Audiopipe APHF-8000D-H1 8000 Watts Full Range Class D Mosfet Amplifier
Key features
- Amplifier channels: 1
- RMS output at 4 ohms: 2500.0 W
- RMS output at 2 ohms: 4800 W
- RMS output at 1 ohm: 8000 W
- FREQUENCY RESPONSE: 10Hz-20KHz
Audiopipe APHF-8000D-H1 8000 Watts Full Range Class D Mosfet Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Bring high-output, full-range amplification to your car audio system with the Audiopipe APHF-8000D-H1. This Class D MOSFET mono amplifier combines full-bridge technology with a compact heatsink design and delivers up to 8000 watts of maximum power output.
Its frequency range and adjustable high-pass and low-pass filters support a range of audio setups. The included remote bass control lets you adjust bass from the driver’s seat, while the clip indicator helps you monitor the signal.
Key Features & Benefits
- Full-bridge Class D design: PWM and BTL circuitry combine dual internal amplifiers to deliver high output in a compact footprint.
- Remote bass control: Adjust bass level from the driver’s seat without reaching the amplifier.
- Clip and power indicators: Check the amplifier’s status and monitor for clipping.
- Protection system: Overload and thermal protection help guard the amplifier during operation.
- Adjustable filters: High-pass and low-pass controls let you set the stated frequency ranges for your system.
Technical Specifications
| Product type | Full Range Class D MOSFET Mono Amplifier |
|---|---|
| Maximum power output | Up to 8000 Watts |
| Continuous power output | RMS @ 4 Ohm (<1% DISTORTION): 2500W (14.4V) |
| Continuous power output | RMS @ 2 Ohm (<1% DISTORTION): 4800W (14.4V) |
| Continuous power output | RMS @ 1 Ohm (<1% DISTORTION): 8000W (14.4V) |
| Frequency response | 10Hz-20KHz |
| Signal to noise ratio | ≥85dB |
| Input sensitivity | 0.25 - 4V |
| High pass | 10Hz-80Hz 12dB/Octave |
| Low pass | 80Hz-20KHz 12dB/Octave |
| Bass boost | 0-12 dB @ 35Hz-90Hz |
| Overload protection | Equipped |
| Overheat protection | Advanced heatsink designed to provide overheat protection |
| Over-voltage protection | 16V |
| Under-voltage protection | 9V |
| Remote control and indicators | Remote subwoofer volume control knob, clip LED, and power on/off LED indicator |
| Dimensions (L x W x H) | 13.7" x 9" x 2.9" (349 x 229 x 73 mm) |
Why Choose This Product?
The APHF-8000D-H1 is designed for listeners seeking powerful full-range amplification in a Class D mono format. Its filter controls and bass boost offer adjustment options, while the remote control and clip indicator make key settings and status easier to monitor from the driver’s seat.
Power ratings vary by load and are measured at 14.4V. Use the rating that matches your system’s impedance when assessing whether this amplifier suits your setup.
Installation & Compatibility Notes
Check your system’s speaker or subwoofer impedance against the amplifier’s rated loads before installation. The continuous power figures are specified at 14.4V, so consider that stated supply voltage when planning your system.
Measure the available mounting space against the amplifier’s listed dimensions. Confirm your planned connections and installation requirements before purchase.
Frequently Asked Questions
What does the 8000-watt rating mean?
The product is described as delivering up to 8000 watts maximum output. Its listed continuous rating at 1 ohm is 8000W RMS at 14.4V and under 1% distortion.
What are the RMS power ratings at different impedances?
The listed ratings are 2500W RMS at 4 ohms, 4800W RMS at 2 ohms, and 8000W RMS at 1 ohm. Each is specified at 14.4V and under 1% distortion.
Can I adjust bass from the driver’s seat?
Yes. The amplifier is equipped with a remote subwoofer volume control knob, along with clip and power on/off LED indicators.
What space should I allow for installation?
The amplifier measures 13.7" x 9" x 2.9" (349 x 229 x 73 mm). Check the mounting area against these dimensions before installation.
Explore More
Explore the Audiopipe brand profile to learn more about the brand, and shop 12 Volt Outlet for your car audio system.
