Massive Audio H124XR - 12" 3000 Watts RMS Dual 4 Ohm 4" V.C. Mega 70 Lbs. Subwoofer
Key features
- Subwoofer size: 12.0 inches
- RMS power per subwoofer: 3000 W
- Voice-coil options: D4
- Voice-coil diameter: 4 inches
- Cone: Non-Pressed Paper
- Basket: Cast Aluminum
Massive Audio H124XR - 12" 3000 Watts RMS Dual 4 Ohm 4" V.C. Mega 70 Lbs. Subwoofer is backordered and will ship as soon as it is back in stock.
Massive Audio H124XR - 12" 3000 Watts RMS Dual 4 Ohm 4" V.C. Mega 70 Lbs. Subwoofer is backordered and will ship as soon as it is back in stock.
Description
Description
Massive Audio H124XR is a 12-inch high-output subwoofer built for competition-grade bass and premium daily-drive systems. Weighing roughly 70 lbs, it combines a 4" dual 4-ohm voice coil with a 377 oz Sr magnet to deliver 3000W RMS of continuous power with tight, deep bass.
- Size: 12" cone diameter for deep bass and strong excursion in car enclosures.
- RMS Watts: 3000W continuous power handling, enabling sustained high-output bass when driven by a capable amplifier.
- Peak Watts: 6000W peak power rating for brief transients and dynamic boosts.
- Voice Coil: 4" Dual 4 Ohm voice coil provides flexible wiring options to match amplifiers and desired impedance.
- Cone: Kevlar fiber reinforced non-pressed paper cone yields rigidity for precise bass with natural tone.
- Surround: Tall and narrow foam surround supports long linear excursion while maintaining controlled behavior.
- Magnet: 377 oz strontium magnet supplies strong magnetic field for consistent control at high power.
- Heat & Ventilation: Vented back plate and basket help manage heat during long high-output sessions.
- Terminals: Heavy-duty direct input wires connection for secure, low-resistance wiring.
- Basket: Cast aluminum basket provides rigidity with light weight to minimize unwanted vibrations.
- Tinsel Leads: Heavy-duty triple leads ensure reliability at high excursion.
- X-Max: 21.6 mm maximum linear excursion for deep bass and dynamic control.
- SPL: 93.54 dB sensitivity indicating relatively efficient, high-output performance.
- Enclosure Options: Ported Box and Sealed Box configurations; See User Guide PDF for details.
- Fs: 43 Hz resonant frequency, indicating strong low-end extension with the right enclosure.
- Additional Design Notes: Anodized aluminum former on the voice coil; Kevlar spunlace; dual Nomex spiders; high-roll surround; cast aluminum basket with red stitching and fiberglass woven dust cap; pre-installed heavy-gauge direct leads.
In a properly tuned enclosure and paired with a capable high-current amplifier, the H124XR delivers deep, controlled bass with substantial headroom. It suits competition builds and premium daily-driver systems where power handling, durability, and precise bass articulation are essential.
| Size | 12" |
| Peak Watts | 6000 |
| RMS Watts | 3000 |
| Cone | Non-Pressed Paper |
| Voice Coil | 4" Dual 4 Ohm |
| Surround | Tall and Narrow Foam |
| Magnet | 377oz Strontium |
| Terminals | Heavy Duty Direct Input Wires Connection |
| Basket | Cast Aluminum |
| Tinsel Leads | Heavy Duty Triple |
| X-Max | 21.6mm |
| SPL | 93.54dB |
| Ported Box | See User Guide PDF |
| Sealed Box | See User Guide PDF |
| Fs | 43Hz |
| Re | See User Guide PDF |
| Le | See User Guide PDF |
| BL | See User Guide PDF |
| Qms | 3.119 |
| Qes | See User Guide PDF |
| Qts | See User Guide PDF |
| Vas | 16.841 L |
| Cms | 42.1 um/N |
| Mms | 324.295 g |
| Sd | 0.053 sq cm |
| Vd | 1.146 L |
Recommended Monoblock Amplifiers
Power-matched options for one subwoofer or one complete loaded enclosure. We aim to include same-brand choices when their ratings qualify.
Loading amplifier suggestions…
Suggestions use 75–125% of the subwoofer’s RMS rating at the wiring load shown. Check wiring, enclosure needs, electrical capacity and installation space. Set gain and filters correctly to avoid overpowering the subwoofer. Buying more than one subwoofer changes the match.




