Deaf Bonce MACHETE MFA-2.80 | 80 Watt 2-channel amplifier
Deaf Bonce MACHETE MFA-2.80 | 80 Watt 2-channel amplifier is backordered and will ship as soon as it is back in stock.
Care information
Care information
Display general product information or specific product information using metafields.
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Deaf Bonce MACHETE MFA-2.80 | 80 Watt 2-channel amplifier is backordered and will ship as soon as it is back in stock.
Highlight title
Text to highlight a key feature of your product
Description
Description
Deaf Bonce MACHETE MFA-2.80 is a compact 2-channel Class D amplifier designed for high-current car audio installs, delivering 120 W x 2 at 2 Ω and 240 W x 1 in bridge mode at 4 Ω. Its 7.1 x 6 x 2.2 inch chassis packs substantial power with precise crossover control.
- Class: D — efficient switching topology that preserves power headroom in a small form factor.
- 2-channel power output (2 Ω): 120 W x 2 — strong performance with low impedance drivers, allowing higher dynamic range and better control of hard-to-drive speakers.
- 2-channel power output (4 Ω): 80 W x 2 — suitable for standard 4 Ω speakers with solid headroom and warmth.
- Bridge power (4 Ω): 240 W x 1 — mono mode for a single high-power woofer or sub, simplifying low-frequency tasks.
- Frequency response: 20–20000 Hz — covers the full audible range for typical car audio installations.
- Minimum load: 2 Ω per channel; 4 Ω in bridge — defines stable operation boundaries for individual channels and bridged configurations.
- Input sensitivity: 0.4–8 V — accommodates a wide range of head units and source levels for clean level matching.
- Low pass / High pass filters: 50–12000 Hz (LPF and HPF); LPF and HPF simultaneous operation — flexible crossovers to shape speaker bandwidth and reduce overlap between drivers.
- Crossover slope: 12 dB/Oct — moderate steepness to separate bands without excessive phase shift.
- Input terminal: 4 Ga; Output terminal: 10 Ga — supports high-current wiring for stable delivery to low impedance loads.
- Working voltage: 9–15 V — compatible with typical automotive electrical conditions and voltage fluctuations.
- Signal-to-noise ratio: ~90 dB — low noise floor for clearer signal at higher SPL levels.
- Size (WxLxH): 7.1 x 6 x 2.2 inch — compact footprint suitable for tight installation spaces.
In a two-channel setup or bridged mono application, MFA-2.80 provides solid, controllable power with flexible crossover options to tailor bass and mid/high bands, while maintaining efficiency and low noise in a compact chassis.
| Model | MFA-2.80 |
| Class | D |
| Number of the channels | 2 |
| Frequency response | 20-20000 Hz |
| 2 Ohm RMS Power (14.4 V) | 120 W x 2 |
| 4 Ohm RMS Power (14.4 V) | 80 W x 2 |
| 4 Ohm RMS Power (Bridge) | 240 W x 1 |
| Minimum permissible load on the channel | 2 Ohm |
| Minimum permissible load in a bridge connection | 4 Ohm |
| Input SPL | 0.4 - 8V |
| Low pass filter | 50-12000 Hz |
| High pass filter | 50-12000 Hz |
| LPF and HPF simultaneous operation | True |
| Crossover | 12 dB/Oct |
| Input terminal | 4 Ga |
| Output terminal | 10 Ga |
| Working voltage | 9 - 15V |
| Signal-to-noise ratio | ��� 90 dB |
| Size (WxLxH) | 7.1 x 6 x 2.2 inch |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product features
Use this section to highlight specific product features to your customers.
Product comparison grid
Add content here to explain a bit about the range of products on offer and which ones may be most suitable for your customers.


