Deaf Bonce MACHETE MLA-150.2 XS | 150 Watt 2-channel amplifier

The Deaf Bonce MACHETE MLA-150.2 XS is a compact 2-channel Class D amplifier built for high-impedance, high-current car audio installs, delivering 225 W x 2 at 2 Ω or 150 W x 2 at 4 Ω with bridge-ready capability for sub duties.

• Model: MLA-150.2 XS — Two-channel MLA-150.2 XS with bridge-ready performance for versatile system design.
• Class: D — Efficient switching design that minimizes heat for a small-form-factor amp in mobile environments.
• Number of the channels: 2 — Delivers stereo front-stage power or can be bridged for a mono sub channel.
• Frequency response: 20-20000 Hz — Reproduces the full audible spectrum for accurate front-end and sub integration.
• 2 Ohm RMS Power (14.4 V): 225 W x 2 — Higher power availability when driving low-impedance front speakers for greater dynamic range.
• 4 Ohm RMS Power (14.4 V): 150 W x 2 — Lower impedance load capability with solid power reserves for typical 4 Ω speakers.
• 4 Ohm RMS Power (Bridge): 450 W x 1 — Bridged mode to drive a sub with a single mono channel at 4 Ω.
• Minimum permissible load on the channel: 2 Ohm — Ensures stable operation when using low-impedance front speakers.
• Minimum permissible load in a bridge connection: 4 Ohm — Safe, reliable bridge operation into a 4 Ω sub load.
• Low pass filter: 40-400 Hz — Sets the subwoofer’s upper boundary to prevent midrange drivers from playing bass frequencies.
• High pass filter: 40-400 Hz — Protects and shapes the front-stage speakers by rolling off low frequencies.
• LPF and HPF simultaneous operation: True — Allows independentizing front-stage and sub as needed without compromising one another.
• Crossover: 12 dB/Oct — Steepness of the filter slope for clean separation between drivers and sub.
• Input terminal: 4 Ga — High-current input capability for robust signal and minimal voltage drop.
• Output terminal: 8 Ga — Heavy-gauge output for efficient power delivery to speakers/subs.
• Working voltage: 9 - 15V — Targets typical automotive electrical systems with headroom for peak demands.
• Signal-to-noise ratio: ��� 85 dB — Reflects low noise floor in typical car audio environments.
• Size (WxLxH): 6 x 3.3 x 1.4 inch — Very compact footprint suitable for tight installations.

Benefits: In a two-channel front-stage setup, MLA-150.2 XS provides substantial low-impedance power for clean, dynamic imaging. Bridging enables a single sub to receive up to 450 W at 4 Ω, simplifying power delivery for a dedicated sub without needing a separate mono amp. The integrated LPF/HPF options and 12 dB/oct crossover give precise speaker/sub separation, while the 4 GA input and 8 GA output support real-world high-current connections. Its compact size fits under seats or tight enclosures, and the 9–15 V range aligns with typical car electrical systems for reliable performance.