{"product_id":"vibe-audio-jp-ppkt-4-jeep-wrangler-jl-amplified-audio-kit","title":"Metra SoundStage \/ VIBE Audio JP-PPKT-4 Jeep Wrangler JL Audio Kit (2018–2023, factory-amplified)","description":"\u003cdiv\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eBuild a coordinated audio upgrade for a factory-amplified 2018–2023 Jeep Wrangler JL with the Metra SoundStage \/ VIBE Audio JP-PPKT-4 audio kit. It combines two amplifiers, eight cabin speakers, a sealed 12-inch tailgate subwoofer, vehicle-specific integration parts, and installation hardware.\u003c\/p\u003e\n\u003cp\u003eThe system is designed for the listed factory-amplified configuration. Its supplied interface and bypass harness connect the new system to the vehicle-specific audio setup.\u003c\/p\u003e \u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo amplifiers:\u003c\/strong\u003e The six-channel DSP amplifier and dedicated mono amplifier serve the system’s cabin speakers and subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight cabin speakers:\u003c\/strong\u003e Four 1-inch tweeters and four 6.5-inch drivers are supplied for the front dash and soundbar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgate subwoofer:\u003c\/strong\u003e The sealed 12-inch enclosure includes Jeep-specific tailgate mounting brackets and a metal protective grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-audio integration:\u003c\/strong\u003e The Metra AXAMP interface, T-harness, and bypass harness are matched to the factory-amplified configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific mounting parts:\u003c\/strong\u003e The package includes under-seat amplifier racks, speaker adapters, pods, grilles, and wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP tuning file:\u003c\/strong\u003e Load the supplied vehicle-specific equalization file using computer-based software.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eSpecifications and supplied parts\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB650.1D-V4 mono amplifier\u003c\/td\u003e\n\u003ctd\u003eMaximum power rating: 1200W. Output at 4 ohms: 325W (rating type not specified as RMS). Output at 2 ohms: 475W (rating type not specified as RMS). Output at 1 ohm: 650W (rating type not specified as RMS). Chassis dimensions (H × W × D): 1.85\" H x 9.05\" W x 5.27\" D (47mm x 230mm x 134mm). Amplifier topology: Class D.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePB80.6-8DSP-V3 DSP and amplifier combo\u003c\/td\u003e\n\u003ctd\u003eAmplified channels: 6. Maximum power rating: 1200W. Continuous output: 6x80W RMS into 4 ohms, stereo. Specified frequency range: 20Hz – 20kHz. Published dimensions for this kit page (H × W × D): 1.9\" H x 15.4\" W x 5.3\" D (48mm x 391mm x 134mm). Metra gives different dimensions for this same DSP model on other kit pages; confirm chassis clearance before installation. Compact Class D amplifier topology. Load the vehicle-specific DSP equalization file using computer-based software.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK-V4 1\" front dash tweeters\u003c\/td\u003e\n\u003ctd\u003eTwo supplied. Nominal driver size: 1\". Speaker power capacity: 150W Peak \/ 50W RMS. Rated sensitivity: 94dB. Specified frequency range: 1.5kHz - 25kHz. Nominal impedance: 4 ohms. JP-1017 grilles: injection-molded plastic surrounds, silver-painted trim and stamped-steel grille inserts. Installation components: Metra 82-3016 dash tweeter adapter plates and Metra 72-7902 dash tweeter harnesses.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOPTI6-V4 6.5\" front dash panel speakers\u003c\/td\u003e\n\u003ctd\u003eTwo supplied. Nominal driver size: 6.5\". Speaker power capacity: 270W Peak \/ 90W RMS. Rated sensitivity: 94dB. Specified frequency range: 55Hz – 20kHz. Nominal impedance: 4 ohms. Installation components: Metra JP-1018 left and right lower dash speaker grille cut-ins and Metra JP-1014 lower dash sealed speaker PODs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLICK-V4 1\" soundbar tweeters\u003c\/td\u003e\n\u003ctd\u003eTwo supplied. Nominal driver size: 1\". Speaker power capacity: 150W Peak \/ 50W RMS. Rated sensitivity: 94dB. Specified frequency range: 1.5kHz - 25kHz. Nominal impedance: 4 ohms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOPTI6-V4 6.5\" soundbar speakers\u003c\/td\u003e\n\u003ctd\u003eTwo supplied. Nominal driver size: 6.5\". Speaker power capacity: 270W Peak \/ 90W RMS. Rated sensitivity: 94dB. Specified frequency range: 55Hz – 20kHz. Nominal impedance: 4 ohms. Installation components: Metra JP-1015 soundbar speaker kit and Metra BC-SPG universal speaker grilles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBAMIT12-V4 sealed enclosure subwoofer\u003c\/td\u003e\n\u003ctd\u003e12\" subwoofer. Speaker power capacity: 900W Peak \/ 300W RMS. A metal protective speaker grille is supplied. Jeep-specific brackets locate the enclosure on the tailgate. Rated sensitivity: 85dB. Nominal impedance: Dual 2 ohm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra AXAMP vehicle-specific amplifier interface\u003c\/td\u003e\n\u003ctd\u003eIntegration wiring uses plug-in connections. Interface\/harness installation position: behind the radio. Supplied connections: T-harness and original-equipment-style connectors. Interface programming is supplied; RCA connections are included.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra amplifier installation kit\u003c\/td\u003e\n\u003ctd\u003eThe wiring package is matched to this application. The supplied bypass harness removes the original amplifier from the new audio signal path. 4-gauge OFC power wire: 9.5 ft. 8-gauge OFC power wire: 8 ft. 12-gauge OFC speaker wire: 12 ft. Fuse protection: T-Spec VMANL watertight fuse holder with 100A MANL fuse. Power distribution block included. Installation fasteners\/hardware are supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetra vehicle-specific amp mounting racks\u003c\/td\u003e\n\u003ctd\u003eMounting design is specific to the listed vehicle application. Mounting plates have a black powder-coated finish. The racks fit under the seats and accommodate compact amplifiers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage components and part numbers\u003c\/td\u003e\n\u003ctd\u003eOne PB650.1D-V4 mono amplifier. One PB80.6-8DSP-V3 six-channel DSP\/amplifier combination. Two 1\" front dash tweeters. Two 6.5\" front dash panel speakers. Two 1\" soundbar tweeters. Two 6.5\" soundbar speakers. 12\" subwoofer with enclosure. Vehicle-specific DSP tuning file for loading through computer software. Application-matched amplifier installation kit. Application-matched amp mounting racks. Metra amplifier integration interface. Step-by-step installation documentation. Complete system package part numbers: BLK-JP-PPKT-A: vehicle-specific integration and installation parts; BLK-JP-PPKT-4B: vehicle-specific integration and installation parts; BAMIT12-V4: 12\" subwoofer enclosure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRatings and installation information\u003c\/td\u003e\n\u003ctd\u003eThe ratings above belong to the named components. Peak or maximum figures are not a continuous system rating; an output is labeled RMS only where the source explicitly identifies it that way. Metra estimates 6–8 hours for one experienced technician. The manufacturer lists a one-year warranty for the kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e \u003ch2\u003eWhy Choose This Product?\u003c\/h2\u003e\n\u003cp\u003eThe JP-PPKT-4 brings the amplification, cabin speakers, subwoofer, integration interface, and vehicle-specific mounting parts together as one matched package. That makes it a system-level option rather than a set of products intended for separate installation.\u003c\/p\u003e\n\u003cp\u003eThe DSP combination provides six amplified channels and a vehicle-specific tuning file. The sealed subwoofer enclosure mounts at the tailgate, while the amplifier racks are designed for under-seat placement.