JBL Club 64C Car Component Speaker System

Product Overview

Bring clearer vocals and fuller musical detail to your drive with the JBL Club 64C car component speaker system. Its 6.5-inch woofer uses JBL Plus One™ cone architecture, while the edge-driven tweeter offers an adjustable output level for tuning treble to your cabin.

Key Features & Benefits

• Plus One™ woofer cone: Its expanded effective cone area is designed to deliver deeper bass and more musical body.
• UV-resistant polypropylene: The woofer cone is designed for the heat and humidity cycles of an in-car environment.
• 92dB sensitivity: The speaker is designed to provide strong output from a head unit or amplifier.
• Adjustable tweeter level: Choose 0dB or +3dB to tailor high-frequency balance to your vehicle’s acoustics.
• Included passive crossover: The network manages the frequency split between woofer and tweeter without requiring a separate crossover.

Technical Specifications

Why Choose This Product?

The Club 64C brings separate woofer and tweeter drivers together in a component system, giving you a way to upgrade door audio while adjusting the tweeter level to suit your cabin. Its 3.0-ohm nominal impedance and 92dB sensitivity make amplifier selection an important part of planning your system.

For a comparison, the Club 64CSQ has a carbon fiber cone, a Y40 ferrite magnet, 93dB sensitivity, and 95W RMS power handling. The Club 64C uses a polypropylene Plus One™ cone and is rated at 70W RMS.

Installation & Compatibility Notes

The included Starfish™ adapters are designed for a range of OEM door locations, and the I-Mount™ hardware supports tweeter mounting. Vehicle fit varies, so check the fitment guide for your make and model before ordering. The source recommends mounting the woofer in the factory door location and positioning the tweeter in the A-pillar or sail panel.

A 4-channel amplifier rated at 50–100W RMS per channel is recommended. Choose an amplifier stable at 2–4 ohms to accommodate the speaker’s 3.0-ohm impedance. For speaker-wire runs over 6 feet, use 16-gauge or heavier wire.

Frequently Asked Questions

What amplifier should I use with the JBL Club 64C?

A 4-channel amplifier rated at 50–100W RMS per channel is recommended. Choose one stable at 2–4 ohms. The 92dB sensitivity also supports use with a factory head unit.

Does the Club 64C include a crossover?

Yes. A passive crossover network is included to manage the frequency split between the woofer and tweeter.

Can I adjust the tweeter output?

Yes. The tweeter level can be switched between 0dB and +3dB.

Will it fit my vehicle’s factory door locations?

The included Starfish™ adapters are designed for a range of OEM door locations. Check the fitment guide for your specific vehicle before ordering.

How does the Club 64C compare with the Club 64CSQ?

The Club 64C has a polypropylene Plus One™ cone, 70W RMS power handling, and 92dB sensitivity. The Club 64CSQ has a carbon fiber cone, a Y40 ferrite magnet, 95W RMS power handling, and 93dB sensitivity.

Explore More

Shop the JBL Club 64C at 12 Volt Outlet. Want to learn more about JBL? Explore our JBL brand profile.