Nemesis Audio NA-10F 10″ High Performance 1000W RMS Dual Voice Coil 4-Ohm Car Subwoofer
Key features
- Subwoofer size: 10.0 inches
- RMS power per subwoofer: 1000 W
- Voice-coil options: D2, D4
- Voice coil: 3-inch, 4-layer CCAW
- Basket material: Die-cast aluminum
- Cone material: Non-pressed paper
Nemesis Audio NA-10F 10″ High Performance 1000W RMS Dual Voice Coil 4-Ohm Car Subwoofer - Dual 2 Ohm is backordered and will ship as soon as it is back in stock.
Nemesis Audio NA-10F 10″ High Performance 1000W RMS Dual Voice Coil 4-Ohm Car Subwoofer - Dual 2 Ohm is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Build a bass-focused car audio system around the Nemesis Audio NA-10F, a 10-inch Fierce Series subwoofer rated for 1000 Watts RMS. Its dual voice coil, 3-inch four-layer CCAW voice coil, and 240 oz magnet are designed for demanding bass applications.
Key Features & Benefits
- 1000 Watts RMS: The stated power handling suits a performance-focused system with a capable amplifier.
- Dual voice coil: DVC wiring gives you options for matching the subwoofer load to your amplifier and system goals.
- Die-cast aluminum basket: The rigid basket helps maintain motor alignment and reduce distortion.
- Non-pressed paper cone: Its balanced mass supports the fast transient response described for this subwoofer.
- Foam surround and Nomex spider: These components support controlled excursion, while woven tinsel leads provide flexible connections.
- 240 oz magnet: The high-efficiency magnet provides motor force for bass control and consistency.
Technical Specifications
| Brand | Nemesis Audio |
|---|---|
| Model | NA-10F |
| Series | Fierce Series |
| Product type | Car subwoofer |
| Cone diameter | 10 inches |
| Power handling | 1000 Watts RMS |
| Voice coil | 3″ – 4 Layer CCAW |
| Voice coil configuration | Dual voice coil (DVC) |
| Impedance options | 4-ohm or 2-ohm |
| Basket material | Die-cast aluminum |
| Cone material | Non-Pressed Paper |
| Surround | Foam |
| Magnet | 240 oz high-efficiency magnet |
| Leads and spider | Tinsel woven leads on Nomex spider |
Why Choose This Product?
The NA-10F combines substantial stated RMS power handling with a DVC design, giving you wiring flexibility when planning an amplifier and subwoofer load. Its aluminum basket, large magnet, and excursion-supporting suspension are specified for demanding bass use.
The cone and surround also support a quick response to changing musical notes, making this subwoofer a considered choice when you want bass that feels controlled as well as powerful.
Installation & Compatibility Notes
Pair the NA-10F with a capable amplifier and a proper enclosure, as described for this subwoofer. Match the amplifier’s supported load to the subwoofer’s impedance and intended DVC wiring configuration.
The product title identifies a 4-ohm NA-10F, while the supplied specifications list 4-ohm and 2-ohm impedance options. Confirm the impedance of the specific unit before wiring it into your system.
Frequently Asked Questions
What is the power handling of the NA-10F?
It is rated at 1000 Watts RMS. This is the stated RMS power-handling figure, not a peak-power rating.
What does the dual voice coil design offer?
The DVC design allows wiring configurations to be selected for the amplifier load and system goals. The finished configuration must match the amplifier’s supported load.
Is this the 4-ohm or 2-ohm version?
The product title identifies this listing as the 4-ohm model. The supplied specifications also list a 2-ohm option, so confirm the specific unit’s impedance before installation.
What enclosure should I use?
The supplied details call for a proper enclosure but do not specify an enclosure type or volume. Choose an enclosure using requirements confirmed for the NA-10F.
Explore More
Shop Nemesis Audio products at 12 Volt Outlet, and learn more through our Nemesis Audio brand profile.
Recommended Monoblock Amplifiers
Power-matched options for one subwoofer or one complete loaded enclosure. We aim to include same-brand choices when their ratings qualify.
Loading amplifier suggestions…
Suggestions use 75–125% of the subwoofer’s RMS rating at the wiring load shown. Check wiring, enclosure needs, electrical capacity and installation space. Set gain and filters correctly to avoid overpowering the subwoofer. Buying more than one subwoofer changes the match.
