JBL Stadium 962CF 6.5" 2-Way Component Speaker System

Product Overview

Get a more focused, detailed front-stage sound with the JBL STADIUM 962CF 6.5-inch 2-way component speaker system. Its glass-fiber woofer, adjustable UniPivot tweeter, and slim crossover give you useful options for tuning and placing the system in your vehicle.

Key Features & Benefits

• Plus One™ glass-fiber woofer: Its reinforced cone is designed to limit unwanted flex and provide tighter bass and accurate midrange.
• Aluminum dome tweeter: Extended high-frequency response supports detailed playback from compatible audio sources.
• Adjustable tweeter aim: The UniPivot mount lets you direct the tweeter toward the listening position.
• Switchable tweeter level: Choose 0dB or -3dB to adjust the high-frequency balance.
• Slim crossover: Its low-profile design helps with placement in tight door cavities.
• 3-way upgradeable: The system can accommodate a dedicated midrange driver for a later system upgrade.

Technical Specifications

Why Choose This Product?

The STADIUM 962CF combines a 6.5-inch woofer and an aimable tweeter in a component system that gives you control over tweeter level and direction. Its stated frequency response reaches from 35Hz to 40kHz, while the 94dB sensitivity rating describes its output at the specified measurement condition.

Choose this system if you want a component setup with room to add a midrange driver later. The slim crossover profile is also designed with tight door-cavity placement in mind.

Installation & Compatibility Notes

The product details recommend a 4-channel amplifier rated at 100–150W RMS per channel and stable at 2–4 ohms. Account for the system’s 3.0-ohm nominal impedance when choosing an amplifier.

Plan the woofer for a factory door location and the UniPivot tweeter for an A-pillar or sail panel, aimed toward the driver or passenger seat. The supplied guidance recommends 14-gauge or heavier speaker wire for runs over 6 feet. The crossover can be used for the woofer/tweeter split or bypassed with an active crossover.

Check your vehicle’s speaker openings and mounting requirements before ordering; fitment is vehicle-specific.

Frequently Asked Questions

What amplifier is recommended for the JBL STADIUM 962CF?

The supplied guidance recommends a 4-channel amplifier rated at 100–150W RMS per channel and stable at 2–4 ohms. It also suggests a DSP processor for time alignment and active crossover control.

What does the 3.0-ohm nominal impedance mean for amplifier choice?

Choose an amplifier rated stable at the system’s impedance range. The product guidance notes that 3.0 ohms draws more current than a 4-ohm speaker.

Can I add a midrange driver later?

Yes. The 962CF is described as 3-way upgradeable, allowing a dedicated midrange driver to be added to the system.

Can I adjust the tweeter output?

Yes. The tweeter level control switches between 0dB and -3dB.

Will it fit my vehicle?

Confirm the woofer opening, tweeter mounting location, and installation requirements for your specific vehicle before purchase.

Explore More

Shop the JBL STADIUM 962CF at 12 Volt Outlet. Want to learn more about JBL? Explore our JBL brand profile.