Power Acoustik MOFO2-2KD Class D 2-Channel Car Amplifier
Power Acoustik MOFO2-2KD Class D 2-Channel Car Amplifier is backordered and will ship as soon as it is back in stock.
Power Acoustik MOFO2-2KD Class D 2-Channel Car Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
The Power Acoustik MOFO2-2KD gives your system a focused pair of speakers or a compatible bridged speaker load. Part of the MOFO family, it provides the channel layout and adjustable controls needed to build an aftermarket car audio system around your speakers and installation space.
For the MOFO2-2KD, channel layout and speaker impedance matter together: adding drivers changes the load seen by each channel. Plan the final wiring first, then compare the appropriate manufacturer RMS rating with the connected speakers’ requirements.
Key Features
- RCA inputs connect to a compatible aftermarket receiver or signal processor.
- Adjustable high-pass and low-pass filtering helps match the amplifier output to the connected drivers.
- Built-in protection monitors short-circuit, thermal and overload conditions.
- Tower-style construction includes a pedestal and a mounting bracket for flexible amplifier placement.
Technical Specifications
| Specification / detail | Manufacturer-listed information |
|---|---|
| Max Power (Watts) | 2,000 Watts |
| RMS Power @4ohm stereo (resolved from Features) | 200w x 2 |
| RMS Power @ 2Ω | 300w x 2 |
| RMS Power @ 4Ω Bridged | 600w x 1 |
| Dimensions (manufacturer stated) | 5.75″ Square x 7.50″ Height |
Why Choose the MOFO2-2KD?
The MOFO2-2KD suits a build that needs a two-channel amplifier for a left/right speaker pair. Its published operating points are RMS Power @4ohm stereo (resolved from Features): 200w x 2; RMS Power @ 2Ω: 300w x 2; RMS Power @ 4Ω Bridged: 600w x 1. Choose the rating corresponding to your actual wired load rather than treating the maximum figure as usable continuous output.
Installation & Compatibility Notes
Confirm the final load impedance, mounting clearance, ventilation, power cable and fuse requirements before installation. A suitable wiring kit and any vehicle-specific integration parts should be selected for your particular system.
Frequently Asked Questions
What RMS output does the MOFO2-2KD list?
RMS Power @4ohm stereo (resolved from Features): 200w x 2; RMS Power @ 2Ω: 300w x 2; RMS Power @ 4Ω Bridged: 600w x 1. These are manufacturer ratings, not independent bench-test results.
What system layout is the MOFO2-2KD intended for?
Its two channels can power a left/right speaker pair.
How much mounting space does the MOFO2-2KD require?
5.75″ Square x 7.50″ Height. Allow additional room for connectors, cable bends and airflow; chassis dimensions alone do not include that installation clearance.
How does the MOFO2-2KD connect to the audio source?
Use the documented RCA signal inputs with a compatible receiver or processor. If the factory system does not provide an appropriate signal, integration hardware may be needed; do not assume direct compatibility from the amplifier model alone.
How should I set up the MOFO2-2KD before listening?
Start with conservative gain and tone settings, check the wiring and load, then configure the documented crossover controls for the connected drivers. Bass boost is not extra clean power and should not be used to compensate for an incorrect enclosure or gain setting.
Explore More
Explore 2 Channel Car Amplifiers. Compare the Power Acoustik lineup, read our Power Acoustik brand guide, or call 281-562-9112 with your vehicle and system details.
