Pride Solo 300 8 Competition Speakers, 300W RMS (Pair)

Product Overview

Bring focused midrange output to a custom car audio system with the Pride Solo 300 8 Competition speaker. This 8-inch model is rated at 300 W RMS per speaker and supplied as a pair, with a 4 Ω impedance and modular construction.

Its hybrid magnetic assembly uses an electrical-steel core. Plan the mounting and crossover for this exact Competition model rather than using dimensions from earlier Solo 300 versions.

Key Features & Benefits

• 300 W RMS rating: Match your system settings to the speaker’s stated continuous power rating.
• 4 Ω impedance: Use this rating when checking amplifier compatibility.
• Modular construction: The serviceable driver format supports custom system planning and repair.
• Hybrid magnetic assembly: The magnetic system combines a hybrid design with an electrical-steel core.
• Pair supplied: The box contains two Pride Solo 300 8 Competition speakers.

Technical Specifications

Manufacturer warning: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Why Choose This Product?

The Solo 300 8 Competition combines a defined 300 W RMS rating with a modular driver format for custom car audio builds. Its 4 Ω impedance and published sensitivity give you specific figures to consider when planning system components.

Pressed Paper cone and dust-cap materials, a Nomex Cloth surround, and a Kapton voice-coil former identify the materials used in this model. The supplied pair is ready to plan as a two-speaker installation.

Installation & Compatibility Notes

Allow for the 189 mm mounting opening and 211 mm outer diameter when laying out the panel. Also confirm rear clearance and adequate support at the installation location.

The manufacturer recommends a 140 Hz high-pass crossover, depending on applied power. Set gain with the 300 W RMS rating in mind, and confirm compatible service modules before repair. Metal mesh and ABS rings are not included.

Frequently Asked Questions

What is the power rating for each speaker?

Each speaker has a 300 W RMS rating and 600 W maximum power handling. The manufacturer’s high-pass guidance is 140 Hz, depending on power.

What amplifier impedance should I check?

The listed impedance is 4 Ω. Check that your amplifier supports the load in your planned system configuration.

What mounting dimensions should I use?

Plan for a 189 mm mounting opening, 211 mm outer diameter, 15.5 mm flange height and 202 mm mounting-hole spacing.

What comes in the box?

The package includes one pair of speakers, a carton and a Pride sticker. Metal mesh and ABS rings are not included.

What should I confirm before servicing a speaker?

Check that the service module is compatible with the exact Solo 300 8 Competition model before beginning a repair.

Explore More

Want to learn more about Pride? Explore our Pride brand profile (opens in a new tab).