{"product_id":"vibe-audio-jp-ppkt-1-jeep-wrangler-jl-audio-kit","title":"Metra SoundStage \/ VIBE Audio JP-PPKT-1 Jeep Wrangler JL Audio Kit (2024-up, non-amplified)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a matched audio upgrade for a 2024-up Jeep Wrangler JL with the Metra SoundStage \/ VIBE Audio JP-PPKT-1 complete audio kit. It combines a six-channel DSP amplifier, a mono amplifier, eight cabin speakers and a sealed 12-inch tailgate subwoofer for Wrangler JL models with non-amplified factory audio.\u003c\/p\u003e\n\u003cp\u003eVehicle-specific adapters, mounting racks and wiring are included to connect the system using the vehicle’s original speaker wiring. The package is designed to be installed and used as a complete system, not split into separate products.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched amplification:\u003c\/strong\u003e The PB80.6-8DSP-V3 DSP amplifier and PB650.1D-V4 mono amplifier are supplied together for this system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight cabin speakers:\u003c\/strong\u003e Four 1-inch tweeters and four 6.5-inch drivers cover the front dash and soundbar positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgate subwoofer:\u003c\/strong\u003e The sealed BAMIT12-V4 enclosure includes Jeep-specific brackets for tailgate mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific integration:\u003c\/strong\u003e The plug-in harness connects behind the radio and uses the original speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-matched installation parts:\u003c\/strong\u003e Included racks, adapters, grilles, wiring and hardware support installation in the listed vehicle application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific DSP tuning:\u003c\/strong\u003e Load the supplied equalization file through computer-based software.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKit\u003c\/th\u003e\n\u003ctd\u003eMetra SoundStage \/ VIBE Audio JP-PPKT-1 Jeep Wrangler JL Audio Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003e2024-up Jeep Wrangler JL with non-amplified factory audio; manufacturer Vehicle Applications list: 2024–2026 Jeep Wrangler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExclusions and fitment notes\u003c\/th\u003e\n\u003ctd\u003eNot compatible with Jeep 4xe models. The application entries do not remove the factory-audio, cab\/body-style or exclusion requirements. Confirm any model year later than those listed before ordering. Wranglers with power seats may require a change to amplifier-rack height.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem use\u003c\/th\u003e\n\u003ctd\u003eUse the supplied components together as the intended system. Metra specifies that the package is not designed to be split into separately installed products.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage part numbers\u003c\/th\u003e\n\u003ctd\u003eBLK-JP-PPKT-A: vehicle-specific integration and installation parts; BLK-JP-PPKT-1B: vehicle-specific integration and installation parts; BAMIT12-V4: 12-inch subwoofer enclosure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded items\u003c\/th\u003e\n\u003ctd\u003eOne PB650.1D-V4 mono amplifier; one PB80.6-8DSP-V3 six-channel DSP\/amplifier combination; two 1-inch front dash tweeters; two 6.5-inch front dash panel speakers; two 1-inch soundbar tweeters; two 6.5-inch soundbar speakers; 12-inch subwoofer with enclosure; vehicle-specific DSP tuning file for loading through computer software; application-matched amplifier installation kit; application-matched amp mounting racks; step-by-step installation documentation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch3\u003eAmplifiers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB650.1D-V4\u003c\/td\u003e\n\u003ctd\u003eMaximum power rating: 1200 W. Output at 4 ohms: 325 W (rating type not specified as RMS). Output at 2 ohms: 475 W (rating type not specified as RMS). Output at 1 ohm: 650 W (rating type not specified as RMS). Class D topology. Chassis dimensions (H × W × D): 1.85\" H x 9.05\" W x 5.27\" D (47mm x 230mm x 134mm).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB80.6-8DSP-V3\u003c\/td\u003e\n\u003ctd\u003eSix amplified channels. Maximum power rating: 1200W. Continuous output: 6x80W RMS into 4 ohms, stereo. Specified frequency range: 20Hz – 20kHz. Compact Class D topology. Published dimensions for this kit page (H × W × D): 1.9\" H x 15.4\" W x 5.3\" D (48mm x 391mm x 134mm). Metra gives different dimensions for this same DSP model on other kit pages; confirm chassis clearance before installation. Load the vehicle-specific DSP equalization file using computer-based software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch3\u003eSpeakers and Subwoofer\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecifications and installation parts\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK-V4 front dash tweeters\u003c\/td\u003e\n\u003ctd\u003eTwo 1\" tweeters. Speaker power capacity: 150W Peak \/ 50W RMS. Rated sensitivity: 94dB. Specified frequency range: 1.5kHz - 25kHz. Nominal impedance: 4 ohms. JP-1017 grilles have injection-molded plastic surrounds, silver-painted trim and stamped-steel grille inserts. Installation components: Metra 82-3016 dash tweeter adapter plates and Metra 72-7902 dash tweeter harnesses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOPTI6-V4 front dash panel speakers\u003c\/td\u003e\n\u003ctd\u003eTwo 6.5\" speakers. Speaker power capacity: 270W Peak \/ 90W RMS. Rated sensitivity: 94dB. Specified frequency range: 55Hz – 20kHz. Nominal impedance: 4 ohms. Installation components: Metra JP-1020 left and right lower dash speaker grille cut-ins and Metra JP-1014 lower dash sealed speaker PODs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK-V4 