DS18 NXL-X10TPNEO 10-inch Neodymium Marine Tower Speaker Pair with RGB LEDs
Key features
- Sold as a pair of 10-inch tower speakers
- Rated power handling: 300W RMS / 900W maximum
- 4-ohm impedance; sensitivity: 98dB at 1W/1m
- Frequency response: 45Hz–22kHz; recommended high-pass crossover: 55Hz
- 2-inch woofer voice coil and neodymium magnet
- Water-resistant compressed-paper cone
DS18 NXL-X10TPNEO 10-inch Neodymium Marine Tower Speaker Pair with RGB LEDs - Black is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Add powerful, full-range sound and RGB lighting to your marine tower setup with the DS18 NXL-X10TPNEO 10-inch neodymium marine tower speaker pair. Each speaker combines a neodymium motor, a 6.1-inch passive radiator, and lighting across the speaker, acrylic-ring, and passive-radiator areas.
Key Features & Benefits
- 300W RMS power handling: The pair is rated for 300W RMS and 900W maximum power handling.
- Neodymium motor: A neodymium magnet powers each speaker’s 2-inch woofer voice coil.
- Passive radiator: The 6.1-inch radiator adds a distinct component to the speaker design and includes RGB LEDs.
- Adjustable clamps: Die-cast clamps rotate 360 degrees and fit tubing from 1 to 2.5 inches.
- Marine-focused construction: IP65-rated, UV-stable housings pair with water-resistant compressed-paper cones and 316 stainless-steel mesh grilles.
- Flexible wire mounting: Choose concealed or exposed wire mounting to suit your installation approach.
Technical Specifications
| Product | Pair of 10-inch marine tower speakers |
|---|---|
| Power handling | 300W RMS / 900W maximum |
| Impedance | 4 ohms |
| Sensitivity | 98dB at 1W/1m |
| Frequency response | 45Hz–22kHz |
| Recommended high-pass crossover | 55Hz |
| Woofer voice coil | 2 inches |
| Magnet | Neodymium |
| Cone | Water-resistant compressed paper |
| Passive radiator | 6.1 inches, with RGB LEDs |
| RGB lighting | Runs through the speaker, acrylic-ring, and passive-radiator areas |
| Housing | IP65-rated, UV-stable PC/ABS; housings use ABS |
| Grilles | 316 stainless-steel mesh |
| Clamps | 360-degree die-cast; fits 1–2.5-inch tubing |
| Wire mounting | Concealed or exposed |
| Included | Pads and stainless hardware |
| Available models | Black: NXL-X10TPNEO/BK; White: NXL-X10TPNEO/WH; Red: NXL-X10TPNEO/RD; Carbon Fiber: CF-X10TPNEO |
Why Choose This Product?
The NXL-X10TPNEO pairs 10-inch tower speakers with neodymium motors, RGB lighting, and a 6.1-inch passive radiator. Its adjustable clamps accommodate tubing across a 1-to-2.5-inch range, while the choice of concealed or exposed wire mounting offers installation flexibility.
The 45Hz–22kHz frequency response and 98dB sensitivity provide useful figures for comparing this pair with your audio system and planning the signal chain.
Installation & Compatibility Notes
Check your tower tubing diameter before choosing these speakers; the clamps fit tubing from 1 to 2.5 inches. Plan for the stated 4-ohm impedance and 55Hz recommended high-pass crossover when matching and setting up your audio system.
Pads and stainless hardware are included. Choose concealed or exposed wire mounting based on your installation layout.
Frequently Asked Questions
What is the power rating?
The pair is rated at 300W RMS and 900W maximum.
What tubing diameter do the clamps fit?
The 360-degree die-cast clamps fit tubing from 1 to 2.5 inches.
Where are the RGB LEDs located?
RGB lighting runs through the speaker, acrylic-ring, and passive-radiator areas. The 6.1-inch passive radiator also has RGB LEDs.
What mounting and hardware are included?
The speakers support concealed or exposed wire mounting. Pads and stainless hardware are included.
Explore More
Shop the DS18 NXL-X10TPNEO pair at 12 Volt Outlet. Want to learn more about DS18? Explore our DS18 brand profile.
