Audiopipe APTV-1100.6 6 Channel Full Range Class D Amplifier
Key features
- Amplifier channels: 6
- RMS per channel at 4 ohms: 100 W
- RMS per channel at 2 ohms: 160 W
- Six-channel output: Choose from the listed RMS power ratings to match your system configuration.
- High- and low-pass crossovers: The 40Hz–400Hz range supports flexible frequency setup.
- Wide input sensitivity: The 0.25V–10V range accommodates a range of audio signal input levels.
Audiopipe APTV-1100.6 6 Channel Full Range Class D Amplifier is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Build a six-channel car audio system around the Audiopipe APTV-1100.6 full range Class D amplifier. Its power ratings cover multiple impedance configurations, while adjustable high-pass and low-pass crossovers give you options for system setup.
The amplifier has a 10V–16V working voltage range and an IP67 waterproof level. Check your system’s speaker loads and electrical requirements against the specifications before choosing an installation configuration.
Key Features & Benefits
- Six-channel output: Choose from the listed RMS power ratings to match your system configuration.
- High- and low-pass crossovers: The 40Hz–400Hz range supports flexible frequency setup.
- Wide input sensitivity: The 0.25V–10V range accommodates a range of audio signal input levels.
- 10V–16V working voltage: Check this range against your vehicle’s electrical system requirements.
- IP67 waterproof level: This rating is specified for installations where added protection is a consideration.
Technical Specifications
| Specification | Details |
|---|---|
| Model | APTV-1100.6 |
| Amplifier type | Full Range Class D |
| Channels | 6 |
| Power output | 6 x 100 Watts RMS @ 4 Ohms |
| Power output | 6 x 160 Watts RMS @ 2 Ohms |
| Power output | 3 x 320 Watts RMS @ 2 Ohms |
| High-pass and low-pass crossover range | 40Hz–400Hz |
| Crossover slope | 12dB/OCT |
| Input sensitivity | 0.25V–10V |
| Working voltage | 10V–16V |
| Signal-to-noise ratio | Greater than 85dB |
| Frequency response (-3dB) | 12Hz–40kHz |
| Waterproof level | IP67 |
Why Choose This Product?
The APTV-1100.6 combines six-channel amplification with specified output ratings at different loads. That gives you concrete ratings to compare with your planned system, rather than relying on a single power figure. Its adjustable crossover range and slope add further setup options for shaping the system’s frequency configuration.
Installation & Compatibility Notes
Confirm that your planned speaker loads match the listed impedance ratings and that your electrical system falls within the 10V–16V working range. Review the crossover range and input sensitivity alongside your other audio equipment when planning connections and settings.
Frequently Asked Questions
What power does the APTV-1100.6 provide?
Its listed ratings are 6 x 100 Watts RMS @ 4 Ohms, 6 x 160 Watts RMS @ 2 Ohms, or 3 x 320 Watts RMS @ 2 Ohms.
What crossover adjustment range does it have?
The high-pass and low-pass crossover range is 40Hz–400Hz, with a 12dB/OCT slope.
What input sensitivity and working voltage does it support?
Input sensitivity is 0.25V–10V, and the working voltage range is 10V–16V.
What frequency response and signal-to-noise ratio are listed?
The frequency response is 12Hz–40kHz (-3dB), and the signal-to-noise ratio is greater than 85dB.
What waterproof level is specified?
The product description specifies an IP67 waterproof level.
Explore More
Shop Audiopipe products at 12 Volt Outlet. Want to learn more about Audiopipe? Explore our Audiopipe brand profile.
