003e\n\u003ch3\u003eDoes the kit work with a two-door Bronco?\u003c\/h3\u003e\n\u003cp\u003eA two-door installation requires modifying the amplifier rack so it clears the panel.\u003c\/p\u003e\n\u003ch3\u003eWhat final load does the included subwoofer use?\u003c\/h3\u003e\n\u003cp\u003eConnect its dual 2-ohm voice coils in series, as shown in the kit-specific terminal diagram, for a 4-ohm final load.\u003c\/p\u003e\n\u003ch3\u003eCan I install the components as separate upgrades?\u003c\/h3\u003e\n\u003cp\u003eMetra specifies that this package is not designed to be split into separately installed products. Use the supplied components together as the intended system.\u003c\/p\u003e\n\u003ch3\u003eHow long does installation take?\u003c\/h3\u003e\n\u003cp\u003eMetra estimates 6–8 hours for one experienced technician.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Metra SoundStage \/ VIBE Audio FD-PPKT-3 at 12 Volt Outlet. Want to learn more about Metra? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/metra-electronics-history\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMetra brand profile\u003c\/a\u003e. Want to learn more about VIBE? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/vibe-audio\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVibe brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VIBE Audio","offers":[{"title":"Default Title","offer_id":67666186764516,"sku":"FD-PPKT-3","price":3076.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/vibe-audio-fd-ppkt-3-manufacturer-view-1_e55fe508-ba1e-4d2c-9254-282119b2d385.jpg?v=1792708317","url":"https:\/\/www.12voltoutlet.com\/products\/vibe-audio-fd-ppkt-3-ford-bronco-audio-kit","provider":"12 Volt Outlet","version":"1.0","type":"link"}