\u003c\/p\u003e \u003ch2\u003eInstallation \u0026amp; Compatibility Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle fitment:\u003c\/strong\u003e For 2018–2023 Jeep Wrangler JL models with the factory-amplified factory audio configuration. Manufacturer vehicle applications list 2018–2023 Jeep Wrangler; the factory-audio, cab\/body-style, and exclusion requirements above still apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusion:\u003c\/strong\u003e Not compatible with Jeep 4xe models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer wiring:\u003c\/strong\u003e Connect the subwoofer’s two 2-ohm voice coils in series for a 4-ohm final load. Follow the current installation guide for this exact kit and its wiring diagram. Do not use a standalone enclosure’s alternative 1-ohm configuration for this system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory subwoofer:\u003c\/strong\u003e VIBE recommends unplugging the original JL\/JLU factory subwoofer. Follow this complete kit’s amplifier-bypass and wiring instructions for the specified factory audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailgate clearance:\u003c\/strong\u003e Installing the included BAMIT12-V4 enclosure makes the JL Cargo Trail Rail inaccessible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier clearance:\u003c\/strong\u003e Confirm chassis clearance before installation. Published dimensions for the PB80.6-8DSP-V3 on this kit page differ from dimensions Metra gives for the same model on other kit pages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem configuration:\u003c\/strong\u003e Use the supplied components together as the intended system. Metra specifies that the package is not designed to be split into separately installed products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm vehicle fitment, mounting clearance, and the latest installation steps before starting. Metra estimates 6–8 hours for one experienced technician.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich Jeep Wrangler models does the JP-PPKT-4 fit?\u003c\/h3\u003e\n\u003cp\u003eIt is for 2018–2023 Jeep Wrangler JL models with the factory-amplified factory audio configuration. It is not compatible with Jeep 4xe models.\u003c\/p\u003e\n\u003ch3\u003eWhat final impedance does the subwoofer require in this kit?\u003c\/h3\u003e\n\u003cp\u003eConnect its two 2-ohm voice coils in series for a 4-ohm final load. Use the current guide and wiring diagram for this exact kit, not the standalone enclosure’s alternative 1-ohm configuration.\u003c\/p\u003e\n\u003ch3\u003eCan I install the kit’s components separately?\u003c\/h3\u003e\n\u003cp\u003eNo. Metra specifies that this package is intended to be used together, not split into separately installed products.\u003c\/p\u003e\n\u003ch3\u003eWill the tailgate enclosure affect the JL Cargo Trail Rail?\u003c\/h3\u003e\n\u003cp\u003eYes. Installing the included BAMIT12-V4 enclosure makes the JL Cargo Trail Rail inaccessible.\u003c\/p\u003e\n\u003ch3\u003eDoes the package include the factory-audio integration parts?\u003c\/h3\u003e\n\u003cp\u003eYes. It includes the Metra AXAMP interface, T-harness, original-equipment-style connectors, RCA connections, and an amplifier-bypass harness.\u003c\/p\u003e\n\u003ch3\u003eWhat do the amplifier power ratings mean?\u003c\/h3\u003e\n\u003cp\u003eThe stated ratings apply to the named components. Peak and maximum figures are not continuous system ratings. Only the PB80.6-8DSP-V3 output is explicitly identified as RMS among the amplifier output figures.\u003c\/p\u003e \u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cp\u003eShop the Metra SoundStage \/ VIBE Audio JP-PPKT-4 at 12 Volt Outlet. Want to learn more about Metra? Explore our \u003ca href=\"https:\/\/www.12voltoutlet.com\/pages\/metra-electronics-history\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMetra brand profile\u003c\/a\u003e (opens in a new tab).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"VIBE Audio","offers":[{"title":"Default Title","offer_id":67666201706724,"sku":"JP-PPKT-4","price":2407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0842\/2522\/9028\/files\/vibe-audio-JP-PPKT-4-manufacturer-view-1.jpg?v=1792708238","url":"https:\/\/www.12voltoutlet.com\/products\/vibe-audio-jp-ppkt-4-jeep-wrangler-jl-amplified-audio-kit","provider":"12 Volt Outlet","version":"1.0","type":"link"}