Audiopipe APSB-12212PX Double 12” High-Performance Compact Sealed Enclosure
Key features
Drivers and amplifier included
- Compatible woofer size: 12 inches
- Included subwoofers: 2 × 12-inch subwoofers in a loaded enclosure
- Enclosure design: Sealed
- Included amplifier: Separate APMCRO-1800 Micro Class D MOSFET amplifier
- Installation kit: BMS-1500SX amplifier wiring kit included
- Subwoofer construction: PP cones, rubber surrounds and rigid steel baskets
Audiopipe APSB-12212PX Double 12” High-Performance Compact Sealed Enclosure is backordered and will ship as soon as it is back in stock.
Description
Description
Product Overview
Add deep, controlled bass to your car audio system with the Audiopipe APSB-12212PX double 12-inch sealed subwoofer enclosure package. It combines two TX-PX-1250 subwoofers, an APMCRO-1800 Micro Class D MOSFET amplifier, and a BMS-1500SX installation kit.
The compact sealed enclosure is designed for tight, accurate bass and detailed sound reproduction. With the amplifier and installation kit included, the package brings the key components for a bass system together.
Key Features & Benefits
- Sealed enclosure: The compact design supports tight, accurate bass where installation space is limited.
- Dual 12-inch subwoofers: The package is built for impactful bass with a stated frequency response of 30–1,400 Hz.
- Adjustable bass: The amplifier’s remote subwoofer volume control lets you adjust bass from its remote control.
- Protected amplifier: Electronic protection circuitry helps guard against short circuits, DC offset, and thermal overload.
Technical Specifications
| Package | Audiopipe APSB-12212PX Super Bass Combo Package; loaded double 12-inch subwoofer enclosure, Micro Class D MOSFET amplifier, and amplifier installation kit |
|---|---|
| Enclosure | Compact sealed enclosure; designed for tight, accurate bass response and detailed sound reproduction |
| Subwoofer model | TX-PX-1250; double 12-inch subwoofer |
| Subwoofer power rating | 1600 watts P.M.P.O.; 800 watts R.M.S. |
| Subwoofer frequency response | 30–1,400 Hz |
| Subwoofer construction | 44 oz magnet; 2-inch 4-layer Kapton voice coil; rigid steel basket; PP cone with rubber surround |
| Amplifier model | APMCRO-1800; Micro Class D MOSFET amplifier |
| Amplifier power ratings | 289W RMS @ 4 Ohm; 496W RMS @ 2 Ohm; 800W RMS @ 1 Ohm |
| Amplifier features | Built-in low pass crossover; RCA line input jacks; electronic protection circuitry for short circuits, DC offset, and thermal overload; remote subwoofer volume control |
| Amplifier dimensions | 9.3” x 5.2” x 1.9” |
| Installation kit model | BMS-1500SX |
| Installation kit contents | 17 Ft. 2 RCA Plugs to 2 RCA Plugs with Signal Wire; 17 feet of 8 AWG red primary wire; 3 feet of 8 AWG black primary wire; 25 feet of 18 AWG speaker wire; 60 Amp AGU Fuse; 8 AWG fuse holder; four spade terminals (gold ring and plated in red and black) |
Why Choose This Product?
The APSB-12212PX pairs its loaded enclosure with a dedicated amplifier, so you can select amplification based on the listed power ratings and impedance. The built-in low pass crossover supports bass-focused operation, while RCA line inputs connect with a range of audio systems.
The subwoofers use a rigid steel basket, PP cone, rubber surround, and Kapton voice coil. These construction details are intended to support durability and help minimize distortion.
Installation & Compatibility Notes
The package includes an amplifier installation kit with power wire, speaker wire, RCA signal cable, a fuse and holder, and spade terminals. Check the available space for the enclosure and amplifier before installation, and confirm your audio system’s connection requirements.
Use the amplifier’s listed RMS rating for the applicable impedance when planning the system. The amplifier measures 9.3” x 5.2” x 1.9”; no enclosure dimensions are listed here.
Frequently Asked Questions
What does the amplifier’s 800W RMS rating refer to?
The amplifier is rated at 800W RMS @ 1 Ohm. Its other stated ratings are 496W RMS @ 2 Ohm and 289W RMS @ 4 Ohm.
What type of bass response is the enclosure designed to provide?
The compact sealed enclosure is designed for tight, accurate bass and detailed sound reproduction.
Does the package include an amplifier and installation kit?
Yes. It includes the APMCRO-1800 amplifier and the BMS-1500SX amplifier installation kit, as well as the loaded enclosure.
How can I check whether the enclosure will fit?
Measure the installation space and compare it with the enclosure’s dimensions before planning the installation.
Can the amplifier connect with different audio systems?
It has RCA line input jacks, which the product details describe as compatible with a wide range of audio systems. Confirm that your system has a suitable connection.
Explore More
Shop the Audiopipe APSB-12212PX at 12 Volt Outlet, and explore our Audiopipe brand profile to learn more about the brand.
