American Bass HD Series 12" Subwoofer
Key features
- Subwoofer size: 12.0 inches
- RMS power per subwoofer: 2000 W
- Voice-coil options: D1, D2
- Mounting depth: 8.38 inches
- Cutout size: 11.4 inches
- Voice-coil diameter: 3.3 inches
American Bass HD Series 12" Subwoofer - Dual 1 Ohm is backordered and will ship as soon as it is back in stock.
American Bass HD Series 12" Subwoofer - Dual 1 Ohm is backordered and will ship as soon as it is back in stock.
Description
Description
The American Bass HD Series 12" Subwoofer is a heavy-duty 12-inch driver engineered for hardcore car audio installations, delivering gut-wrenching bass and reliable high-power handling for serious enthusiasts.
- RMS Power: 2000W continuous power handling, meaning it can sustain high-output playback without bottoming out when driven by an appropriate amplifier.
- Max Power: 4000W peak, providing headroom for brief dynamic bursts and transients without clipping when the amp supply spikes.
- Impedance (OHMS): D1 / D2, offering dual-impedance options for flexible wiring and amplifier matching.
- Sensitivity: 86.5 dB, indicating how effectively the woofer converts input power into SPL; actual output depends on enclosure and power used.
- Mounting Depth: 8.38 in, a practical depth consideration for fitment behind factory panels or in shallow mounting locations.
- Cutout Size: 11.4 in, the required hole diameter for installation in an enclosure or mounting surface.
- Ported Box (FT3): 2.25 – 2.75 ft³, the recommended enclosure volume range to optimize bass output and port tuning in a ported design.
- Magnet Size: 350 oz, providing substantial motor strength for controlled cone motion under high power.
- Voice Coil Size: 3 in, a large diameter coil for improved heat dissipation and power handling during extended high‑level playback.
- Basket Type: Cast, offering rigid support for high excursion and durability in demanding install environments.
- Recommended Amp (Pair): VFL 4K, the suggested amplifier pairing for a two‑subwoofer configuration to achieve balanced, high‑output performance.
In a real car audio build, this subwoofer excels in a ported enclosure around 2.25–2.75 ft³ and benefits from the strong 350 oz magnet and 3" voice coil for sustained bass control at high power. The cast basket and dual-impedance wiring options enable a robust, flexible setup when paired with a high‑performance amp like the VFL 4K across a pair, delivering loud, low-distortion bass suitable for enthusiasts chasing deep, accurate low-end impact.
| RMS POWER | 2000W |
| MAX POWER | 4000W |
| IMPEDANCE (OHMS) | D1 / D2 |
| SENSITIVITY DB | 86.5 |
| MOUNTING DEPTH (IN) | 8.38 |
| CUTOUT SIZE (IN) | 11.4 |
| PORTED BOX (FT3) | 2.25 - 2.75 |
| MAGNET SIZE (OZ) | 350 |
| VOICE COIL SIZE | 3 |
| BASKET TYPE | CAST |
| RECOMMENDED AMP (PAIR) |
VFL 4K |
Recommended Monoblock Amplifiers
Power-matched options for one subwoofer or one complete loaded enclosure. We aim to include same-brand choices when their ratings qualify.
Loading amplifier suggestions…
Suggestions use 75–125% of the subwoofer’s RMS rating at the wiring load shown. Check wiring, enclosure needs, electrical capacity and installation space. Set gain and filters correctly to avoid overpowering the subwoofer. Buying more than one subwoofer changes the match.



