JBL Stadium 962M 6x9" 2-Way Coaxial Car Speakers

Product Overview

Bring detailed, full-range sound to a 6x9-inch speaker location with the JBL Stadium 962M 2-way coaxial car speakers. A Plus One™ glass-fiber woofer, textile dome tweeter, and selectable tweeter level control give you a flexible upgrade for a compatible rear deck or door.

Key Features & Benefits

• Plus One™ glass-fiber woofer: Its rigid cone helps deliver tighter bass and more accurate midrange, with bass extension down to 35Hz.
• Extended-range tweeter: The 3/4-inch edge-driven textile dome tweeter reaches 40kHz for high-frequency detail from hi-res audio sources.
• Selectable tweeter level: Choose 0dB or -3dB to adjust the high-frequency balance for your vehicle's acoustics.
• Efficient output: 94dB sensitivity at 2.83V gives you strong output from a factory head unit or aftermarket amplifier.
• Slim crossover design: The crossover integrates into the speaker assembly for a tidier installation.

Technical Specifications

Why Choose This Product?

The Stadium 962M combines a coaxial layout with JBL's Plus One™ cone architecture. Its increased effective cone area compared with a standard 6x9-inch driver is designed to produce more bass output and musical body.

For listeners comparing the Stadium 962M with the Stage3 968MF, the Stadium is a 2-way speaker rated at 120W RMS and 94dB sensitivity. The Stage3 968MF is a 3-way speaker rated at 80W RMS and 92dB sensitivity. The Stadium also has a textile dome tweeter extending to 40kHz.

Installation & Compatibility Notes

The speaker is intended for a factory 6x9-inch rear-deck or door location. Check your vehicle's available space and fitment before ordering. For a fitment check, contact 12 Volt Outlet with your vehicle's year, make, and model.

For an external amplifier, the source recommends a 4-channel model rated at 75–130W RMS per channel and stable at 2–4 ohms. The 3.0-ohm speaker draws slightly more current than a 4-ohm speaker, so choose an amplifier with adequate headroom. For wire runs over 6 feet, use 14-gauge or heavier speaker wire. A DSP processor with time alignment can further enhance imaging and staging.

Frequently Asked Questions

Can I use the Stadium 962M with my factory head unit?

Yes. Its 94dB sensitivity supports use with a factory head unit. An external amplifier is recommended to make fuller use of its power handling and dynamic range.

What amplifier should I pair with these speakers?

Choose a 4-channel amplifier rated at 75–130W RMS per channel and stable at 2–4 ohms. Allow for the speaker's 3.0-ohm nominal impedance when selecting an amplifier.

Will the Stadium 962M fit my vehicle?

It is designed for 6x9-inch OEM rear-deck or door locations. Confirm your vehicle's fitment before ordering.

How does the Stadium 962M compare with the Stage3 968MF?

The Stadium 962M is a 2-way coaxial rated at 120W RMS and 94dB sensitivity. The Stage3 968MF is a 3-way coaxial rated at 80W RMS and 92dB sensitivity.

Can I adjust the tweeter output?

Yes. The selectable control offers 0dB and -3dB settings for adjusting high-frequency balance.

Explore More

Explore the JBL brand profile to learn more about JBL products, and shop 12 Volt Outlet for your car audio upgrade.