{"product_id":"vibe-audio-fd-ppkt-4-ford-bronco-bo-audio-kit","title":"Metra SoundStage \/ VIBE Audio FD-PPKT-4 Ford Bronco Audio Kit (2021–2024, B\u0026O factory-amplified)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild out the factory-amplified system in your 2021–2024 Ford Bronco with the Metra SoundStage \/ VIBE Audio FD-PPKT-4 Ford Bronco audio kit. It combines a six-channel DSP amplifier, a separate mono amplifier, six cabin speakers, and a sealed 12-inch subwoofer in a tailgate-mounted enclosure.\u003c\/p\u003e\n\u003cp\u003eThe included Axxess A2B interface connects at the factory amplifier location and retains equipped original-equipment chimes and voice prompts. This package is designed to be installed as a complete system, not split into separately installed products.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo amplifiers:\u003c\/strong\u003e The PB80.6-8DSP-V3 handles six amplified channels, while the PB650.1D-V4 provides a dedicated mono amplifier for the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix replacement speakers:\u003c\/strong\u003e Four-inch dash speakers and 6.5-inch front and rear pairs cover the listed cabin locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgate subwoofer:\u003c\/strong\u003e The BAMIT12-V4 pairs a dual 2-ohm, 12-inch subwoofer with a sealed enclosure and mounting brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-audio integration:\u003c\/strong\u003e The Axxess A2B interface keeps equipped factory chimes and voice prompts available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific installation parts:\u003c\/strong\u003e The package includes an application-matched amplifier rack, installation kit, speaker adapters, harnesses, and rear speaker pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific DSP tuning:\u003c\/strong\u003e Load the supplied tuning file using computer-based software to configure the DSP for the listed application.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem and fitment\u003c\/th\u003e\n\u003ctd\u003eMetra SoundStage \/ VIBE Audio FD-PPKT-4; 2021–2024 Ford Bronco with factory B\u0026amp;O amplified audio system. Not compatible with Ford Bronco Sport. Two-door installations require modification of the amplifier rack so it fits behind the panel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage part numbers\u003c\/th\u003e\n\u003ctd\u003eBLK-FD-PPKT-3A: vehicle-specific integration and installation parts; BLK-FD-PPKT-4B: vehicle-specific integration and installation parts; BAMIT12-V4: 12-inch subwoofer enclosure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded system components\u003c\/th\u003e\n\u003ctd\u003eOne PB650.1D-V4 mono amplifier; one PB80.6-8DSP-V3 six-channel DSP\/amplifier combination; two 4-inch concentric dash speakers; two 6.5-inch front kick-panel speakers; two 6.5-inch rear speakers; one 12-inch subwoofer with sealed enclosure; vehicle-specific DSP tuning file for loading through computer software; application-matched amplifier installation kit; application-matched amp mounting rack; step-by-step installation documentation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 amplified channels\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 maximum power rating\u003c\/th\u003e\n\u003ctd\u003e1200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 continuous output\u003c\/th\u003e\n\u003ctd\u003e6x80W RMS into 4 ohms, stereo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 specified frequency range\u003c\/th\u003e\n\u003ctd\u003e20Hz – 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 chassis dimensions (H × W × D)\u003c\/th\u003e\n\u003ctd\u003e1.5\" H x 8.6\" W x 5.1\" D (40mm x 220mm x 131mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB80.6-8DSP-V3 topology and tuning\u003c\/th\u003e\n\u003ctd\u003eCompact Class D amplifier topology. Load the vehicle-specific DSP equalization file using computer-based software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 maximum power rating\u003c\/th\u003e\n\u003ctd\u003e1200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 output at 4 ohms\u003c\/th\u003e\n\u003ctd\u003e325W (rating type not specified as RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 output at 2 ohms\u003c\/th\u003e\n\u003ctd\u003e475W (rating type not specified as RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 output at 1 ohm\u003c\/th\u003e\n\u003ctd\u003e650W (rating type not specified as RMS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 chassis dimensions (H × W × D)\u003c\/th\u003e\n\u003ctd\u003e1.85\" H x 9.05\" W x 5.27\" D (47mm x 230mm x 134mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePB650.1D-V4 topology\u003c\/th\u003e\n\u003ctd\u003eClass D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCVEN4CN-V5 4\" concentric dash speakers\u003c\/th\u003e\n\u003ctd\u003eNominal driver size: 4\"; speaker power capacity: 120W Peak \/ 60W RMS; rated sensitivity: 88dB; specified frequency range: 110Hz – 20kHz; nominal impedance: 3.2 Ohms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDash speaker installation components\u003c\/th\u003e\n\u003ctd\u003eMetra 82-5609 speaker adapters; Metra 72-5603 speaker harnesses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSLICK6SQM-V5 6.5\" front kick-panel speakers\u003c\/th\u003e\n\u003ctd\u003eNominal driver size: 6.5\"; speaker power capacity: 270W Peak \/ 90W RMS; rated sensitivity: 94dB; specified frequency range: 55Hz – 20kHz; nominal impedance: 4 ohms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront kick-panel speaker installation components\u003c\/th\u003e\n\u003ctd\u003eMetra 82-5605 speaker adapters; Metra 72-5602 speaker harnesses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSLICK6SQM-V5 6.5\" rear speakers\u003c\/th\u003e\n\u003ctd\u003eNominal driver size: 6.5\"; speaker power capacity: 270W Peak \/ 90W RMS; rated sensitivity: 94dB; specified frequency range: 55Hz – 20kHz; nominal impedance: 4 ohms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear speaker installation component\u003c\/th\u003e\n\u003ctd\u003eMetra FD-BROPOD1 rear speaker pods.