soundbar tweeters\u003c\/td\u003e\n\u003ctd\u003eTwo 1\" tweeters. Speaker power capacity: 150W Peak \/ 50W RMS. Rated sensitivity: 94dB. Specified frequency range: 1.5kHz - 25kHz. Nominal impedance: 4 ohms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOPTI6-V4 soundbar speakers\u003c\/td\u003e\n\u003ctd\u003eTwo 6.5\" speakers. Speaker power capacity: 270W Peak \/ 90W RMS. Rated sensitivity: 94dB. Specified frequency range: 55Hz – 20kHz. Nominal impedance: 4 ohms. Installation component: Metra JP-1019 soundbar speaker kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBAMIT12-V4 subwoofer and sealed enclosure\u003c\/td\u003e\n\u003ctd\u003e12\" subwoofer. Speaker power capacity: 900W Peak \/ 300W RMS. Rated sensitivity: 85dB. Nominal impedance: Dual 2 ohm. A metal protective speaker grille is supplied. Jeep-specific brackets locate the enclosure on the tailgate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch3\u003eIntegration and Installation Hardware\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra vehicle-specific amplifier interface\u003c\/td\u003e\n\u003ctd\u003ePlug-in integration connections. Installation position: behind the radio. Supplied connections: T-harness and original-equipment-style connectors. Connects using the vehicle’s original speaker wiring; the harness plugs into the DSP amplifier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra amplifier installation kit\u003c\/td\u003e\n\u003ctd\u003eWiring package matched to this application. 4-gauge OFC power wire: 9.5 ft. 8-gauge OFC power wire: 8 ft. 12-gauge OFC speaker wire: 12 ft. Fuse protection: T-Spec VMANL watertight fuse holder with 100A MANL fuse. Power distribution block included. Installation fasteners\/hardware supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra vehicle-specific amp mounting racks\u003c\/td\u003e\n\u003ctd\u003eMounting design specific to the listed vehicle application. Black powder-coated mounting plates. Racks fit under the seats and accommodate compact amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer installation estimate\u003c\/td\u003e\n\u003ctd\u003eMetra estimates 6–8 hours for one experienced technician.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer warranty\u003c\/td\u003e\n\u003ctd\u003eOne-year warranty for the kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe ratings above belong to the named components. Peak or maximum figures are not a continuous system rating; an output is labeled RMS only where the source explicitly identifies it that way.\u003c\/p\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThis kit brings the amplifiers, speakers, subwoofer and vehicle-specific integration parts together as one planned upgrade. Its DSP tuning file is matched to the vehicle application, while the supplied harness connects to the non-amplified factory system through the original speaker wiring.\u003c\/p\u003e\n\u003cp\u003eThe sealed enclosure mounts at the tailgate, but its installation makes the JL Cargo Trail Rail inaccessible. Consider that trade-off when planning how you use the cargo area.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cp\u003eFor the subwoofer, connect its two 2-ohm voice coils in series to create a 4-ohm final load. Follow the current installation guide for this exact kit and its wiring diagram; do not use a standalone enclosure’s alternative 1-ohm configuration for this system.\u003c\/p\u003e\n\u003cp\u003eVIBE recommends unplugging the original JL\/JLU factory subwoofer. Follow this complete kit’s amplifier-bypass and wiring instructions for the specified factory audio system. Confirm vehicle fitment, mounting clearance and the latest installation steps before starting. Power-seat vehicles may require a change to amplifier-rack height.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich Jeep Wrangler models does the JP-PPKT-1 fit?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for 2024-up Jeep Wrangler JL models with non-amplified factory audio. The manufacturer’s Vehicle Applications list identifies 2024–2026 Jeep Wrangler. It is not compatible with Jeep 4xe models.\u003c\/p\u003e \u003ch3\u003eWhat final impedance should the included subwoofer use?\u003c\/h3\u003e\n\u003cp\u003eConnect the BAMIT12-V4’s two 2-ohm voice coils in series for a 4-ohm final load. Use this kit’s wiring diagram and instructions.\u003c\/p\u003e \u003ch3\u003eCan I install the components separately?\u003c\/h3\u003e\n\u003cp\u003eNo. Metra specifies that this package is intended to be used as a complete system, not split into separately installed products.\u003c\/p\u003e \u003ch3\u003eWill the subwoofer affect cargo access?\u003c\/h3\u003e\n\u003cp\u003eYes. Installing the included BAMIT12-V4 enclosure makes the JL Cargo Trail Rail inaccessible.\u003c\/p\u003e \u003ch3\u003eDo the amplifier dimensions require a clearance check?\u003c\/h3\u003e\n\u003cp\u003eYes. Confirm chassis clearance before installation. Metra publishes different dimensions for the PB80.6-8DSP-V3 on other kit pages, and power seats may require an amplifier-rack height change.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Metra SoundStage \/ VIBE Audio JP-PPKT-1 at 12 Volt Outlet. Want to learn more about Metra? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/metra-electronics-history\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMetra brand profile\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VIBE Audio","offers":[{"title":"Default Title","offer_id":67666198528228,"sku":"JP-PPKT-1","price":2407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/vibe-audio-JP-PPKT-1-manufacturer-view-1.jpg?v=1792709130","url":"https:\/\/www.12voltoutlet.com\/products\/vibe-audio-jp-ppkt-1-jeep-wrangler-jl-audio-kit","provider":"12 Volt Outlet","version":"1.0","type":"link"}