American Bass Godfather 2000.1D 2,000 Watt Monoblock Amplifier

Product Overview

Build a dedicated subwoofer system around the American Bass Godfather 2000.1D monoblock amplifier. This digital mono car audio amplifier delivers 1,060W RMS at 4 ohms, 1,560W RMS at 2 ohms, and 2,340W RMS at 1 ohm.

Its adjustable subsonic and low-pass filters help you shape the bass signal for your setup, while its 10.24" x 7.15" footprint suits installations where space matters.

Key Features & Benefits

• Single-channel design: A dedicated mono channel is built for subwoofer amplification.
• Three impedance ratings: Compare RMS output at 4, 2, and 1 ohm when matching the amp to your subwoofer load.
• Adjustable filters: Set the subsonic filter from 10Hz to 50Hz and the low-pass filter from 35Hz to 250Hz.
• 45Hz bass boost: Adjustable from 0dB to 9dB for tuning emphasis around 45Hz.
• Compact dimensions: The 10.24" L x 7.15" W x 2.33" H chassis gives you specific measurements for planning an install location.

Technical Specifications

Why Choose This Product?

The Godfather 2000.1D combines three stated RMS power ratings with controls for shaping the subwoofer signal. That gives you options to match the amplifier’s output rating to your system’s impedance and adjust its filter settings during tuning.

Its 85dB signal-to-noise ratio and THD rating below 0.1% at 4 ohms are useful specifications to consider when comparing amplifiers for a bass-focused car audio system.

Installation & Compatibility Notes

Confirm that your subwoofer system’s impedance matches an appropriate amplifier rating before wiring. Plan for the stated 200A fuse rating and appropriate protection wiring. Check the mounting area against the amplifier’s length, width, and height before installation.

Frequently Asked Questions

What is the RMS power at each impedance?

The Godfather 2000.1D is rated at 1,060W RMS at 4 ohms, 1,560W RMS at 2 ohms, and 2,340W RMS at 1 ohm.

What do the subsonic and low-pass filters adjust?

The subsonic filter range is 10Hz to 50Hz, and the low-pass filter range is 35Hz to 250Hz. These controls let you adjust the amplifier’s filtering for your subwoofer setup.

How much space should I allow for the amplifier?

Its dimensions are 10.24" long, 7.15" wide, and 2.33" high. Check the available mounting space against all three measurements.

What fuse rating is listed?

The listed fuse rating is 200A. Use appropriate protection wiring for the installation.

Is this a multi-channel amplifier?

No. It is a digital mono amplifier with one channel, designed for subwoofer use.

Explore More

Shop American Bass products at 12 Volt Outlet. Want to learn more about American Bass? Explore our American Bass brand profile.