DC Audio 3.5k 3500 watt Mono Block Amplifier
Key features
- Amplifier channels: 1
- RMS output at 4 ohms: 750.0 W
- RMS output at 2 ohms: 1800 W
- RMS output at 1 ohm: 3500 W
DC Audio 3.5k 3500 watt Mono Block Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Build a dedicated subwoofer system around the DC Audio 3.5k 3500 watt mono block amplifier. Its 1-ohm stability, adjustable filters, and linkable Master/Slave operation give you control over a demanding bass setup.
Use it as a single amplifier for a high-power subwoofer or pair it with a second unit for a linked system rated up to 11,000 watts.
Key Features & Benefits
- 1-ohm stability: Supports low-impedance speaker loads for high-current subwoofer builds.
- Adjustable crossover and subsonic filter: Set the low-pass range from 35 Hz to 250 Hz and the subsonic filter from 10 Hz to 50 Hz.
- Bass shaping: Adjust bass boost from 0 to 9 dB at 45 Hz and phase shift from 0 to 180.
- Linked operation: Master/Slave capability supports pairing two amplifiers for a larger system.
- System connections: RCA pass-through supports signal routing to additional amplifiers.
- Driver-seat adjustments: The included wired remote lets you adjust bass level, while the clip indicator helps monitor gain setting.
Technical Specifications
| DC Amp Model: | 3.5k |
|---|---|
| Input Sensitivity | 6V~0.2V |
| Frequency Response | 20Hz~250Hz |
| 24dB / Octave Crossover | YES |
| Low Pass | 35Hz ~ 250Hz |
| Subsonic Filter | 10Hz-50hz |
| Bass Boost @45hz | 0 ~ 9db |
| Phase Shift | 0 ~ 180 |
| Remote Control | Yes |
| Clip Indicator | Yes |
| Signal to Noise Ratio | dB100 |
| Damping Factor | 200< |
| THD @ 4ohms | Less than 0.1% |
| Fuse Rating | External 350 amp |
| LED Status Lights | Power and Protect |
| Master/Slave | YES |
| Heatsink Length | 21.26"/540mm |
| Heatsink Width | 9.38"/238mm |
| Heatsink Height | 2.35"/59.6mm |
- Rated power: 3500 watts; up to 11,000 watts when paired with a second unit.
- Speaker load: 1-ohm stable.
- Connections: 1/0 AWG power and ground inputs, 8 AWG speaker terminals, and RCA pass-through.
Why Choose This Product?
The DC Audio 3.5k combines subwoofer-focused filtering with bass and phase adjustments, helping you tune the signal to your system. Its Master/Slave capability gives you the option to build around one amplifier or expand with a second.
Installation & Compatibility Notes
Plan space for the heatsink, which measures 21.26 inches long, 9.38 inches wide, and 2.35 inches high. The amplifier has 1/0 AWG power and ground inputs, 8 AWG speaker terminals, and an external 350 amp fuse rating.
Confirm your subwoofer’s impedance, system wiring, and available mounting space before installation. The product details identify 1-ohm stability and linked operation; follow the amplifier’s installation instructions when configuring either setup.
Frequently Asked Questions
Can the DC Audio 3.5k operate at 1 ohm?
Yes. It is specified as 1-ohm stable.
Can I link two amplifiers?
Yes. Master/Slave operation supports a paired setup, rated up to 11,000 watts with a second unit.
What filter adjustments are available?
The low-pass crossover adjusts from 35 Hz to 250 Hz, and the subsonic filter adjusts from 10 Hz to 50 Hz. Bass boost is adjustable from 0 to 9 dB at 45 Hz.
What wiring connections does it use?
It has 1/0 AWG power and ground inputs, 8 AWG speaker terminals, and RCA pass-through.
What are the heatsink dimensions?
It measures 21.26 inches long, 9.38 inches wide, and 2.35 inches high.
Explore More
Shop with 12 Volt Outlet for your car audio system. Want to learn more about DC Audio? Explore the brands we sell.