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBAMIT12-V4 12\" subwoofer and sealed enclosure\u003c\/th\u003e\n\u003ctd\u003eNominal driver size: 12\"; speaker power capacity: 900W Peak \/ 300W RMS; rated sensitivity: 85dB; specified frequency range: 30Hz - 1kHz; nominal impedance: Dual 2 ohms. Enclosure mounting brackets are supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSubwoofer voice-coil connection\u003c\/th\u003e\n\u003ctd\u003eThe kit installation guide specifies a series connection between the two voice coils. With the included dual 2-ohm subwoofer, this produces a 4-ohm final load. Follow the kit-specific terminal diagram when connecting the enclosure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxxess A2B interface\u003c\/th\u003e\n\u003ctd\u003eInstallation position: factory-amplifier location. Original-equipment chimes and voice prompts remain available when the vehicle has them.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMetra amplifier installation kit wiring\u003c\/th\u003e\n\u003ctd\u003e4-gauge OFC power wire: 9.5 ft; 8-gauge OFC ground wire: 8 ft; 12-gauge OFC speaker wire: 12 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMetra amplifier installation kit hardware\u003c\/th\u003e\n\u003ctd\u003eT-Spec VMANL watertight fuse holder with 100A MANL fuse; power distribution block; installation fasteners\/hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMetra vehicle-specific amp mounting rack\u003c\/th\u003e\n\u003ctd\u003eMounting design is specific to the listed vehicle application. CNC-cut construction with holes already drilled. Mounts behind the rear seat using original-equipment bolt locations. For a two-door application, the manufacturer calls for amplifier-rack modification to clear the panel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer installation estimate\u003c\/th\u003e\n\u003ctd\u003e6–8 hours for one experienced technician.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer warranty\u003c\/th\u003e\n\u003ctd\u003eOne-year warranty for the kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRating note\u003c\/th\u003e\n\u003ctd\u003eThe ratings above belong to the named components. Peak or maximum figures are not a continuous system rating; an output is labeled RMS only where the source explicitly identifies it that way.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe FD-PPKT-4 brings the amplifiers, speakers, subwoofer, integration interface, and vehicle-specific mounting pieces together in one package for the specified Bronco audio system. The separate mono amplifier is dedicated to the subwoofer, while the six-channel DSP amplifier powers the cabin speakers and accepts the supplied vehicle-specific tuning file.\u003c\/p\u003e\n\u003cp\u003eMetra specifies a one-year warranty for the kit. The component power ratings are not interchangeable: peak and maximum figures are not continuous system ratings, and only outputs expressly marked RMS should be read as RMS.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eFitment is for 2021–2024 Ford Bronco models equipped with factory B\u0026amp;O amplified audio. The kit is not compatible with Ford Bronco Sport. Manufacturer application listings do not remove these audio-system and model exclusions.\u003c\/p\u003e\n\u003cp\u003eTwo-door Bronco installations require amplifier-rack modification to clear the panel. The rack mounts behind the rear seat at original-equipment bolt locations. Check vehicle fitment, mounting clearance, and the latest installation steps before starting. Metra estimates 6–8 hours for one experienced technician.\u003c\/p\u003e\n\u003cp\u003eConnect the subwoofer voice coils in series as directed by the kit-specific terminal diagram. The included dual 2-ohm subwoofer then presents a 4-ohm final load. Use the supplied components together as the intended system; the package is not designed to be split into separately installed products.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich Ford Bronco models does the FD-PPKT-4 fit?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for 2021–2024 Ford Bronco models with the factory B\u0026amp;O amplified audio system. It does not fit the Ford Bronco Sport.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit work in a two-door Bronco?\u003c\/h3\u003e\n\u003cp\u003eTwo-door installations require modification of the amplifier rack so it clears the panel.\u003c\/p\u003e\n\u003ch3\u003eWhat final subwoofer load does the included wiring connection produce?\u003c\/h3\u003e\n\u003cp\u003eConnecting the dual 2-ohm voice coils in series produces a 4-ohm final load. Follow the kit-specific terminal diagram.\u003c\/p\u003e\n\u003ch3\u003eAre the amplifier power figures all RMS ratings?\u003c\/h3\u003e\n\u003cp\u003eNo. The PB80.6-8DSP-V3 continuous output is specified as 6x80W RMS into 4 ohms, stereo. The PB650.1D-V4 outputs are listed as 325W at 4 ohms, 475W at 2 ohms, and 650W at 1 ohm; their rating type is not specified as RMS.\u003c\/p\u003e\n\u003ch3\u003eWhat does the package include?\u003c\/h3\u003e\n\u003cp\u003eIt includes both amplifiers, six cabin speakers, the subwoofer and sealed enclosure, Axxess A2B interface, vehicle-specific tuning file, installation kit, mounting rack, and step-by-step installation documentation.\u003c\/p\u003e\n\u003ch3\u003eHow long does installation take?\u003c\/h3\u003e\n\u003cp\u003eMetra estimates 6–8 hours for one experienced technician.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the FD-PPKT-4 at 12 Volt Outlet. Want to learn more about Metra? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/metra-electronics-history\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMetra brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VIBE Audio","offers":[{"title":"Default Title","offer_id":67666193776868,"sku":"FD-PPKT-4","price":3267.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/vibe-audio-fd-ppkt-4-manufacturer-view-1_c1545440-5559-4916-b3e1-b8f978ff4ae2.jpg?v=1792708321","url":"https:\/\/www.12voltoutlet.com\/products\/vibe-audio-fd-ppkt-4-ford-bronco-bo-audio-kit","provider":"12 Volt Outlet","version":"1.0","type":"link"}