Pride Ruby Voice 6.5 v2 Midrange Speakers, 150W RMS (Pair)

Product Overview

Build a multi-way car audio system around the Pride Ruby Voice 6.5 v2, a dedicated 6.5-inch midrange speaker pair rated at 150W RMS. Its electrical-steel magnetic core and 4-ohm nominal impedance are key details to consider when planning your system.

Key Features & Benefits

• 150W RMS rating: Use the RMS figure when selecting amplifier settings, rather than treating the 300W peak rating as the operating target.
• 4-ohm nominal impedance: Check this load against your amplifier’s supported speaker impedance.
• 6.5-inch nominal size: The listed 165 mm size helps you assess the speaker for your installation.
• Electrical-steel magnetic core: This material is specified for the speaker’s magnetic core.
• Pair supplied: The box contains one pair of Ruby Voice 6.5 v2 speakers.

Technical Specifications

Why Choose This Product?

The Ruby Voice 6.5 v2 is designed as a midrange driver for a multi-way car audio system. Its listed power rating, impedance, and mounting measurements give you concrete details to consider when matching it to your system and installation.

The pressed-paper cone, paper dust cap, and Nomex Cloth surround are specified alongside the steel basket and electrical-steel magnetic core. These construction details help you assess the speaker’s design as you plan your component choices.

Installation & Compatibility Notes

Check the 150 mm mounting opening, 173.5 mm outer diameter, and 64 mm mounting depth against your available space. Also account for the 163 mm mounting-hole spacing and 4.2 mm screw-hole diameter.

Use appropriate high-pass filtering and set amplifier gain for the 150W RMS rating, not the 300W peak figure. Pride’s high-pass guidance is 100–160 Hz depending on power; consult the manufacturer’s current installation guidance for crossover and response-range planning.

Frequently Asked Questions

Is this a full-range speaker?

The Ruby Voice 6.5 v2 is identified as a dedicated midrange driver for a multi-way car audio system.

Should I use the RMS or peak rating when setting amplifier gain?

Use the 150W RMS rating when setting amplifier gain. The listed peak rating is 300W.

What high-pass setting does Pride recommend?

The manufacturer’s listed guidance is 100–160 Hz, depending on power. Check current manufacturer guidance when designing your crossover.

What mounting space should I allow?

Check the 150 mm mounting opening and 64 mm mounting depth, along with the outer diameter and mounting-hole measurements listed above.

How many speakers are included?

The box contains one pair of Pride Ruby Voice 6.5 v2 speakers.

Explore More

Shop with 12 Volt Outlet, and explore the Pride brand profile to learn more about the brand.

Manufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov