Power Acoustik BUC-1 Surface/Flush Mount Rearview Camera
Key features
- Image sensor: 1/4-inch CMOS
- Display/sensor resolution: 648x488
- Viewing angle (degrees): 170
- Minimum illumination (lux): 0.01
- Ingress rating: IP65
- Video output: RCA
Power Acoustik BUC-1 Surface/Flush Mount Rearview Camera is backordered and will ship as soon as it is back in stock.
Power Acoustik BUC-1 Surface/Flush Mount Rearview Camera is backordered and will ship as soon as it is back in stock.
Description
Description
Power Acoustik BUC-1 Surface/Flush Mount Rearview Camera
Add a rearward view without committing to a license-plate camera. The BUC-1 offers surface- and flush-mount hardware, letting an installer choose a suitable mounting location and connect the camera to a compatible RCA video input.
The BUC-1 is a focused camera upgrade for a receiver or monitor that already supports a rear-camera connection. Its surface- and flush-mount hardware gives the installation a defined starting point, while the supplied 20-foot cable helps plan the route from the rear of the vehicle to the display. A wide view is useful when checking the area behind the vehicle, but screen compatibility and careful camera placement matter more than simply fitting a camera to the bumper.
Key Features
- Surface- and flush-mount hardware for the intended mounting style.
- 170-degree viewing angle with a reversed image and color distance guides.
- RCA video output for connection to a compatible camera input.
- IP65-rated housing and a supplied 20-foot cable.
Specifications
| Image sensor | 1/4-inch CMOS |
|---|---|
| Display/sensor resolution | 648x488 |
| Viewing angle (degrees) | 170 |
| Minimum illumination (lux) | 0.01 |
| Ingress rating | IP65 |
| Video output | RCA |
| Included equipment | 20ft cable, surface/flush mount hardware and hole saw |
| Features | reversed image; color distance guide; reverse trigger |
Why Choose the BUC-1?
Choose this camera when you want a dedicated rearview feed rather than replacing an otherwise suitable display. The physical mount is the main distinction to consider: match it to your vehicle and the viewing angle you need.
Application & Installation
Requires a compatible display with an RCA camera input. Confirm mounting, wiring and reverse-trigger integration before installation. A backup camera supplements—not replaces—direct observation.
Frequently Asked Questions
Will this connect to any car radio?
No. The display must accept the camera’s RCA video signal and support the required camera/reverse-trigger wiring. Check the radio’s camera-input specifications before ordering.
Is a screen included?
This listing is for the camera and its stated mounting/cable equipment. Use it with a compatible separate monitor or receiver.
Which mounting hardware comes with this model?
The BUC-1 includes surface- and flush-mount hardware and a 20-foot cable.
Does it replace mirrors or looking behind the vehicle?
No. A camera is a supplemental view; continue using mirrors and direct observation. Guides on the screen do not measure every obstacle or guarantee clearance.
Explore More
Shop Backup Cameras or learn more about Power Acoustik at 12 Volt Outlet.
