Massive Audio BP1000.1v2 1,000 Watt Monoblock Amplifier
Key features
- Amplifier channels: 1
- RMS output at 4 ohms: 250.0 W
- RMS output at 2 ohms: 455 W
- Frequency response: 15 Hz–35 kHz
- Input level: 0.2–9 V
- Turn-on: DC-offset sensing with high-level inputs
Massive Audio BP1000.1v2 1,000 Watt Monoblock Amplifier is backordered and will ship as soon as it is back in stock.
Massive Audio BP1000.1v2 1,000 Watt Monoblock Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Get dedicated subwoofer power for a serious car audio build with the Massive Audio BP1000.1v2 monoblock amplifier. It delivers 455W RMS x 1 at 2 ohms, with a 1,000W x 1 peak rating at 14.4V.
A built-in OEM line converter and auto-sensing turn-on help simplify integration with a factory radio. The variable low-pass crossover and bass boost let you shape the signal for your system.
Key Features & Benefits
- 2-ohm mono operation: The 455W RMS x 1 rating provides substantial continuous power for a compatible subwoofer setup.
- OEM line converter: High-level input support helps connect the amplifier to a factory radio.
- Auto-sensing turn-on: DC-offset detection switches on the amplifier when it senses the head unit.
- Variable low-pass crossover: The 50Hz–750Hz range helps tailor the frequency band to your subwoofer setup.
- Five-way protection: Protection features address short circuits, thermal overload, and other common car-audio faults.
Technical Specifications
| Peak Output Power @ 14.4V | 1000W x 1 |
| 1 Ohm RMS | n/a |
| 2 Ohm RMS | 455W x 1 |
| 4 Ohm RMS | 250W x 1 |
| 4 Ohm Bridged | n/a |
| Input Level | 0.2~9.0v |
| Freq. Response | 15Hz~35KHz |
| THD at 4 Ohm Load 30% Rated Power | <0.1% |
| S/N Ratio | >90dB |
| Bass Boost | 0~6dB/12dB (45Hz) |
| Minimum Load | 2 Ohm Mono |
| Gain Remote | UR1 (Optional) |
| Dimension | 2"H x 7.1"W x 12.9"L |
- Low-pass crossover: 50Hz–750Hz, variable, or OFF.
- Signal and control features: Built-in OEM line converter, DC-offset auto-sensing turn-on, and 12V remote output.
- Bass boost: 0–6dB / 12dB at 45Hz.
- Construction and compliance: Mil Spec PCB with SMD; RoHS, E-Mark, CTA-2006, and CE.
Why Choose This Product?
The BP1000.1v2 is designed for a dedicated subwoofer channel, with 2-ohm and 4-ohm RMS ratings to help you compare its output with your planned load. Its signal-handling features can make a factory-radio installation more straightforward, while the optional UR1 remote provides a convenient way to adjust level from the listening position.
Installation & Compatibility Notes
Use a mono subwoofer load of at least 2 ohms; the specifications list 1-ohm RMS as n/a. Check the final load presented to the amplifier before installation. The 1,000W peak rating is specified at 14.4V, and the source notes that full output depends on the vehicle electrical system delivering full rail voltage.
Allow for the amplifier’s 2"H x 7.1"W x 12.9"L dimensions when planning a mounting location. The UR1 gain remote is optional.
Frequently Asked Questions
Can the BP1000.1v2 run a 1-ohm mono load?
No. Its minimum load is 2 ohms mono, and the 1-ohm RMS specification is listed as n/a.
What does the 1,000W rating mean?
It is the peak output rating at 14.4V. The listed continuous ratings are 455W x 1 at 2 ohms and 250W x 1 at 4 ohms.
Can I connect it to a factory radio?
It has a built-in OEM line converter and accepts an input level of 0.2~9.0v. It also uses DC-offset sensing for auto turn-on.
Is the UR1 gain remote included?
The UR1 gain remote is optional.
What mounting space should I allow?
The amplifier measures 2"H x 7.1"W x 12.9"L. Check the available space at your intended mounting location.
Explore More
Shop 12 Volt Outlet for car audio equipment. Want to learn more about Massive Audio? Explore our Massive Audio brand profile.
