JBL Stage GT 60041 4-Channel Class-D Car Amplifier
Key features
- Amplifier channels: 4
- RMS per channel at 4 ohms: 65 W
- RMS per channel at 2 ohms: 90 W
- Frequency response (±1 dB): 20 Hz–20 kHz
- High/low-pass filters: Variable 32–320 Hz
- Bass boost: Variable 0–12 dB at 45 Hz
JBL Stage GT 60041 4-Channel Class-D Car Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Give your car speakers dedicated amplification with the JBL STAGE GT 60041 4-channel Class-D car amplifier. Its compact design, flexible input options, and adjustable sound controls make it suitable for a four-speaker setup or a system that includes a bridged subwoofer channel pair.
Key Features & Benefits
- Class-D design: Efficient operation helps limit heat and current draw in a compact amplifier chassis.
- Flexible channel setup: Run four channels for speakers or bridge two channels for a subwoofer configuration.
- High- and low-level inputs: Connect with a compatible factory head unit or aftermarket source.
- Adjustable bass EQ: Set the 45Hz bass boost from 0 to 12dB to tailor low-frequency output.
- Variable crossover: Use high-pass or low-pass filtering across the 32Hz–320Hz range for system integration.
- Protection circuitry: DCP, OVP, UVP, OCP, and OTP protection address specified electrical and temperature conditions.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | JBL |
| Model | STAGE GT 60041 |
| Amplifier Class | Class-D |
| Channels | 4 |
| Power Output (4Ω) | 65W RMS x4 |
| Power Output (2Ω) | 90W RMS x4 |
| Power Output (Bridged 4Ω) | 180W RMS x2 |
| Peak Power | 1,240W |
| Frequency Response | 20Hz – 20kHz (±1dB) |
| THD+N @ ROP | 1% |
| Input Sensitivity (Low) | 1V – 25V |
| Input Sensitivity (High) | 0.2V – 5V |
| Crossover (Variable) | 32Hz – 320Hz (HP/LP) |
| Bass EQ | 0 – 12dB @ 45Hz |
| Protection | DCP, OVP, UVP, OCP, OTP |
| Operating Voltage | 9V – 16V |
| Fuse Rating | 20A x2 |
| Shipping Weight | 2.2 kg |
Why Choose This Product?
The STAGE GT 60041 gives you options as your system takes shape. Use all four channels for front and rear speakers, or bridge a pair of channels for a subwoofer configuration. Its adjustable bass EQ and crossover let you shape the signal at the amplifier rather than relying only on fixed settings.
JBL Stage3 and Club Series speakers are suggested pairings in the product information. The amplifier is also described as suitable for JBL 3-ohm Club and Stadium Series drivers.
Installation & Compatibility Notes
The 9V–16V operating range is specified for compatibility with modern start-stop vehicle electrical systems. The compact chassis may suit installation under a seat, behind a panel, or in a trunk; check the available mounting space in your vehicle.
- Power wiring: The product information recommends 4-gauge power and ground wire for runs up to 12 feet, and 2-gauge for longer runs or high-demand installations.
- Fuse placement: The stated fuse rating is 20A x2, with the fuse placed within 18 inches of the battery.
- Four-speaker setup: The source recommends a high-pass crossover setting of 80–100Hz to protect speakers from low-frequency content.
- Subwoofer setup: The source describes bridging channels 3+4 for a 4Ω mono subwoofer load and using channels 1+2 for the front stage.
Frequently Asked Questions
Can I connect the Stage GT 60041 to a factory head unit?
Yes. Its high-level input sensitivity is listed as 0.2V–5V for connection to factory speaker outputs.
Can I bridge this amplifier for a subwoofer?
Yes. The listed bridged output is 180W RMS x2 at 4Ω. The product information describes bridging channels 3+4 for a subwoofer configuration.
Can I use it in a start-stop vehicle?
The specified operating voltage is 9V–16V, and the product information identifies the amplifier as compatible with modern start-stop electrical systems.
Will it fit under my seat?
The compact chassis is described as suitable for under-seat installation. Check your available space and mounting requirements before choosing a location.
Which JBL speakers are suggested with this amplifier?
JBL Stage3 and Club Series speakers are suggested pairings. The source also identifies JBL 3-ohm Club and Stadium Series drivers as compatible options.
Explore More
Explore the JBL brand profile to learn more about JBL. Shop 12 Volt Outlet for car audio components to build around your system.
