1998-2013 Harley-Davidson Road Glide, Street Glide & Electra Glide Amp Install Kit (Gen-3)
1998-2013 Harley-Davidson Road Glide, Street Glide & Electra Glide Amp Install Kit (Gen-3) is backordered and will ship as soon as it is back in stock.
1998-2013 Harley-Davidson Road Glide, Street Glide & Electra Glide Amp Install Kit (Gen-3) is backordered and will ship as soon as it is back in stock.
Description
Description
The next step in motorcycle performance, featuring simple plug-and-play installation creates the best in class on-bike audio experience.
Plug-and-Play Design: Designed to work right out of the box. Everything is included to make for easy installation and all to ensure less time in the garage and more time out riding.
Element Ready™: Purpose built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time.
Compatibility Chart: Please review below tab for fitment before purchasing.
UNRELENTING PERFORMANCE
This complete kit includes a heatsink, bracket, hardware and wiring harness needed to install the M5-800X4 amplifier on select 1998-2013 Harley-Davidson® motorcycles. The cables have been upgraded to provide the necessary current and voltage requirements for the amplifier, and the heat-sink provides extended thermal time under demanding situations. Integrates into factory electrical system without modifications or cutting.
Refer to our COMPATIBILITY chart to verify fitment before purchasing.
Harley-Davidson® , Road Glide®, Street Glide®, and Electra Glide® are registered trademarks of Harley-Davidson Motor Company. CVO™ is a trademark of Harley-Davidson Motor Company. Harom Kardon is a registered trademark of Harman/Kardon International Industries, Inc.
FEATURES AT A GLANCE
- Full Spec Cable meets or exceeds AWG (American Wire Gauge) requirements
- Plug-and-Play design for easy installation
- Cables use 100% pure crystal-oxygen free copper (PC-OFC)
- Compatible with TM400X4ad amplifier (sold separately)
- Designed for use with 1998-2013 Harley-Davidson® Motorcycles
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- Includes rear speaker output harness for connection of rear speakers
- Y-adaptors supports expansion of speakers in lower fairing, saddlebag, or Tour-Pak®
- Designed for use with M5-800X4 amplifier (sold separately)
Specifications
| Battery PWR/GND Gauge |
8 AWG
|
|---|---|
| Amplifier PWR/GND Gauge |
8 AWG
|
| Speaker Wire Gauge |
16 AWG
|
| Fuse Size |
60 Amp
|
| Fuse Type |
MAXI
|
| Dual Amp Installation Kit |
No
|
Compatibility
Compatible Harley-Davidson® Motorcycles
| YEAR | MAKE | MODEL | FAIRING |
|---|---|---|---|
| 2006-2013 | Harley Davidson® | Street Glide® Ultra | Bat Wing |
| 2006-2013 | Harley Davidson® | Street Glide® | Bat Wing |
| 1998-2013 | Harley Davidson® | Electra Glide® | Bat Wing |
| 1998-2013 | Harley Davidson® | Road Glide® | Shark Nose |
| 1998-2013 | Harley Davidson® | Road Glide® Ultra | Shark Nose |
This amplifier installation kit is designed to interface only with the below aftermarket amplifier and Harley-Davidson® motorcycle. If your existing amplifier and motorcycle are not listed below, it is not compatible.
Kit requires factory Harley-Davidson® radio to be flashed.
Required Amplifier
|
|
|
|---|---|
| Element Ready™ IPX6 800 Watt 4-Channel Amplifier | |
| Power Marine 400 Watt Class-ad 4-Channel Amplifier |
