Pride Solo 300 6.5 Competition Speakers, 300W RMS (Pair)

Product Overview

Build a custom car-audio system around the Pride Solo 300 6.5 Competition, a 6.5-inch midrange speaker rated for 300 W RMS. Its replaceable moving-assembly module and aluminum basket with eight mounting points suit custom installation planning.

Key Features & Benefits

• Replaceable moving assembly: The cone, coil, dust cap, leads, and terminals are grouped into a module for replacement.
• Kapton voice-coil former: The 1.75-inch voice coil uses a Kapton former.
• Aluminum basket: Eight mounting points provide options for securing the speaker in a custom installation.
• Pair included: The box contains two Pride Solo 300 6.5 Competition speakers.

Technical Specifications

Manufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Why Choose This Product?

The modular moving assembly is a defining design feature: the cone, coil, dust cap, leads, and terminals are grouped together as a replaceable unit. This can be useful when planning maintenance for a custom system; confirm the exact compatible replacement module before servicing the driver.

The 4-ohm impedance and stated power ratings give you key figures to consider when matching the speakers to your system. The manufacturer’s high-pass guidance varies with applied power, so crossover selection is part of system planning.

Installation & Compatibility Notes

This model is intended for custom installations, not as an assumed direct factory replacement. Check mounting support, enclosure requirements, and clearance before installation. Confirm the current depth and flange dimensions before preparing the mounting surface.

Set high-pass filtering according to applied power and the manufacturer’s guidance. Professional installation is recommended. For service, follow the manufacturer’s procedure and use the required tools.

Frequently Asked Questions

What is the RMS power rating?

Each speaker is rated at 300 W RMS, with maximum power handling listed as 600 W.

What impedance should I account for?

The nominal impedance is 4 Ω. Consider this rating when matching the speakers to the rest of your system.

Will these speakers fit a factory opening?

They are intended for custom installations rather than an assumed direct factory replacement. Compare the 152 mm mounting opening, 173.5 mm outer diameter, and 166 mm mounting-hole spacing with your planned mounting location.

What high-pass setting should I use?

Pride’s guidance is 100–160 Hz, depending on applied power. Set the crossover according to the power used and the manufacturer’s guidance.

Explore More

Shop Pride audio products at 12 Volt Outlet. Want to learn more about Pride? Explore our Pride brand profile.