Pride Solo 200 6.5 Competition Speakers, 200W RMS (Pair)

Product Overview

The Pride Solo 200 6.5 Competition is a pair of 6.5-inch car audio midrange speakers for custom installations. Each speaker handles 200 W RMS at 4 Ω and uses a pressed-paper cone with a 1.5-inch voice coil on a Kapton former.

The manufacturer recommends an operating range of 160 Hz–10 kHz. An eight-point mounting layout and listed mounting dimensions help you plan the installation.

Key Features & Benefits

• 200 W RMS power handling: Match your amplifier and settings to the stated rating for each speaker.
• 4 Ω nominal impedance: Use the impedance when checking amplifier compatibility.
• Pressed-paper cone: This specified cone material is part of the speaker’s midrange design.
• Kapton voice-coil former: The 1.5-inch voice coil uses a Kapton former.
• Eight-point mounting layout: Check the mounting pattern against your intended baffle or custom mount.

Technical Specifications

Why Choose This Product?

The Solo 200 6.5 Competition gives you a defined set of power, impedance, and frequency-range details to use when planning a custom car audio system. Its listed sensitivity and speaker parameters also help you assess the model alongside your other system components.

The pair format suits an installation requiring two speakers. Review the ratings and measurements together before choosing an amplifier, crossover settings, or mounting location.

Installation & Compatibility Notes

Set amplifier gain and filtering for the 200 W RMS model rating. Use the manufacturer’s power-dependent 160 Hz high-pass guidance when planning crossover settings.

The listed mounting opening is 149 mm, but confirm rear clearance, total depth, and flange measurements with the manufacturer before cutting or ordering custom mounts. Check the eight-point layout and your system’s 4 Ω load requirements during installation planning.

Frequently Asked Questions

Is the 200 W RMS rating for each speaker or the pair?

The listed RMS power handling is 200 W. Match amplifier settings to the model rating during system setup.

What high-pass setting does the manufacturer recommend?

The guidance is 160 Hz, depending on applied power. Use that power-dependent recommendation when planning crossover settings.

What mounting opening is listed?

The mounting opening diameter is 149 mm. Check the complete mounting pattern and required depth before preparing the installation.

What is included?

The box contains one pair of Pride Solo 200 6.5 Competition speakers.

What impedance should I account for?

Each model is listed with a nominal impedance of 4 Ω. Check that your amplifier and system configuration support the intended load.

Explore More

Want to learn more about Pride? Explore our Pride brand profile (opens in a new tab).