Bulk Wire - Other

Our bulk multi-conductor wire is for installers who want several low-current or speaker-level runs routed together. The Elite Audio EA-9W18G-100 combines nine 18-gauge OFC conductors in a 100-foot roll, useful for organized audio wiring where each conductor suits the job.

Plan Nine-Conductor Speed Wire Runs

Start with a wiring map. Assign each conductor a purpose, label both ends, and keep polarity consistent from source to destination. This makes troubleshooting easier after the cable is routed and trimmed. The Elite Audio EA-9W18G-100 speed wire keeps multiple paths in one jacket, but the bundled format does not increase an individual conductor's capacity.

Use the cable only for applications recommended for the wire and compatible with your equipment. Compare the conductor gauge and run length with the circuit's current demand. An 18-gauge conductor can suit some speaker-level or low-current signals, but it is not a replacement for an amplifier's correctly sized power and ground leads.

Route and Terminate Each Conductor Carefully

• Label both ends: Mark each wire before routing so channels and polarity stay clear.
• Protect the jacket: Keep the cable clear of sharp edges, heat, and moving parts.
• Make secure connections: Strip only enough insulation for the terminal, then insulate exposed conductor.
• Keep circuits distinct: Do not assume spare conductors can be combined to carry more current.

For a straightforward speaker run, compare this nine-conductor cable with our bulk speaker wire. For heavier amplifier feeds, use power wire sized for the amplifier's current draw and cable length, not this 18-gauge speed wire. The 100-foot Elite Audio roll is best planned around the number and route of the individual circuits you need.

Choose Wire for the Circuit

Before connecting anything, confirm the cable's recommended applications and the equipment's wiring requirements. Keep signal, speaker, and power wiring identified throughout the install, and use suitable terminals for each connection. If the run needs a dedicated power feed, our bulk power wire serves that job. For connectors and other install components, see wiring accessories.