SoundQubed BG4-1400 1400 Watt Bagger Series Amp (Ultra Compact)

SoundQubed BG4-1400 — 4-Channel Bagger Amplifier | BG-Series | 200W x 4 @ 4Ω

The SoundQubed BG4-1400 is the flagship 4-channel model of the 2024 BG-Series — SoundQubed’s purpose-built line of ultra-compact amplifiers designed specifically for motorcycles, baggers, side-by-sides, boats, golf carts, and any application where space is the primary constraint. At just 9.92" x 3.8" x 1.7", the BG4-1400 is the largest chassis in the BG-Series — and it earns that distinction by delivering 200W x 4 at 4Ω, 350W x 4 at 2Ω, and 675W x 2 bridged at 4Ω. That’s serious power for a chassis smaller than most wallets. After 12 months of development and testing, SoundQubed engineered the BG-Series to change the direction of the bagger audio industry — and the BG4-1400 is the top of that lineup.

The BG4-1400 features a selectable LPF/HPF/FULL crossover with a filter range of 35 Hz–250 Hz and a 10x crossover frequency multiplier for precise frequency control without a separate DSP. It accepts both low-level RCA input (400mV–6V) and automatic high-level input (RCA Auto) — making it plug-and-play compatible with factory head units and OEM audio systems. With a signal-to-noise ratio of 95 dB, 81% efficiency at 4 ohm, and PCB anti-corrosion protection coating for durability in outdoor and marine environments, the BG4-1400 is built to perform hard in the real world. The sleek black case features a custom “Q” logo end plate, machined logos, and lasered end caps with input/output identification.

Powered by a 4GA input with a 3 x 40A fuse configuration, the BG4-1400 is protected by a full suite of thermal, overload, DC output, short circuit, and voltage input protection circuits. 4-channel 10-gauge speaker outputs and bridge-capable configuration give you maximum flexibility for any bagger or powersports audio build.

Why Choose the SoundQubed BG4-1400?

• 200W x 4 @ 4Ω / 350W x 4 @ 2Ω / 675W x 2 Bridged @ 4Ω — The most powerful 4-channel in the BG-Series — serious output in a chassis that fits virtually anywhere.
• Ultra-Compact 9.92" x 3.8" x 1.7" Chassis — The largest BG-Series amp is still smaller than most conventional amplifiers — purpose-built for bagger fairings and tight installs.
• Automatic High-Level Input (RCA Auto) — Plug-and-play compatible with factory Harley-Davidson and OEM audio systems — no aftermarket head unit required.
• Selectable LPF/HPF/FULL + 10x X-Over Multiplier — Precise crossover control from 35 Hz to 250 Hz (x10 = up to 2,500 Hz) without a separate DSP.
• 95 dB Signal-to-Noise Ratio — Clean, accurate signal reproduction even in electrically noisy motorcycle environments.
• Anti-Corrosion PCB Coating — Built for outdoor, marine, and motorcycle environments where moisture and vibration are a constant reality.
• Custom “Q” Logo End Plate + Lasered End Caps — Premium aesthetics with input/output identification — looks as good as it performs.
• Audio Precision Quality Control Verification — Every BG4-1400 is verified with Audio Precision instruments before leaving the factory.

Installation Recommendations

Motorcycle / Bagger Install: The BG4-1400 is purpose-built for Harley-Davidson baggers and touring bikes. Its 9.92" x 3.8" x 1.7" footprint fits in most fairing pockets, saddlebag lids, tour-pak lids, and under-seat locations. Use the automatic high-level input to connect directly to your factory radio without an aftermarket head unit. Run channels 1/2 for front fairing speakers (HPF filtered at 80–100 Hz) and channels 3/4 for rear speakers, or bridge channels 3/4 for a compact subwoofer at 675W.

Marine / Side-by-Side / Golf Cart: The anti-corrosion PCB coating makes the BG4-1400 an excellent choice for marine and outdoor installs. The compact chassis fits in virtually any storage compartment or under-dash location. Use the automatic high-level input for OEM head unit compatibility and the LPF/HPF crossover to tune your system without additional signal processors.

Electrical Requirements: The BG4-1400 uses a 4GA power input with a 3 x 40A fuse. It is compatible with 12V electrical systems standard on motorcycles, boats, and powersports vehicles.

Full Specifications

Frequently Asked Questions

Q: Will the BG4-1400 work with my factory Harley-Davidson radio?
A: Yes — the BG4-1400 features automatic high-level input (RCA Auto) that connects directly to your factory radio’s speaker outputs without an aftermarket head unit. It automatically detects the signal and converts it for amplifier use.

Q: What’s the difference between the BG4-700 and BG4-1400?
A: The BG4-1400 delivers twice the power (200W vs. 100W x4 @ 4Ω) and is 1.62" longer (9.92" vs. 8.3"). Both share the same BG-Series platform, auto hi-level input, and X10 crossover multiplier. Choose the BG4-700 for tighter spaces; choose the BG4-1400 when you need maximum output from the BG-Series 4-channel lineup.

Q: Where does the BG4-1400 fit on a Harley-Davidson bagger?
A: At 9.92" x 3.8" x 1.7", the BG4-1400 fits in most fairing pockets, saddlebag lids, tour-pak lids, and under-seat locations on Harley-Davidson touring and bagger models. Always measure your available space before purchasing.

Q: Is the BG4-1400 weatherproof?
A: The BG4-1400 features an anti-corrosion PCB coating for durability in outdoor, marine, and motorcycle environments. It is not fully waterproof — protect it from direct water exposure and install in a location with reasonable weather protection.